Frequent BSOD After Windows Goes To Sleep/Hibernation
Apr 13, 2012
I've been getting frequent BSOD after Windows goes to Sleep. I'm getting BAD_SYSTEM_CONFIG_INFO, KERNEL_DATA_INPAGE_ERROR and CRITICAL_OPJECT_TERMINATION errors pretty regularly. I ran chkdsk on my C: drive and got a registry file failure. This is a fairly recent build (<8 months).
Specs:
OS: Windows 7 Home Premium 64bit retail
CPU: Intel Core i7-2600K CPU @ 3.40GHz
Motherboard: ASUS P8P67 Pro
Memory: PNY 4GB DDR3 PC3-10666; PNY 2x@GB DDR3 PC3-10666
Graphic Card: NVIDIA GeForce GTS 250
Monitor(s) Displays: Dell S199WFP; Generic PnP Monitor
Screen Resolution: 1440 x 900; 1280 x 1024
Hard Drives:
Seagate 1TB SATA (ST3100003 40AS SCSI)
Western Digital Caviar Green 2TB, 32 MB Cache (WDC WD20 EADS-00R6B0 SCSI)
I installed a clean windows 7 installation, Worked fine for a bit and now when I put it into sleep mode it BSOD coming out. In hibernation it requires me to hit the power button to come back and when it does it just comes up with a windows black screen with white lighting saying "windows could not recover the data to load windows" then i need to coose to loose the data and restart or try and load the data (which never works).I have the minidump file that I ran in debugger and and analyzed, which I am pasting here since idk how to upload it;
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [C:WindowsMinidump�51112-28735-01.dmp] Mini Kernel Dump File: Only registers and stack trace are available
I'm having a very annoying problem where my laptop will begin to enter sleep mode, but instead of powering down it keeps running for a few minutes and then crashes.When I start up my laptop again I get this
This happens very frequently. It happens on and off. I am running Windows 7 professional on Dell Inspiron E1505 and when my computer goes into hibernation ( it doesn't matter if it's on battery or plugged in), sometimes I can reload the computer physically. Sometimes or most times, it shows a black screen and I have to manually shut the PC up and then reload it losing everything which I had before going into hibernation.
I've got it to work flawlessly on my desktop, however on my laptop, a Dell D630, I can't seem to get it to work. I've created a task triggering on a specific time and running the operation '/c "exit"', which should just start a command prompt and close it again. I've set it to "run with highest privileges" and "wake the computer to run this task". However, it just doesn't boot as scheduled.
The history of the scheduler says nothing at the moment that the trigger is set to go off, but a minut later (probably when I manually boot) I get a "Task scheduler "{....}" instance of the task "Wakeup" due to a time trigger condition."
I am having a problem where my laptop doesn't got into sleep / hibernation mode when the battery is running low. It just shuts down suddenly causing the machine to give me an error about not been shut down property upon reboot.
I want to say 2 days ago, my computer has decided to fail when going to sleep. It is Windows 7, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors and external hard drive are never turned on as they once were and the machine just sits there running with a black screen. I restart, boot back into Windows and it says resume (as if it was in hibernation, but I have hybrid sleep on) and I just get a flashing underscore and no more. I restart once again, it says Windows could not restore the session, I start a new session and all is good again... until the computer falls asleep and the process starts over.
I have tried turning off hybrid sleep. No good. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once the upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recenly is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck.
so I have 10,000msecond(2.7hour) shortcut to shutdown my computer ("C:WindowsSystem32shutdown.exe -s -t 10000") which i use for watching films before bed, just encase i sleep half way through but I was wondering if there was a way to make a similar shortcut but instead of making your computer shutdown in a few hours make it sleep in a few hours time. Now I know how to make a sleep shortcut but that makes the computer sleep instantly, and putting "-t 10000" at the end of "C:WindowsSystem32 .exe powrprof.dll,SetSuspendState 0,1,0" doesnt work. Apparently their is a way to do it if you install some software but I don't want that.
I live in a place where we have power shortages from time to time. I have my Dell desktop pc attached to a UPS and i have configured the pc to go to sleep after 5 minutes when on UPS. Is there anyway to wake up the pc automatically once the power is on? I have connected my UPS with USB cable to the pc, and the pc treats the UPS as a battery. I use this pc as a media centre so this feature is something i really need.
The thread title about sums it up! When I try to wake my computer from sleep mode, my monitor gets no signal/is black. The "rest" of the computer seems to wake up just fine.
The monitor was working fine with Windows Server 2008, after sleep mode, but I just recently upgraded to windows 7.
I have already tried: displayswitch /extend displayswitch /internal in a .bat file
using "Hibernate Trigger", "Power Triggers" and Windows task sheduler.
Doesn't work at all for me (I've got Windows 7 Proffesional 32-bit Service Pack 1)
Whatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
I recently formatted, and since, my pc refuses to remain in Sleep/Hibernation mode. When I select the option in the start menu, my pc does its thing, once it enters sleep/hibernation, it instantly powers back up. I have changed nothing to my pc's hardware since the format, and this issue never occurred before hand.
Some of the things I have tried are making sure the power management setting were correct. I also hard reset my motherboards cmos to manufacturer settings.
I got a lot of BSOD on Windows 7 64 bits.I have updated the video cards drivers and all the others drivers windows update suggestI have run the Windows 7 mem test 2 times without any error.The weird thing is that the stop code change a lot.Here is the computer spec: HP Pavilion a6318f PC (GX769AA) specifications - HP Home & Home Office Products With a 8800 GT geforce 4 instead of the default card and 3 gigs instead of 2.For now, I'm thinking of trying another video card or doing a windows repair. But I would like if someone that know how to read dmp file could point me in the right direction.
I have an ASUS Zenbook UX21E, 128SSD, 4GB RAM, running Windows 7 Home Premium 64 bits.I'm having a problem with Windows crashing and rebooting after waking up from sleep or hibernation. It manages to show the welcome screen (whre you put your password) but after a few seconds it reboots.i'm attaching the Windows_NT6_BSOD_jcgriff2 folder & the PERFMON HTML files. My System Health Report file is in Spanish, I hope it is still usefull. Further information:
- Windows OEM versi, original installation. - I have uninstalled all ASUS utilities related to power management - The computer is from january 2011.
I never used it heavily at the start and assumed it was just a driver and that i'd figure it out later.Well; now is later and I can't figure it out.I've done a re-install of the OS (HP recovery)This system is about a year old and is an HP Pavilion dv6 laptop with AMD Phenom II N850 Triple Core @2.2 ghz 6 gig memory 64 bit Windows 7 Home Premium.
Laptop Sony Vaio Model VPCCW1Z4E OS Windows 7 Home Premium Service pack 1 Processor Intel Core DUO P7450. Norton 360 V5.2.1.3, security software
Laptop starts up and can shuts down with out any problem.If try to hibernation or standby, it take long time accessing disc then crashes. The problem only started when upgraded to service pack 1.All drivers have been update using driver dating utility by WinZip.Dump files & system health check report is attached.
Occasionally, when resume from hibernation/suspend, display brightness control doesn't work. Means that Fn + F2,F3 doesn't work, change from Windows Power Options doesn't work, change from intel graphic doesn't work. If I have to restart some services to get it working? It's occasional and I can't find anything exact in EventLog. My system is HP Probook 4230s with Core i5-2410 with intel HD3000. Latest patches on both Win 7 Pro 32-bit and intel driver. Restart machines solve the problem, re-hibernate or re-suspend machine occasionally solve the problem, but mostly not.
i have a self-built pc that i have been using for about 2 years. i have had problems with bsod in the past and recently reinstalled my operating system (windows 7 64 bit) about 2 weeks ago. in the past few days i have been getting nonstop bsod, about 5+ per day although not all are being shown in the dump files according to bluescreenview. usually i am not doing anything when these occur except browsing the internet or listening to music on Internet. sometimes i will have a game minimized in the background while i am doing work. i have had these problems before but have not been able to put my finger on what is causing them. i have attached requested files with my computer specs, so if there is any advice you can give me or any insight into what might be causing these, please let me know. it is difficult for me to understand on my own because most errors are different according to the bluescreenview reports.
i've been having this problem for a while, and earlier it only came up when playing BF3, but now it occurs all the time, even when in desktop. I've been monitoring temperatures and usage on my components, which seemed like the logical error from the start. It's usually the 0x0000003B, but i've also had 0x0000001E. Minidump attached, but the latest ones are not saved, but i usually get 0x0000003B win32k.exe error.
I have decided to upgrade to Win 7 due to frequent BSOD crashes on my old Vista 64. Unfortunately the upgrade did not help and im getting BSOD still pretty often.
I have been getting the BSOD or the screen freezes at every boot up of the computer. Haven't been doing much on my computer except gaming and work.Ran the memtest and it came out alright.
I am getting BSOSs more frequently that is making my pc unusable. I have attached the latest .dmp created. What is causing the BSODs. I have uploaded .dmp file to google docs. [URL].
I own an Asus Laptop that runs on Windows 7 and I've been getting random BSOD for months (around 6) and they've become more frequent. I've downloaded Malwarebytes Anti-Malware scanned my computer and thought the problem was fixed but then it would come back. It's happened 11 times this month and 3 times today alone.I really don't know what to do anymore. I've considered reinstalling windows but I don't have the disc.
I have been getting BSODs on occasion. When recently playing a beta of a MMORPG I recieved three within 20 minutes of playing the game. They are I believe, bad pool header errors.I am running a custom built older PC with Windows 7 Pro-64bitAMD Athlon 64 x2 4200+4GB RamASUS A8NNvidia GeForce 8600 GTSI ran a memory check and nothing showed and I believe my drivers are all up to date. In Device Manager I have two unknown devices on PCI standard ISA bridges and and a creative game port on PCI bus 4, device 8, function 1 showing errors.
The BSoD has happened a few times over the last few days. Every time it reboots just fine. I have noticed it tends to happen while downloading or while watching a show using VLC player. My background programs include McAfee Enterprise 8 and TeaTimer (Spybot S&D). I am suspicious of the McAfee because the day after I installed it was the first BSoD
After reboot from most recent crash I copied the details from the "Windows just recovered from an unexpected error" box. Problem signature: Problem Event Name:BlueScreen OS Version:6.1.7601.2.1.0.768.3 Locale ID:1033
[Code].....
I have also attached the zip of dump from the SF Diagnostic Tool.
The past few weeks she has been getting frequent BSODs, usually three or four a day: KERNEL_DATA_IMPAGE_ERROR.While I know enough to view this using BlueScreenView, I'd like to know how to interpret it
