I am having a problem where my laptop doesn't got into sleep / hibernation mode when the battery is running low. It just shuts down suddenly causing the machine to give me an error about not been shut down property upon reboot.
View 7 RepliesHow do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
I have Windows 7 (64 bit) on Samsung RV520 - it's a new laptop, I got it about 5 weeks ago. The problem is that after the computer wakes up from sleep mode, the Internet connection is lost and the Network and Sharing Center is not responding at all. Sometimes it does not detect any networks (neither the cable one nor the wifi connection), sometimes it recognizes them but gives "cannot connect" message, sometimes it says I'm connected, but nothing Internet-related works anyway. Either way, every time my laptop goes into sleep mode and I want to access Internet, I have to restart the system, and well.. this is rather annoying.
It's not about the Intenet provider, since on the roommate's laptop all the connections work perfectly fine.
I have realtek ALC898, part of gigabyte Z77 UD5h mobo, windows 7 ultimate 64bit. Rear jack speakers always work, sound always works. But after sleep, the front panel audio jack does not work, ie headphones silent.
Workaround 1) go to device manager, disable realtek high definition audio, then enable it, then front panel audio jack works properly. workaround 2) restart the computer and it works again.
I tried disabling sleep and using hibernate, since I read somewhere that hibernate is like a restart, but apparently it is not. Using hibernate, once it resumes from hibernate, front jack still doesnt work just like using sleep mode.
It sounds like resuming from sleep mode or hibernate mode, that windows 7 is failing to reinitialize some of the realtek audio drivers, at least those associated with front panel audio jack for headphones. So have to restart or disable/enable realtek high def audio in device manager. I have most recent realtek drivers, tried both from realtek, and most recent from Gigabyte, both have same issue. My windows 7 is fully up to date.
Am I right in this is just failure of 7 to reinitialize some drivers?
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
I recently formatted, and since, my pc refuses to remain in Sleep/Hibernation mode. When I select the option in the start menu, my pc does its thing, once it enters sleep/hibernation, it instantly powers back up. I have changed nothing to my pc's hardware since the format, and this issue never occurred before hand.
Some of the things I have tried are making sure the power management setting were correct. I also hard reset my motherboards cmos to manufacturer settings.
The above seemed to make no difference.
Sleep Mode It's Same Shut down But Save Time For Startup Again But Use More Energy ?
View 3 Replies View RelatedI have an Acer Aspireone d255 netbook that cannot recover after it has gone into sleep mode when on battery. My computer geek had a look at it and said it had diseases which he removed and put combofix, mbam and superantispy on the netbook.
View 2 Replies View RelatedI was watching a movie and forgot about the battery being low then suddenly my laptop went into hibernation mode(screen went black) when I plugged in the ac adapter I pressed the power button and it stated "Resume windows" and I'm worried if it can damage/harm the laptop. My question is can this damage/harm the laptop?
View 2 Replies View RelatedThis happens very frequently. It happens on and off. I am running Windows 7 professional on Dell Inspiron E1505 and when my computer goes into hibernation ( it doesn't matter if it's on battery or plugged in), sometimes I can reload the computer physically. Sometimes or most times, it shows a black screen and I have to manually shut the PC up and then reload it losing everything which I had before going into hibernation.
View 2 Replies View RelatedI built a new computer with:
I7 2600k
MSI Z77-gd55 motherboard
4 gb of ddr3 crucial 1066 ram
1 tb WDEARX Caviar HD (op sys)
1 tb seagate barracuda
Corsair AX750 Gold PSU
Nvidia EVGA gtx 560 2gb
I installed a clean windows 7 installation, Worked fine for a bit and now when I put it into sleep mode it BSOD coming out. In hibernation it requires me to hit the power button to come back and when it does it just comes up with a windows black screen with white lighting saying "windows could not recover the data to load windows" then i need to coose to loose the data and restart or try and load the data (which never works).I have the minidump file that I ran in debugger and and analyzed, which I am pasting here since idk how to upload it;
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:WindowsMinidump�51112-28735-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
[code]....
I've been getting frequent BSOD after Windows goes to Sleep. I'm getting BAD_SYSTEM_CONFIG_INFO, KERNEL_DATA_INPAGE_ERROR and CRITICAL_OPJECT_TERMINATION errors pretty regularly. I ran chkdsk on my C: drive and got a registry file failure. This is a fairly recent build (<8 months).
Specs:
OS: Windows 7 Home Premium 64bit retail
CPU: Intel Core i7-2600K CPU @ 3.40GHz
Motherboard: ASUS P8P67 Pro
Memory: PNY 4GB DDR3 PC3-10666; PNY 2x@GB DDR3 PC3-10666
Graphic Card: NVIDIA GeForce GTS 250
Monitor(s) Displays: Dell S199WFP; Generic PnP Monitor
Screen Resolution: 1440 x 900; 1280 x 1024
Hard Drives:
Seagate 1TB SATA (ST3100003 40AS SCSI)
Western Digital Caviar Green 2TB, 32 MB Cache (WDC WD20 EADS-00R6B0 SCSI)
I've got it to work flawlessly on my desktop, however on my laptop, a Dell D630, I can't seem to get it to work. I've created a task triggering on a specific time and running the operation '/c "exit"', which should just start a command prompt and close it again. I've set it to "run with highest privileges" and "wake the computer to run this task". However, it just doesn't boot as scheduled.
The history of the scheduler says nothing at the moment that the trigger is set to go off, but a minut later (probably when I manually boot) I get a "Task scheduler "{....}" instance of the task "Wakeup" due to a time trigger condition."
I want to say 2 days ago, my computer has decided to fail when going to sleep. It is Windows 7, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors and external hard drive are never turned on as they once were and the machine just sits there running with a black screen. I restart, boot back into Windows and it says resume (as if it was in hibernation, but I have hybrid sleep on) and I just get a flashing underscore and no more. I restart once again, it says Windows could not restore the session, I start a new session and all is good again... until the computer falls asleep and the process starts over.
I have tried turning off hybrid sleep. No good. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once the upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recenly is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck.
I am running Windows 7 Home Premium. I have the system set up to run two applications at certain times - Norton Scans being one.
Yesterday, it missed a scan and I suspect it was because of the power saving options - the computer is set to go to sleep after 30 minutes.
Does anyone know whether that is the case and if there is anyway to set up the power saving so that any timed applications will run OK?
BSOD at many random time
==================================================
Dump File : 102712-27050-01.dmp
Crash Time : 10/27/2012 5:53:42 PM
Bug Check String : BAD_POOL_CALLER
Bug Check Code : 0x000000c2
Parameter 1 : 0x00000007
[code].....
After playing ESV Skyrim for a bit, i put it into hibernation mode accidentaly, by shutting down my laptop. As soon as i loaded it back up again, no audio played. When i go on to audio mixer it either crashes and says theres a problem, or i move it to turn the volume up, and it doesn't make a sound!
View 1 Replies View RelatedI have, in my Control Panel, timers set for both Sleep mode and Hibernation modes (Advanced settings). However, neither one of them ever functions.
View 5 Replies View Relatedwhen i did the powercfg -LASTWAKE, it didn't show the wake source, same thing in event viewer, how do i know what's causing this?
Wake History Count - 1
Wake History [0]
Wake Source Count - 0
so I have 10,000msecond(2.7hour) shortcut to shutdown my computer ("C:WindowsSystem32shutdown.exe -s -t 10000") which i use for watching films before bed, just encase i sleep half way through but I was wondering if there was a way to make a similar shortcut but instead of making your computer shutdown in a few hours make it sleep in a few hours time. Now I know how to make a sleep shortcut but that makes the computer sleep instantly, and putting "-t 10000" at the end of "C:WindowsSystem32 .exe powrprof.dll,SetSuspendState 0,1,0" doesnt work. Apparently their is a way to do it if you install some software but I don't want that.
View 9 Replies View RelatedI live in a place where we have power shortages from time to time. I have my Dell desktop pc attached to a UPS and i have configured the pc to go to sleep after 5 minutes when on UPS. Is there anyway to wake up the pc automatically once the power is on? I have connected my UPS with USB cable to the pc, and the pc treats the UPS as a battery. I use this pc as a media centre so this feature is something i really need.
View 4 Replies View RelatedWhatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
View 3 Replies View RelatedThis is an acer aspire laptop that is stuck in hibernation/sleep mode. It has windows 7, the power light blinks, no response whatsoever to windows key or any other keys including ctrl alt del. I have checked without memory and hard drive and have the same results. It will power off but will not get out of hibernation mode while it is turned on.
View 1 Replies View RelatedI have an ASUS Zenbook UX21E, 128SSD, 4GB RAM, running Windows 7 Home Premium 64 bits.I'm having a problem with Windows crashing and rebooting after waking up from sleep or hibernation. It manages to show the welcome screen (whre you put your password) but after a few seconds it reboots.i'm attaching the Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML files. My System Health Report file is in Spanish, I hope it is still usefull. Further information:
- Windows OEM versi, original installation.
- I have uninstalled all ASUS utilities related to power management
- The computer is from january 2011.
My husbands laptop has been having this problem now for a few weeks Win 7 32 been working fine for over a year. The red x showed up on the battery a few weeks ago saying replace battery soon. We all know this is NOT a windows 7 problem b/c MS says so I let it charge to a 100% and die on its own a few times and the x went away for a few days. Then it came back and now the computer will not sleep. Power setting on all the laptops are the same and have been the same. Low battery 10% do nothing critical 6% sleep. But when it reaches 6% it acts like it is going to sleep and then it starts again. I checked to see if there is anything new waking it but nothing shows up when I query it in cmd Also when I press the pwr button which is supposed to make it sleep nothing happens when on battery but when plugged in it sleeps.
View 2 Replies View RelatedLaptop Sony Vaio Model VPCCW1Z4E
OS Windows 7 Home Premium Service pack 1
Processor Intel Core DUO P7450.
Norton 360 V5.2.1.3, security software
Laptop starts up and can shuts down with out any problem.If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.All drivers have been update using driver dating utility by WinZip.Dump files & system health check report is attached.
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
View 2 Replies View RelatedMy new HP desktop is in hibernation mode and the monitor displays a message that says it can't come out of hibernation. What can I do?
View 3 Replies View RelatedMy laptop just wakes up from Sleep, while on battery. It's soooo annoying! I have this info from a CMD command. Maybe, it's relevant?
Info: Command I entered on Command Prompt: PowerCFG -LastWake .
Result:
Wake History Count - 1
Wake History [0]
Wake Source Count - 1
Wake Source [0]
[code]...
I haven't verified this yet, but I wondered if it's a possible bug?
I bought a Dell XPS M1330 over a year ago and it came preloaded with Vista Home Premium. Since I want to keep the batteries in good condition I run the laptop with no battery connected and AC plugged in whenever it sits on my desk at home.
However, in Windows 7 it seems that Windows wants to put the laptop to sleep after 10-15 minutes if I do this. Since I have various USB devices plugged in, especially external storage, this is a problem. It goes away if I run with the battery plugged in but like I said, not verified yet.
I'm having problems when my laptop goes to sleep, I'm not sure what happens but when my battery is low, it goes to sleep but doesn't wake up even if I plug the charger in. The only way I can get this fix is to restart it by shutting it down through the power button.
View 5 Replies View Related