i have been trying to install a RAID array on my system, and due to some complications ended up having to reinstall windoiws from the master CD, now i noticve it has created a drive called "system reserved" - the volume is only 99.8 MB - when i open the drive it contains nothing at all? what is it / how do i get rid of it?
View 6 RepliesI installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies View RelatedI've taken a 1TB SATA HDD from a second computer which had Windows 7 OS on it. I have housed it in an external caddy to use as a backup drive for my primary computer. It comes up as two paritions G and H. I've formatted G to give me a 931Gb drive and I have a H drive with 99.9MB which is the System Reserved from the previous Windows 7 install.Can I format the System Reserved partition on the external drive and combine the two partitions to create one external backup HDD?? If I need software tools to do this are there any freeware tools that would do this?
View 4 Replies View RelatedI have bought a new hard drive to use as my main one, and am planning to use my current, larger one as backup, as i found i was not filling it. So i need to completely duplicate my current drive, a 1tb one, with 180gb of stuff, to my new 320gb drive. i have made a full disc image with driveimage xml, which comes to 180gb, but when i try to restore it to the 320gb one, it says it it too big. How do i gp about setting this up? do i need to copy the system reserved partition to the new drive too for windows 7 to work, or can it not be copied? should i install windows 7 to the new drive from my install disc? if so, how to i get my settings, programs and data back without too mcuh hassle?
View 2 Replies View RelatedI have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 Replies View RelatedRight now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
View 2 Replies View RelatedFor some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
View 8 Replies View RelatedI accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
View 8 Replies View RelatedI've two HDD connected to my system , a 1TB & an 160 GB . But now i want to remove the 160 GB HDD . But i noticed a weird problem when i opened disk management . Here is a screenshot :
As you can see my OS ( Win 7 ) is installed on C: drive which is on Disk 1 . While its System reserved partition is on Disk 0 . Now since I have to remove Disk 0 , The System reserved partition has to be moved to Disk 1 . I don't wanna reinstall the OS , so how can i shift the System reserved partition (With all its contents ) from Disk 0 to Disk 1 .?? :-?
When originally installing Windows 7 Ultimate I noticed it created a 100mb system reserved partition. No probs.
Recently I turned on AHCI in my bios and attempted to do a clean install. This time WinPE did not create a reserved partition and despite creating an 80gb partition to install windows on it said “Setup was unable to create a new system partition or locate an existing system partition.”
Install refused to proceed any further, pointing me to some log files I could not find. I booted from my repair disk and tried to make the partition active, which was already marked as active and tried again. No luck.
I had deleted all partitions on the drive.
So I turned off AHCI and tried again. I missed the "press any key".. and system complained about a "Master boot record error".. I rebooted and tried to do install again. Same issue.
I was able to recover my system from an image I created earlier, but I sure would like to know why the reserved partition was not created, and why windows refused to install. Because I'm going to try again.
I have purchased a new HDD, one that is supposed to be much faster than my old one, which of course has not been formatted. I tried that drive with and without AHCI and had the sasme issues.
How to Delete the Windows 7 100MB System Reserved Partition ?
View 0 Replies View RelatedI am gonna do a format reinstall of Windows 7 and I noticed this partition which I believe was created when I first installed Windows 7. Should I just leave it there or can i delete this partition when I format reinstall Windows?
View 1 Replies View RelatedI've added another HDD to my system. On my older HDD which is 1 TB, 3Gb/s,w/6b of cashe. I have two partitions on it called System Reserved (100 Mb) and Back Up Disk (250 Gb). The newer HDD is 1 TB, 6Gb/s w/32Mb of cashe.My PC will handle the 6 Gb/s transfer rate.Should I put these partitions on the newer faster drive?Can I and/or should I combine these partitions?If I can combine them what size should I make a new Partition @150GB?s above will also relate to the moving the BackUp files too?I've estimated what i think the size of the partitions above should be, should I change them? Down the road I'd like to multl boot with Linux and XP Pro I'm using Windows 7 64b Ultimate it's on a SSD all by itself?
View 7 Replies View RelatedI have a bit of a problem. I recently got a new SSD and configured it to make it my boot drive. I kept my old installation on my hdd and also made a new partition on that device to hold all of the program files, data, etc. Whenever I was finished installing all the programs that I had on my old setup on my new setup and had transfered all necessary documents, I figured it was time to remove the old partition and expand the new data partition to fill the drive. I used gparted to delete the old one and expand the new one.
For some reason, whenever I installed windows 7 on my ssd, it never created a system reserved partition. Everything booted up fine. After deleting my old partition, my system now fails to boot up and gives me the message "BootMGR is missing. Press CTRL+ALT+DEL to restart". Clearly, my computer is now wanting a system reserved partition.
My question is, how do I create a system reserved partition AFTER Windows 7 has been installed?
I have already tried startup repair and all of the bootrec.exe commands, but none of them seem to work.
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition?
- And during the reinstall could I do so that this partition is not created anymore?
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
View 5 Replies View Relatedpreviously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
View 3 Replies View RelatedI recently built my first computer and all was going well until i went to install Windows 7. I get to the custom install and i only have one hard drive but that hard drive to install it on is OEM reserved and when i try to format it i get an error message i believe 0x8007005 something (forgot the number after 5 but it is either a 8 or a 6 or 2 sorry). I do not have a disc to install the drivers which the guy from microsoft said i should have but i do have a motherboard driver disc. I don't know what delete does and have not tried it.
View 2 Replies View Relatedguys i had a little bit problem with this 100mb System Reserved drive.it appeared on my Hard Disk Drives on my computer as Local Disk.
View 2 Replies View RelatedI installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes]. I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies View RelatedI've had W7 on two computers that I built: My old one and my new one On the old comuter, W7 installed itself, boot loader and all, on a single partition. However, on my new build, W7 created a 100 mb "system reserved" partition leaving 111 G for data on one of my SSD's which I decided to use for other purposes ( W7 is installed on a second SSD which is partitioned as mentioned). Then, Using "disk management", I deleted the 100 mb partition on the SSD that I wish to use for other purposes, then tried to expand the 111 GB. I got some kind of useless message that said "object does not support this operation". So, the 100 mb "System Reserved" partition is not shown in "disk management" and is not available, nor can I restore it to use.
View 4 Replies View RelatedI already have windows 7 Ulitmate x86 but 1 day I came up with an idea of giving a try on x64 one by dual booting.. So I downloaded it legally from microsoft and I did every procedures required for the install. Shrunk my C drive and installed the OS on the unallocated free space on the drive and it went on perfectly. But the problem is the System Reserved partition showed up on the x86 OS. every time i open My Computer i can see the system reserved partition.
I could accidentally do something wrong with the partition if it remains unhidden so I want to hide it. I was thinking of changing the drive letter but I afraid that's going to give me boot problem. In disk management the System Reserved is labelled Z and marked as active. I tried to set my other partition as active that day but the pc cannot boot at all not even the boot manager showed up. However I managed to fix it using my recovery disc to access the cmd and reactivate the Z drive using diskpart.
There is a unknown 'portable' device (F:/) on my computer which I dont recognize. I saw it when I was about to scan my computer with Norton and was about to select which drive I wanted to scan, if I show hidden files it also shows up under My Computer, but I cant access it.... What could cause this?
View 4 Replies View RelatedI have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.The only USB devices that work are the keyboard and mouse.I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
View 5 Replies View RelatedWhen I was booting one day last week I got a nasty BSOD when Windows was trying to load. Then on the next reboot Windows 7 said it couldn't load and needed to do the recovery OS option from the Windows 7 repair on the CD. Well, before trying that I did a cold reboot and it got back into the OS fine so I didn't think much of it. Now, I noticed Ghost shows the C: drive status as "Unavailable" and it can't back it up anymore. It does give me an option to restore from one of my old backups. I'm thinking the MBR got hosed up somehow or something like that. But I'm skeptical to run an MBR repair since I have that 100MB partition on my SSD where my OS resides.
Ghost Shot> This was about a week ago my Windows 7 started acting up right before the big patch Tuesday. I've been running it for over a year now and it's been solid. When I first set it up I installed it on my SSD (Intel 510 120GB) drive. One of the qualms I had with the install is Windows created a separate boot sector on the disk drive where it stored my boot files. This is known the the "system reserved" operating system files 100MB partition. Apparently the way to avoid this is to use a third party partition tool before doing the windows install. That way it will keep the Boot sector files on the same partition which is how I would of liked it for doing restores from Ghost 15,etc. Anyway, ghost was backing up my system C: drive before last week. I have yet to even try and use Ghost to see if it would successfully restore my OS but I've been using it to backup my C: drive anyways. Prior to last week it could backup my C: drive fine. I might try a Ghost restore point from a few weeks back before this happened but not sure yet[CODE]
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View Relatedi recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedSomeone spilled a liquid on my wife's laptop damaging the keyboard and internals. It cannot boot but I need to get the files from the HD. I bought one of those USB to laptop HD cables, removed the HD and hooked the cable to my desktop Windows 7 PC. The drive came up as "System Reserved" with only the boot sector folders visible. I hooked it to an XP PC and autoplay showed all the folders but I couldn't see them in "Computer." I tried backing everything up to a DVD but it failed for some reason. This somehow may have damaged the drive.The drive now appears and disappears in device manager. When it's listed, it shows as working properly but no longer shows up in Computer or Disk Management. Any chance of getting files off of the laptop HD?
View 1 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI need contents of Lenovo_part oem reserved partition of lenovo ideapad z570 notebook? this partition is factory build and hidden. I have accidentally deleted that without having backup.
View 1 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.