Windows 7 Does Not Reload After Hibernation / Sleep
Sep 13, 2011
This happens very frequently. It happens on and off. I am running Windows 7 professional on Dell Inspiron E1505 and when my computer goes into hibernation ( it doesn't matter if it's on battery or plugged in), sometimes I can reload the computer physically. Sometimes or most times, it shows a black screen and I have to manually shut the PC up and then reload it losing everything which I had before going into hibernation.
View 2 Replies
ADVERTISEMENT
May 14, 2012
I built a new computer with:
I7 2600k
MSI Z77-gd55 motherboard
4 gb of ddr3 crucial 1066 ram
1 tb WDEARX Caviar HD (op sys)
1 tb seagate barracuda
Corsair AX750 Gold PSU
Nvidia EVGA gtx 560 2gb
I installed a clean windows 7 installation, Worked fine for a bit and now when I put it into sleep mode it BSOD coming out. In hibernation it requires me to hit the power button to come back and when it does it just comes up with a windows black screen with white lighting saying "windows could not recover the data to load windows" then i need to coose to loose the data and restart or try and load the data (which never works).I have the minidump file that I ran in debugger and and analyzed, which I am pasting here since idk how to upload it;
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�51112-28735-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code]....
View 1 Replies
View Related
Apr 13, 2012
I've been getting frequent BSOD after Windows goes to Sleep. I'm getting BAD_SYSTEM_CONFIG_INFO, KERNEL_DATA_INPAGE_ERROR and CRITICAL_OPJECT_TERMINATION errors pretty regularly. I ran chkdsk on my C: drive and got a registry file failure. This is a fairly recent build (<8 months).
Specs:
OS: Windows 7 Home Premium 64bit retail
CPU: Intel Core i7-2600K CPU @ 3.40GHz
Motherboard: ASUS P8P67 Pro
Memory: PNY 4GB DDR3 PC3-10666; PNY 2x@GB DDR3 PC3-10666
Graphic Card: NVIDIA GeForce GTS 250
Monitor(s) Displays: Dell S199WFP; Generic PnP Monitor
Screen Resolution: 1440 x 900; 1280 x 1024
Hard Drives:
Seagate 1TB SATA (ST3100003 40AS SCSI)
Western Digital Caviar Green 2TB, 32 MB Cache (WDC WD20 EADS-00R6B0 SCSI)
View 7 Replies
View Related
May 2, 2012
I've got it to work flawlessly on my desktop, however on my laptop, a Dell D630, I can't seem to get it to work. I've created a task triggering on a specific time and running the operation '/c "exit"', which should just start a command prompt and close it again. I've set it to "run with highest privileges" and "wake the computer to run this task". However, it just doesn't boot as scheduled.
The history of the scheduler says nothing at the moment that the trigger is set to go off, but a minut later (probably when I manually boot) I get a "Task scheduler "{....}" instance of the task "Wakeup" due to a time trigger condition."
View 3 Replies
View Related
Jul 21, 2012
I am having a problem where my laptop doesn't got into sleep / hibernation mode when the battery is running low. It just shuts down suddenly causing the machine to give me an error about not been shut down property upon reboot.
View 7 Replies
View Related
Mar 11, 2011
I want to say 2 days ago, my computer has decided to fail when going to sleep. It is Windows 7, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors and external hard drive are never turned on as they once were and the machine just sits there running with a black screen. I restart, boot back into Windows and it says resume (as if it was in hibernation, but I have hybrid sleep on) and I just get a flashing underscore and no more. I restart once again, it says Windows could not restore the session, I start a new session and all is good again... until the computer falls asleep and the process starts over.
I have tried turning off hybrid sleep. No good. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once the upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recenly is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck.
View 9 Replies
View Related
Jul 16, 2011
I am running Windows 7 Home Premium. I have the system set up to run two applications at certain times - Norton Scans being one.
Yesterday, it missed a scan and I suspect it was because of the power saving options - the computer is set to go to sleep after 30 minutes.
Does anyone know whether that is the case and if there is anyway to set up the power saving so that any timed applications will run OK?
View 2 Replies
View Related
Oct 28, 2012
BSOD at many random time
==================================================
Dump File : 102712-27050-01.dmp
Crash Time : 10/27/2012 5:53:42 PM
Bug Check String : BAD_POOL_CALLER
Bug Check Code : 0x000000c2
Parameter 1 : 0x00000007
[code].....
View 2 Replies
View Related
Mar 26, 2012
I have, in my Control Panel, timers set for both Sleep mode and Hibernation modes (Advanced settings). However, neither one of them ever functions.
View 5 Replies
View Related
Dec 21, 2011
when i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
View 2 Replies
View Related
Jun 17, 2010
so I have 10,000msecond(2.7hour) shortcut to shutdown my computer ("C:WindowsSystem32shutdown.exe -s -t 10000") which i use for watching films before bed, just encase i sleep half way through but I was wondering if there was a way to make a similar shortcut but instead of making your computer shutdown in a few hours make it sleep in a few hours time. Now I know how to make a sleep shortcut but that makes the computer sleep instantly, and putting "-t 10000" at the end of "C:WindowsSystem32 .exe powrprof.dll,SetSuspendState 0,1,0" doesnt work. Apparently their is a way to do it if you install some software but I don't want that.
View 9 Replies
View Related
Apr 20, 2011
I live in a place where we have power shortages from time to time. I have my Dell desktop pc attached to a UPS and i have configured the pc to go to sleep after 5 minutes when on UPS. Is there anyway to wake up the pc automatically once the power is on? I have connected my UPS with USB cable to the pc, and the pc treats the UPS as a battery. I use this pc as a media centre so this feature is something i really need.
View 4 Replies
View Related
Sep 14, 2011
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
View 9 Replies
View Related
Feb 10, 2011
Whatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
View 3 Replies
View Related
Dec 7, 2011
I recently formatted, and since, my pc refuses to remain in Sleep/Hibernation mode. When I select the option in the start menu, my pc does its thing, once it enters sleep/hibernation, it instantly powers back up. I have changed nothing to my pc's hardware since the format, and this issue never occurred before hand.
Some of the things I have tried are making sure the power management setting were correct. I also hard reset my motherboards cmos to manufacturer settings.
The above seemed to make no difference.
View 7 Replies
View Related
Apr 12, 2012
I have an ASUS Zenbook UX21E, 128SSD, 4GB RAM, running Windows 7 Home Premium 64 bits.I'm having a problem with Windows crashing and rebooting after waking up from sleep or hibernation. It manages to show the welcome screen (whre you put your password) but after a few seconds it reboots.i'm attaching the Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML files. My System Health Report file is in Spanish, I hope it is still usefull. Further information:
- Windows OEM versi, original installation.
- I have uninstalled all ASUS utilities related to power management
- The computer is from january 2011.
View 5 Replies
View Related
Apr 22, 2012
Laptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software
Laptop starts up and can shuts down with out any problem.If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.All drivers have been update using driver dating utility by WinZip.Dump files & system health check report is attached.
View 1 Replies
View Related
Jun 12, 2011
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
View 2 Replies
View Related
Dec 8, 2012
When I put my computer in hibernation, sometimes when I wake it, it hangs at the user select screen, or it just shows a black screen. Sometimes I can reset the computer after it has hanged, and try again resuming from hibernation, and many times it will work after a couple of tries. Other times after resetting I won't get the prompt to try again with resuming (the other option is to delete hibernation data and reboot the system) but I will get the usual screen that says that Windows was not shut down correctly (with all the options for safe mode, etc). If I cannot resume and I get the screen with safe mode and all the other crap, I finally log in I get a notice that there was a critical error, in the details I see BlueScreen and other data, but I actually never get a blue screen. In the dump folder, there are no dmp files related to the hibernation hanging.
Anyway, when it happens, I see several Event 18 WHEA-Logger in the event viewer, about 6 of them every time.What's weird though, is that I literally have NO problems with this computer other than this. The only times it hangs is when I resume it from hibernation. I can play games or run stress tests with or without overclock and the system is 100% stable. But there is some problem that prevents it from resuming from hibernation correctly, so every time I use it is basically a gamble because it has like 50% chance of working.I tried EVERY SINGLE solution I found with google related to hibernation problems, and it's still there. I even formatted and reinstalled Windows from scratch, and it's still there. I'm positive I updated every single driver for every hardware I have and nope, no solution.I know the WHEA error is related to the hardware but like I said, everything works PERFECTLY once the system starts up properly, or when it resumes from hibernation properly. [code]
View 6 Replies
View Related
Sep 17, 2010
How do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
View 1 Replies
View Related
Jun 22, 2012
My wife's Dell M1330 was updated from Vista to Windows 7 several years, ago and now the hard disk is corrupted. Can I use the upgrade CD to reload Windows 7?
View 2 Replies
View Related
Mar 7, 2012
I'm running Win7 64-bit on a home-built machine. I'm trying to reformat C drive.OK. So, my bios is set to boot only from CD. My keyboard is enabled in the bios. Yet when I use F12 to enter boot menu, hdd is shown as selected. When I scoll down, select CD and hit enter, my machine still boots from hdd. I have used imgburn to burn a new copy of the Win7 DVD in case mine was faulty..
View 7 Replies
View Related
May 28, 2012
After reloading Windows 7 on an Acer Aspire, message " Windows could not start the installation process " appears. how to complete the Windows reload process?
View 2 Replies
View Related
Dec 29, 2011
I need to wipe my hard drive and reload Windows 7, Toshiba Satellite C655-S5049 I Dont have the Recovery dvd I made when it was first got
View 1 Replies
View Related
Apr 15, 2012
My laptop suddenly decided to not run, it gets to "starting windows" but will not go any further. I`ve tried to boot from the OS disc to do a repair but it still goes to "starting windows". If i select "repair computer" at start up without the OS disc it stays at that window and will not go any further, I can`t even get an option when booting from OS disc to format and reload windows. The HDD is spinning so i know it`s getting power. I can run Linux live cd so i`m presuming it`s probably the HDD is fried even though it`s spinning. I even took ouit nthe HDD and connected it to my desktop but the desktop wouldn`t recognise it.
View 8 Replies
View Related
Feb 6, 2013
So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.
Is there a way to install it without having to reload the entire O/S again?
View 9 Replies
View Related
Oct 19, 2009
Will I have to reload Windows 7 Home Premium RTM, if I purchase a Windows 7 Home Premium Upgrade under the Student price of $29.99?
I signed up for it, but did not purchase it yet, been waiting till October 22nd got close.
View 9 Replies
View Related
Apr 9, 2012
how i reload my laptop
View 3 Replies
View Related
May 24, 2010
I am using a proper Windows 7 Ultimate disc to reload windows via the upgrade option. This is something I have done in the past without problems. I have tried for the last 2 days and after 5 hours and at the point of booting up into windows gives me the message that the upgrade has been unsuccessful and is reloading the previous version. Can anyone tell me why. The original version on my laptop is a legit copy as is the disc I have which is also the disc the copy on my laptop was originally installed from.
View 9 Replies
View Related
Jun 6, 2012
Is there any way to backup the history and/or database of currently recorded programs so that if the system is re-loaded, one can re-load the history and current database? I have the actual recordings on a separate disk so reloading the system will not delete the video files.
View 1 Replies
View Related
Jan 8, 2012
Need to reload software for my dvd and tv tuner card
View 2 Replies
View Related
