Can't Wake-up From Sleep/hibernation?
Mar 11, 2011
I want to say 2 days ago, my computer has decided to fail when going to sleep. It is Windows 7, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors and external hard drive are never turned on as they once were and the machine just sits there running with a black screen. I restart, boot back into Windows and it says resume (as if it was in hibernation, but I have hybrid sleep on) and I just get a flashing underscore and no more. I restart once again, it says Windows could not restore the session, I start a new session and all is good again... until the computer falls asleep and the process starts over.
I have tried turning off hybrid sleep. No good. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once the upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recenly is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck.
View 9 Replies
ADVERTISEMENT
Apr 20, 2011
I live in a place where we have power shortages from time to time. I have my Dell desktop pc attached to a UPS and i have configured the pc to go to sleep after 5 minutes when on UPS. Is there anyway to wake up the pc automatically once the power is on? I have connected my UPS with USB cable to the pc, and the pc treats the UPS as a battery. I use this pc as a media centre so this feature is something i really need.
View 4 Replies
View Related
May 2, 2012
I've got it to work flawlessly on my desktop, however on my laptop, a Dell D630, I can't seem to get it to work. I've created a task triggering on a specific time and running the operation '/c "exit"', which should just start a command prompt and close it again. I've set it to "run with highest privileges" and "wake the computer to run this task". However, it just doesn't boot as scheduled.
The history of the scheduler says nothing at the moment that the trigger is set to go off, but a minut later (probably when I manually boot) I get a "Task scheduler "{....}" instance of the task "Wakeup" due to a time trigger condition."
View 3 Replies
View Related
May 23, 2011
Earlier today, my laptop wouldn't wake up from hibernation, so i restarted it. I got it started and it said there was a windows error and suggested i boot up as normal. I did that and it was all running fine. But the sound wasn't working! The issue of sound not working has happened before so i just restarted the computer (because that has fixed the problem in the past). It started the boot up as normal and almost made it to the log in screen, but wouldn't pass the black screen before the log in. I thought that was very odd so i restarted it after waiting about ten minutes of nothing happening. It then started up with the suggestion to run the start up repair program. I highlighted that and hit enter. it started up, went to a black screen, then after about 3 or 4 minutes, loaded what looked like a blueish wallpaper. it didn't do anything after that for about 15 minutes, then it loaded the repair program. I ran that for 40 minutes but it didn't appear to do anything so i hit cancel. It then gave me the option to do a system restore, which i did. I restored my system to about 2 weeks ago, seeing as i didn't have any problems 2 weeks ago. It restarted and booted up, this time staying on the black screen for about 3 minutes, then going to the log in. It logged in perfectly fine, but there's still no sound. I tried opening the troubleshooter, but it won't open. For some reason, Google chrome works fine, and task manager does too, but some programs won't open. It's like, they try to open, and the task manager says they're running, but they won't appear on screen. Programs like, Steam client, iTunes, System recovery. Those were three different ones that i tried and didn't work. It appears to be quite random. I tried running Boost speed to see if it could diagnose a problem, but it said that it couldn't connect to the drives. I ran my antivirus software to see if it was a virus causing the problem, but it came up with the same error! I really am at a loss for what's going on! This laptop is only 5 or 6 months old. The drives shouldn't be failing already. [code]
View 2 Replies
View Related
Feb 11, 2013
I'm not sure if this is the right place to post this..but..my laptop HP ProBook 4540s..i just bought it...i make it to go to stanby mode..but when i press the ON button..from the lights I see the laptop is ON..i hear windows sounds..but I don't see any picture..if I'm not mistaken it happens with both standby and hibernation modes
View 5 Replies
View Related
Nov 28, 2011
Here's my problem:I have a netbook (HP mini 311) that came with Windows XP, and then I've installed windows 7 on it.When the computer goes to hibernation either because the battery is getting too low or that I close the lid (as I choosed these in the power options) , the computer won't successfully boot up to the "Resuming windows" screen. And what I should do is to turn it on and off 3 times, and so it starts normally (to resume windMore notes: at first boot screen (where the hp logo is) , at the bottom right of it, there's usually a "Press esc for startup options" text, that doesn't appear by the 3 first boot ups tries.
View 2 Replies
View Related
Mar 26, 2011
Is it possible to wake my computer from hibernation to stream content to, lets say, an Xbox 360? Then after its done streaming put the computer back to sleep?
View 3 Replies
View Related
Jul 16, 2011
I am running Windows 7 Home Premium. I have the system set up to run two applications at certain times - Norton Scans being one.
Yesterday, it missed a scan and I suspect it was because of the power saving options - the computer is set to go to sleep after 30 minutes.
Does anyone know whether that is the case and if there is anyway to set up the power saving so that any timed applications will run OK?
View 2 Replies
View Related
Oct 28, 2012
BSOD at many random time
==================================================
Dump File : 102712-27050-01.dmp
Crash Time : 10/27/2012 5:53:42 PM
Bug Check String : BAD_POOL_CALLER
Bug Check Code : 0x000000c2
Parameter 1 : 0x00000007
[code].....
View 2 Replies
View Related
Mar 26, 2012
I have, in my Control Panel, timers set for both Sleep mode and Hibernation modes (Advanced settings). However, neither one of them ever functions.
View 5 Replies
View Related
Dec 21, 2011
when i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
View 2 Replies
View Related
Jun 17, 2010
so I have 10,000msecond(2.7hour) shortcut to shutdown my computer ("C:WindowsSystem32shutdown.exe -s -t 10000") which i use for watching films before bed, just encase i sleep half way through but I was wondering if there was a way to make a similar shortcut but instead of making your computer shutdown in a few hours make it sleep in a few hours time. Now I know how to make a sleep shortcut but that makes the computer sleep instantly, and putting "-t 10000" at the end of "C:WindowsSystem32 .exe powrprof.dll,SetSuspendState 0,1,0" doesnt work. Apparently their is a way to do it if you install some software but I don't want that.
View 9 Replies
View Related
Sep 13, 2011
This happens very frequently. It happens on and off. I am running Windows 7 professional on Dell Inspiron E1505 and when my computer goes into hibernation ( it doesn't matter if it's on battery or plugged in), sometimes I can reload the computer physically. Sometimes or most times, it shows a black screen and I have to manually shut the PC up and then reload it losing everything which I had before going into hibernation.
View 2 Replies
View Related
May 14, 2012
I built a new computer with:
I7 2600k
MSI Z77-gd55 motherboard
4 gb of ddr3 crucial 1066 ram
1 tb WDEARX Caviar HD (op sys)
1 tb seagate barracuda
Corsair AX750 Gold PSU
Nvidia EVGA gtx 560 2gb
I installed a clean windows 7 installation, Worked fine for a bit and now when I put it into sleep mode it BSOD coming out. In hibernation it requires me to hit the power button to come back and when it does it just comes up with a windows black screen with white lighting saying "windows could not recover the data to load windows" then i need to coose to loose the data and restart or try and load the data (which never works).I have the minidump file that I ran in debugger and and analyzed, which I am pasting here since idk how to upload it;
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�51112-28735-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code]....
View 1 Replies
View Related
Apr 13, 2012
I've been getting frequent BSOD after Windows goes to Sleep. I'm getting BAD_SYSTEM_CONFIG_INFO, KERNEL_DATA_INPAGE_ERROR and CRITICAL_OPJECT_TERMINATION errors pretty regularly. I ran chkdsk on my C: drive and got a registry file failure. This is a fairly recent build (<8 months).
Specs:
OS: Windows 7 Home Premium 64bit retail
CPU: Intel Core i7-2600K CPU @ 3.40GHz
Motherboard: ASUS P8P67 Pro
Memory: PNY 4GB DDR3 PC3-10666; PNY 2x@GB DDR3 PC3-10666
Graphic Card: NVIDIA GeForce GTS 250
Monitor(s) Displays: Dell S199WFP; Generic PnP Monitor
Screen Resolution: 1440 x 900; 1280 x 1024
Hard Drives:
Seagate 1TB SATA (ST3100003 40AS SCSI)
Western Digital Caviar Green 2TB, 32 MB Cache (WDC WD20 EADS-00R6B0 SCSI)
View 7 Replies
View Related
Sep 14, 2011
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
View 9 Replies
View Related
Feb 10, 2011
Whatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
View 3 Replies
View Related
Dec 7, 2011
I recently formatted, and since, my pc refuses to remain in Sleep/Hibernation mode. When I select the option in the start menu, my pc does its thing, once it enters sleep/hibernation, it instantly powers back up. I have changed nothing to my pc's hardware since the format, and this issue never occurred before hand.
Some of the things I have tried are making sure the power management setting were correct. I also hard reset my motherboards cmos to manufacturer settings.
The above seemed to make no difference.
View 7 Replies
View Related
Apr 12, 2012
I have an ASUS Zenbook UX21E, 128SSD, 4GB RAM, running Windows 7 Home Premium 64 bits.I'm having a problem with Windows crashing and rebooting after waking up from sleep or hibernation. It manages to show the welcome screen (whre you put your password) but after a few seconds it reboots.i'm attaching the Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML files. My System Health Report file is in Spanish, I hope it is still usefull. Further information:
- Windows OEM versi, original installation.
- I have uninstalled all ASUS utilities related to power management
- The computer is from january 2011.
View 5 Replies
View Related
Jul 21, 2012
I am having a problem where my laptop doesn't got into sleep / hibernation mode when the battery is running low. It just shuts down suddenly causing the machine to give me an error about not been shut down property upon reboot.
View 7 Replies
View Related
Dec 21, 2011
It's my first time posting! I've been browsing this forum and many sites on google trying to find the solution to my problem, but I can't really understand what is going on, even when taking a look at the dump file. I ran memtest, did all the usual things, but no sign of source of error to pin point. Every single time I put my laptop to sleep and keep it like that for longer amount of time (I think it's about 20 minutes) I can't get my laptop back from sleep in a normal fashion. What I mean is, that the screen never turns back off, stays completely black, my external monitor doesn't turn on either, just goes to idle mode. After reboot I get a message that there was a blue screen error and I can try to look for solution online. I read that my SSD HDD might be the cause of it, but after updating the firmware the problem persisted and after looking at my memory dumps, I found out that DirectX kernel is causing the problems, but updating it didn't yield any results, the problem persists, so perhaps I am missing something in the dumps that aren't that obvious to spot.My RAM aren't stock that came with computer, both chips 4GB each are aftermarket ones, but I have no issues with anything when using the computer except when it is waking up and MEMTEST didn't throw me any errors after an overnight pass.
View 1 Replies
View Related
Jan 6, 2013
CPU = Intel i7-860
MOBO = Gigabyte ga-p55a-ud4p
RAM = G.Skill 4x4gb 1333mhz
PSU = Corsair TX 650 watts
GPU = Nvidia GTX 480
HDD 1 = W.Digital 7200 rpm (1 TB)
HDD 2 = *NEW* SSD Samsung 840 (256 GB)
The new SSD is my boot drive with a legit Windows 7 Ultimate 64 bit. I have the repair discs also if necessary.Problem = Many, but not all, of my wakes from sleep result in a blue screen of death. (I have no other BSODs)Also, this never happened using my old HDD.Two recent BSODs with different error codes = [URL]I have installed the MOBO CD drivers and the latest NVIDIA GPU drivers and latest SSD firmware (before OS install).Are there any other drivers I might have missed?SFC /SCANNOW detects no integrity violations.CHKDSK on both the SSD and HDD detects no problems.Windows Memory Diagnostic detects no problems.
View 1 Replies
View Related
Jun 3, 2012
Just built my new computer, and everything, including sleep, worked perfectly. I then installed GRA4 off Steam, and now when the computer wakes up it does NOT blue screen-rather the monitor inverts color, pixelates heavily, and then freezes. I cannot, or the life of me,
[Code]...
View 1 Replies
View Related
Jul 8, 2012
My problem usually comes when I put my computer to sleep, and then wake it up. Instead of just jumping right to the desktop screen, it now goes back to the motherboard screen and does a resuming windows operation that takes 5x as long as it used to.
Sometimes this problem causes the computer to simply restart and get a BSOD, when I am in the process of resuming windows.
EDIT: I believe I have actually gotten 2 separate BlueScreen reports during this... d1 1033, and 1e 1033.
Windows 7 x64
i5 3570k
HD 6950
1tb HD
8gb RAM
750W PSU
View 3 Replies
View Related
Jul 17, 2009
I installed 7RC a couple of months ago. Since then whenever my pc sleeps I can not wake it up. It used to wake up fine in XP. To get it going again I have to cold reboot or pull the plug. When it comes back up everything I was doing is still there, I just have to enter my password. I think I have all the settings right but if someone could run me through everything that needs to be set I'd be really grateful.
View 9 Replies
View Related
Sep 28, 2009
I have a bsod problem at wake-up from sleep on windows 7 x64 ultimate.
View 2 Replies
View Related
Sep 21, 2010
I am not savvy in this kind of stuff. My husband has a home built computer that runs our tv system with windows media center. He had to leave on a military deployment and right before he left he had to reinstall the OS. Since then the computer refuses to wake from sleep mode. I have to scram it to get it to come back up. Since we run the media center it ought to wake up to record automatically, but it isn't doing that either. I've checked all the power options but that doesn't seem to be the problem. Although, at this point, I really have no clue.
View 8 Replies
View Related
Feb 19, 2011
Mobo Intel DP55WB. Computer cant enter into standby. In event Viewer I found System: e1kexpress - Intel 8257DC Gigabit Network Connection- Network is disconnected and 3 seconds later Intel 8257DC Gigabit Network Connection - Network link has been established at 1Gbps full duplex following in 2 seconds The PCP/IP NetBIOS Helper service enetered the running state following in 2 seconds Power troubleshooter -> The system has resumed from sleep . sleep time approximately 10 seconds The mobo's BIOS doesn't have Wake on Lan on/off option.
Does Windows has any overriding power settings?
View 2 Replies
View Related
Aug 6, 2009
Hi new user here, my RTM copy used to go to standby and wake up fine but recently when I try to power it up the machine will appear to start up, but my screen, keyboard and mouse do not wake up, also my wifi light does not turn on either.
The only way to get on to my pc is to do a hard restart.
I believe this might help:
Power Efficiency Diagnostics Report
Computer Name KYLE-PC Scan Time 2009-08-06T10:10:33Z Scan Duration 60 seconds System Manufacturer DIXONSXP System Product Name DIXONSXP BIOS Date 04/12/2007 BIOS Version 1.00.DIX OS Build 7600 Platform Role PlatformRoleMobile Plugged In true Process Count 61 Thread Count 793 Report GUID {15f6f462-9d4b-4faa-a8b5-f49855e75b24} Analysis Results
Errors
Power Policy:Sleep timeout is disabled (Plugged In)
The computer is not configured to automatically sleep after a period of inactivity.
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name RT73 USB Wireless LAN Card Host Controller ID PCIVEN_8086&DEV_27CC Host Controller Location PCI bus 0, device 29, function 7 Device ID USBVID_148F&PID_2573 Port Path 3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name USB Root Hub Host Controller ID PCIVEN_8086&DEV_27CC Host Controller Location PCI bus 0, device 29, function 7 Device ID USBVID_8086&PID_27CC Port Path
CPU Utilization:Processor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization.
Average Utilization (%) 14.90
Battery:Last Full Charge (%) The battery stored less than 40% of the Designed Capacity the last time the battery was fully charged.
Battery ID DIXONSXP DIXONSXP Design Capacity 2000 Last Full Charge 797 Last Full Charge (%) 39
The report points to my wifi card being the source of the problem yet I have tried disabling it and the same occurs.
View 7 Replies
View Related
Jan 27, 2012
I know there has to be a simple fix to this but I'm banging my head against the wall right now trying to figure this out. Everytime my PC goes to sleep I'll press a button on my keyboard or move my mouse and it will wake up just fine, but the monitor won't wake up. I've also noticed that the backlight on my keyboard doesn't show up. I've tried different monitors and removed the VGA cable from the graphics card after waking up and plugged it back in and no video. I have to reboot the computer to get video again and everything works great.. until it goes into sleep mode again. I have updated my graphics card driver (Geforce GT 210) and still no fix. I haven't made any changes that would cause this. Someone has to know something about this
View 5 Replies
View Related
May 31, 2012
Usually, the power management sleep mode shuts down the system, including the power switch indicator, which must be depressed to wake the machine back up and resume Windows. So long as the power indicator remains lit, it takes only a touch of the pad to start up again.
Lately, however, the system goes to sleep (as do I), but the power indicator stays lit. When I return, the system is completely unresponsive. I have to hold the power switch, shut down abnormally, then reboot the system from scratch.
View 4 Replies
View Related