Clean Windows 7 Install To Ssd: Avoiding 100mb Loss

Dec 24, 2011

finally getting around to my first win 7 install on my new 120 gb mushkin chronos deluxe.I am using tweakhounds win 7 install guide found here: TweakHound - Installing Windows 7 particullary, I am trying to avoid the 100 mb loss:

Quote: Code: *Avoiding the 200MB partition: Folks have discovered that on an unpartitioned drive Windows 7 will create a 200MB system partition. This is easily avoided by creating a partition before attempting to install Windows 7 (see above). (for some this partition will be 100MB)**Exception for SSD drives to avoid the 200MB partition and partition / format the drive.Partitioning is a little different for SSD (Solid State Drives). This is because of something called NTFS partition alignment. Basically this refers to where on the drive the partition starts. Vista and 7 will create a single partition optimally for SSD's. XP and most program boot disks will not. If possible you should partition the disk under an already installed Windows 7 or Windows Vista machine and then proceed with the usual installation steps. If not then this is the way to do it:

Windows 7 Installation Advanced Drive Formatting

1 - Boot up from the Windows 7 installation disc.

2 - Choose Repair your computer.

3 - In the System Recovery Options screen, choose Use recovery tools... and click Next.

4 - Open the Command Prompt.

5 - Type diskpart and hit Enter.

6 - Type list disk . Find the disk you wish to install Windows 7 on. If you only have one disk then it will show as disk 0. If you have multiple disks find the drive you wish to install 7 on.

7 - Type select disk 0 (or use the number of the disk you wish to install Windows 7 on)(note - that is a zero)

8 - Type list partition. There shouldn't be any.

9 - Type create partition primary.

10- Type select partition 1.

11- Type active.

12- Type format quick.

13- When finished reboot and begin your installation.

( DiskPart Command-Line Options ) After reboot, the ssd shows as having 100 mb used and is listed as a system drive.

View 4 Replies


ADVERTISEMENT

Windows 7: Clean Install On A 2-partition Drive - Data Loss?

Oct 26, 2011

I currently have a 500GB SATA drive with 2 partitions, C: has Vista Ultimate in it and most of my (Really Important) data is in D:- I do not have an external drive with enough space to back up both partitions, only C: -- If I install Windows 7 on C:, will I also lose all the data in D: (Partition 2)?I want to be 100% sure I won't end up with data loss on D: if I do a clean install on C:

View 11 Replies View Related

Windows 7 100MB Sector - Install It Without Having To Reload Entire O/S Again?

Feb 6, 2013

So I finally got around to checking one of my set ups and I discovered that it does not have the Windows 7 100MB section on the SSD. I double checked with Macrium and sure enough, there is no 100MB section on the SSD.

Is there a way to install it without having to reload the entire O/S again?

View 9 Replies View Related

Power Loss To Notebook Shows Loss Of Windows Activation?

Jan 15, 2013

I had a power loss while running on battery (it still showed power left, but suddenly shut down anyway) and when I restart, it reports that the Windows is not activated and Window is not genuine and system might be a victim of "counterfeiting."

Is this a virus (I have MSE on continuously and about once a week scan with Malwarebytes)? I have run 'sfc /scannow' with filtered output ('findstr /c: "[SR]" c:.....logsCBSCBS.log" and it appears as usual.

How can I lose my Windows activation?

View 4 Replies View Related

Avoiding Viruses And Malware?

Dec 7, 2011

I am new to Windows 7 and have just come across the Vrtualization featuers. They seem interesting but I am not 100% sure of how they work.There are certain apps out there in my industry that people suspect might not be "clean" but they are very good at what they do. So I want to be protected from them. I used to use, Sandboxie with my Win XP setup.If I install or run a virus/maleware infected application, can I do so in a Virtualized way so that it doesn't infect the rest of my system?

View 2 Replies View Related

How To Install Windows 7 On Portable TBHD Without Data Loss

Jul 5, 2012

My desktop pc crashed, and after some investigation it turns out that the main hard drive is probably dead... So I thought I would install Windows 7 onto my portable terabyte. Anyway when I tried to install Windows 7 onto my hard drive, I realised 2 things:

- Windows will clear my TB HD when it installs.
and
- Windows cannot install onto a USB device.

I need to install windows 7 on my portable hard drive without removing any data on it. I have tried to partition my hard drive with easyus as a friend recomended, but it says I need to convert it to a logical, and I cant do that because it says something about clearing the HD.

View 9 Replies View Related

Cannot Install 0x80070714 When Try To Install Windows 7 Into Clean Disk / Installation Just Stops

Feb 13, 2013

I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..

View 3 Replies View Related

IDT Audio Drivers Won't Install - Windows 7x64, Clean Install?

Jan 30, 2012

I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.

Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install

View 5 Replies View Related

Performance Difference Between Windows 7 Clean Install And Upgrade Install

Feb 3, 2010

Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.

View 3 Replies View Related

Is Clean Install Still A Way To Install Windows 7 With Upgrade Disc On A New Hdd

Jun 29, 2010

I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?

View 9 Replies View Related

Unable To Install Windows 7 - Clean Install

Jan 31, 2010

I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:

Intel Core 2 Duo 3.12 Ghz
nVidia GeForce 9800 GTX 512 MB PCI-e
320 GB Western Digital HD SATA
1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM

I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.

edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.

View 9 Replies View Related

How To Eliminate The 100MB Windows 7 Reserved Space

Mar 26, 2012

How do I eliminate the 100mb partition when doing a clean install? I will be doing this soon and would like to eliminate this.

View 4 Replies View Related

How To Remove 100mb Partition Windows 7 Creates

Sep 20, 2012

I want to remove the 100mb partition W7 created when i installed it the first time (my hd is 3tb and i need to get rid of it because it uses a primary partition slot i need it for something else).Say I use a tool like paragon disk manager or acronis disk director... delete and remove that 100 mb partition... and then use the W7 recovery bootable cd..

View 4 Replies View Related

How To Create 100mb System Reserved Partition During Installation Of Windows 7

Jul 14, 2012

previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.

View 3 Replies View Related

Clean Install Of XP Over Windows 7?

Apr 6, 2012

i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.

I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?

View 14 Replies View Related

Can't Do Clean Install Windows 7

Jun 18, 2012

I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?

View 2 Replies View Related

Clean Install Windows 7?

Aug 10, 2009

i wanna Format my C:/ drive and Clean install Windows 7 beta..

im inserted W7 DVD and restarted my computer.. bt doesn't Boot From Windows 7 DVD .My first boot Devise is DVD rom.second Boot Devise is HDD...

View 9 Replies View Related

Clean Install Of Windows 7 Pro Going As Bad As Possible

Feb 26, 2010

I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.

So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.

View 4 Replies View Related

Clean Install Of Windows 7

Apr 11, 2011

I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.

View 3 Replies View Related

Clean Install Windows 7 Pro On New SSD

Apr 5, 2012

I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?

View 5 Replies View Related

Clean Re-install Of Windows 7 X64?

Aug 10, 2010

I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.

View 3 Replies View Related

Clean Install Of Windows 7

Sep 21, 2010

I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.

View 9 Replies View Related

Windows 7 32 To 64 Bit Clean Install?

Nov 7, 2010

if I am already running Windows 7 32 bit on a 2Core, can I suubsequently do a clean install of Windows 7 64 bit?

what are the main advantages of 64 over 32 bit?

View 9 Replies View Related

Windows 7 Clean Re-install From COA Key?

Aug 1, 2011

I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft

View 7 Replies View Related

What To Do After A Clean Install Of Windows 7

Mar 30, 2012

I just did a clean install of Win 7. I have the intel network driver so I'm online but that's it. I have no drivers or programmes at all. What to do next.Yes I forgot to do a backup. It did create an oldwindows folder.I have genuinely activated my Win HP.I have a HP Dv7t 64-bit.

View 6 Replies View Related

Can't Do Clean Install Of Windows 7 On New HDD

Sep 29, 2012

i have tried to install windows 7 on a brand new HD and it comes up with:"windows setup could not configure windows to run on this computers hardware" i have tried 3 times and still get the same error message. i have put the HD into another machine and installed windows 7 successfully so it can't be the new HD- the recovery disks appear to have no surface damage.i have previously installed windows 7 on new HD's on this machine before using the same recovery disks with success-what has gone wrong this time? is my computer damaged somehow? before i put in the new HD my computer was infected with a virus but this could only damage the old HD?

View 9 Replies View Related

Clean Install Of Windows 7

Apr 27, 2012

If I do a clean install of windows with preformace in mind what secuirty would you include? Just windows firewall with microsoft essentials? Would that be enough? Its a labtop on wifi (home) but I may be taking it other places at some point. I feel like avast is a great anti virus but I dunno if its possible to just run it once in awhile? Its always loaded. It seems bog system down. im also having other issues from random restarts and such freeze. Anyway what would be enough? Just make sure I don't run into the same problems (of like conflicting programs) messing up windows. Malware (installed) Microsoft essentials running all time and windows firewall is this enough? Or would it be better to just install one all in one program like.

View 6 Replies View Related

Clean Install Windows 7

Jan 11, 2009

How to Do a Clean Installation with Windows 7 ?

View 0 Replies View Related

Windows 7 Clean Install

Sep 23, 2011

I have a brand new computer that i just put together and i have windows 7 on a 16 gb flash drive. I made it bootable through the program winflash and when i put it into the computer nothing happens. So i guess the question is what do i have to do to perform a clean install of windows off of my bootable flash drive.

View 2 Replies View Related

Can Clean Install Windows 7 OEM

Sep 23, 2011

I want to clean install windows 7, I have the oem version. Am I allowed to do that with the oem version?

View 7 Replies View Related

Clean Install Windows 7 - No CD

Mar 1, 2012

My mom's laptop HDD has been through a lot of installs/uninstalls etc.. Is there any way to do a "clean install" without the install CD? Unfortunately when she first got it it was bloated with all sorts of Toshiba stuff and the CD also wasn't included. I was going to hook it up to my computer and format it but I don't have an install CD.. Not sure what to do!

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved