Unknown Hard Drive Shows Up (F) But Cannot Access It
Feb 3, 2012
There is a unknown 'portable' device (F:/) on my computer which I dont recognize. I saw it when I was about to scan my computer with Norton and was about to select which drive I wanted to scan, if I show hidden files it also shows up under My Computer, but I cant access it.... What could cause this?
View 4 Replies
ADVERTISEMENT
Oct 18, 2012
When I was booting one day last week I got a nasty BSOD when Windows was trying to load. Then on the next reboot Windows 7 said it couldn't load and needed to do the recovery OS option from the Windows 7 repair on the CD. Well, before trying that I did a cold reboot and it got back into the OS fine so I didn't think much of it. Now, I noticed Ghost shows the C: drive status as "Unavailable" and it can't back it up anymore. It does give me an option to restore from one of my old backups. I'm thinking the MBR got hosed up somehow or something like that. But I'm skeptical to run an MBR repair since I have that 100MB partition on my SSD where my OS resides.
Ghost Shot> This was about a week ago my Windows 7 started acting up right before the big patch Tuesday. I've been running it for over a year now and it's been solid. When I first set it up I installed it on my SSD (Intel 510 120GB) drive. One of the qualms I had with the install is Windows created a separate boot sector on the disk drive where it stored my boot files. This is known the the "system reserved" operating system files 100MB partition. Apparently the way to avoid this is to use a third party partition tool before doing the windows install. That way it will keep the Boot sector files on the same partition which is how I would of liked it for doing restores from Ghost 15,etc. Anyway, ghost was backing up my system C: drive before last week. I have yet to even try and use Ghost to see if it would successfully restore my OS but I've been using it to backup my C: drive anyways. Prior to last week it could backup my C: drive fine. I might try a Ghost restore point from a few weeks back before this happened but not sure yet[CODE]
View 5 Replies
View Related
Dec 1, 2009
when i insert any usb drive like pen drive of 2/4 gb wiindows shows access denied but in other pc that drive is fully ok, i can not use any pendrive in my pc now,
View 7 Replies
View Related
Apr 8, 2011
I have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 Replies
View Related
Sep 8, 2012
I have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.The only USB devices that work are the keyboard and mouse.I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
View 5 Replies
View Related
Dec 11, 2011
i have an ACER laptop. a few weeks ago, i installed oracle 11g software twice and uninstalled it. it was after the 2nd uninstallation that i noticed, C: drive access is denied.the c: drive is now under NTFS. i tried system restore but there was no use. i tried making changes to admin and security through another user, but the fault still continued.i am able to switch on and shut down the system, surf the web. but i am unable to do basic operations like copy, cut, paste, move,download files etc.i have several important documents which i would not like to lose.
View 2 Replies
View Related
Sep 8, 2009
Because windows gave me the blue screen of death yesterday, I had to reinstall, now it won't show my second laptop HD. During the install, I partitioned both drives, and it detected them, now it only shows my 1 HD with the windows directory in it. How do I solve this issue?
View 9 Replies
View Related
May 28, 2011
I am a salesman in a tech department of an office supply store, and I had a customer issue stump me today. She had an external drive with lots of files on it she wanted to access. I took the drive, plugged it into a Windows 7 machine (HP quad), and all of the files appeared, no problem. But, then I plugged the seagate drive into her new Toshiba laptop (also Win 7), and only some of the files appeared. Missing were all photo files, and many other types. I could not figure out why some were missing and some showing. I took the drive to a third computer with Win 7, an MSI all-in-one, and behold: files were missing. Now it seemed almost arbitrary. Could it be a matter of some Windows updates not yet installed? Why would the exact same drive work differently on three different computers in regard which files were seen and accessible? None were "hidden" files.
View 3 Replies
View Related
Oct 3, 2009
I have Win 7 Enterprise installed.
When I click into my IE8 Favorites, my HD folders are appearing there. I did some tests and if I try to delete them, my original HD files are deleted.
Maybe it happened when I tried do bring back my favorites from my backup files (ex Win XP), and I think that IE8 added all folders of my c: hard drive instead of only my favorites bookmarks.
Now, I can't even add new bookmarks.
Please my friends, is there anyway to fix that?
View 9 Replies
View Related
Dec 7, 2011
I have a Western Digital 1TB Hard Drive (External).I use it 99.9% of the time on my Windows 7 64bit computer to store pictures/videos and backup important files.It was working fine until I plugged it into a MACINTRASH to backup files from that computer.It was a simple copy and paste from the MACINTRASH to the External HDD.After copying the files from the MACINTRASH, I plugged it back into my PC.My PC no longer recognizes my external HDD. I unplugged the power, plugged it back in.Same with the USB cable. Rebooted. Then my computer wouldn't reboot and windows did its automatic self repair. Nothing.I unplugged EVERYTHING and left it that way for about 30 minutes. I plugged EVERYTHING back to my computer and turned it on.
Windows booted up fine. I plugged in the external HDD and windows had that little icon telling me it was installing drivers. I was excited to think that it finally would recognize my external HDD.Of course, it didn't work. The HDD does not show up in my computer. It does show up in Device Manager and Disk ManagementDevice MangerUnder Disk Drives it lists it only as "WD" My other drives it has a nice long name like "WD 7500AAK External USB Device" Under properties it tells me Volume information for the disk cannot be found. (The very first time I did that prior to the reboot it said there was 0MB of space on it). It claims the device is working properly Disk ManagementAt first this said that I must initialize my disk. Now it doesn't even show up anymore. I have no idea what to do anymore.
View 9 Replies
View Related
Dec 15, 2011
I've spent most of the night searching and cannot seem to find an answer to my problem.I have a NAS set up with two 2TB Samsung Spinpoint hard drives. The hard drives in the NAS were partitioned to have 300GB in a RAID 1 and the remainder in a RAID 0. One seemed to be failing so I removed it hoping I could connect it externally to my laptop and recover the data. When I hooked it up to the laptop, it seemed to connect fine but did not show in My Computer. When I went to Computer Management - Disk Management, it shows the partitions as healthy (see image - Disk 1). However, when I right click on the partitions to assign a drive letter, the only options available are Delete Volume and Help. Same when right clicking the Disk 1, all that is available is Convert to Dynamic Disk, Properties,
View 9 Replies
View Related
Aug 17, 2011
my hard drive D shows full wehn i have only 2.5gp used but the rest are all fre but then it shows that the drive is full.
View 1 Replies
View Related
Sep 11, 2012
in windows 7 it indicates the hard disk is full while there is no any doubtful data or other data in pc. hdd capacity is 250gb. which dosent contain any bulky data?.But why it shows harddisk is full
View 2 Replies
View Related
Sep 15, 2011
My portable hard drive is showing all the hidden files and folders on it (the ones prefixed with ".", but not the System Information folder, interestingly). I don't have this trouble with any other drives, or elsewhere on my computer, so it seems somehow to be associated with this specific drive.Of course I check to make sure that "Show hidden files and folders" is turned off.
View 5 Replies
View Related
Jan 26, 2012
I got a problem, my external hard drive (westen digital 1.0TB) isn't popping up my computer. I can see it in devices (USB to ATA/ATAPI bridge) but i can't acces it.What i've done already:Computer Management-> Disk Management. Than ive to initialize the disk, i can choose between MBR and GPT. In both cases i got the error: Data error (cyclic redundancy check). I can't chance any letter Downloaded different programs but non of them worked
View 2 Replies
View Related
Sep 17, 2012
i tried to used pc disk clone x to clone my win7 to a smaller hard drive.now for some reason My Computer shows as 381 gig size instead of 682 gighere is a pic tried to make the partition a couple megs smaller to make it realize the actual size and its not working.
View 2 Replies
View Related
Mar 23, 2012
I have a 500gb seagate external hard drive, and already used 240gb space. It worked fine until yesterday suddenly i could not access the files at all. I checked disk management, and it showed that my external drive became RAW drive. I tried to do chkdsk that I learned from one of the forum, and then it somehow has fixed the RAW drive back to FAT32. However I still cannot see any of my files. I opened command prompt, and typed in dir /a and it said 0 files 0 bytes, 4 DIR 288,714, 293, 248 bytes free. How can I bring my files back?? I don't want to lose my files.
View 4 Replies
View Related
Dec 16, 2009
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
View 9 Replies
View Related
Jul 2, 2012
Installed new hard drive and Windows 7, wireless card shows up as unknown device.I was having major stability issues with windows. I wanted a new hard drive so i installed it and a new copy of windows. The wireless worked fine before, and ethernet works fine now. It shows up in device manager as other devices, network controller with a yellow exclamation mark. I have gone to Dell to install the driver. It almost finishes then says you do not have a recognized wireless device.
My comp is a Dell Inspiron M5010, I installed windows 7 HP 64 bit same as what was on before. WHDPC, K5Y6D are the numbers I have found for the card. I have tried several different drivers and all have the same error.
how to get windows to recognize the card so the drivers I install will recognize it? There are many threads about this in various places, but none of the solutions work.
View 4 Replies
View Related
Jun 16, 2011
i have been trying to install a RAID array on my system, and due to some complications ended up having to reinstall windoiws from the master CD, now i noticve it has created a drive called "system reserved" - the volume is only 99.8 MB - when i open the drive it contains nothing at all? what is it / how do i get rid of it?
View 6 Replies
View Related
Jun 25, 2011
I was wondering if it was possible to access a different hard drive on a computer via the network option on windows? All the computers on my home network are windows 7 and i'm always accessing stuff from a desktop file on my main computer to my laptop or onto my flat mates laptop/computer. I'm upgrading to a solid state pretty soon and hoping to put windows on my SSD and have all my files i'm usually sharing on my 2nd hard drive due to not having much space on my SSD. Is there any way to access a hard drive on your network that doesnt have windows 7 on? So I can access my files on my second HDD on my PC from my laptop. Normally all I can see is "Jon-PC" and that accesses the C: windows drive
View 1 Replies
View Related
Sep 14, 2009
So I had windows XP installed and decided to upgrade to 7.
I moved all of my files onto HD2 which is just a 1TB storage device, formatted HD1 and installed 7.
Problem is, I can't access HD2 to get all of my files.
I can see it in the BIOS, as well as on the Device Manager but it doesn't show up in Disk Management to assign it a drive letter.
It is enabled in Device Manager, I tried updating the driver and uninstalling/reinstalling and nothing has worked so far.
I need to get the data off this so formatting isn't an option.
View 14 Replies
View Related
Jul 27, 2012
I just did a new build and i put my 2 storage drives from my old PC in it and installed windows on a new crucial M4 ssd.When i try to open the storage drives under my computer i sometimes get a green progress bar that takes a bit to load. I tried turning indexing off, setting folder type to general n so on and the problem still occurs. I also noticed with winamp that when i click on it and scroll down and it has to load the duration of the songs winamp becomes unresponsive for a few seconds. I use PS3 Media Server to watch my video files on my TV and it also is laggy compared to before. It takes a good 10 seconds to load the list of files and takes a while to load a file when before it was instant.
View 4 Replies
View Related
May 15, 2011
Linksys/T-Mobile Hot Spot (wireless) ROUTER with Ethernet connections to
1) Home Phone,
2) iMAC PowerPC/OS X Leopard,
3) PC/Windows 7 32bit and
4) IOMEGA HOME MEDIA NETWORK HARD DRIVE (herein "NHD").
PERTINENT SYSTEM STATUS:The NHD contains 1) a "BACKUPS" folder with sub-folders containing scheduled & unscheduled backups and system images from both computers and 2) specific folders e.g. MOVIES.Upon attempting to open the "BACKUPS" folder on the NHD from the PC, a WINDOWS SECURITY panel opens 1) requesting a user name and NETWORK password to the NHD, 2) listing the PC name as a DOMAIN name and 3) a red "X" - Access Denied.
1) As User/Administrator, I have not set any "folder" security/passwords,
2) I can open, view, edit and delete any of the other folders on the NHD from the PC and can open, view, edit and delete ALL folders from the iMAC , 3) I have NO domain setup, only a WORK GROUP name, 4) Network access protection is OFF.
View 1 Replies
View Related
Nov 12, 2011
after plugging in the external hard drive after a while I get you need to format the disk in F:\ do you want to format?After a while throws another warning saying F: is not accessible, Data error (cyclic redundancy check)It was working well until last week but then suddenly started giving this error message.
View 1 Replies
View Related
Dec 1, 2011
So, I recently picked up this external hard drive from a friend, who was having some issues with it. From his first description I thought I would be able to solve it myself, but i1-The Hard drive, is a standard external one connected to the PC via a standard USB cable ( One regular USB connector on the PC side and a small one, I believe they are refered to as 'mini-USB Type B' on the drive's side).2-When connected to the PC it shows up like an internal hard drive, strangely, not with the external devices.3-It cannot be browsed or accessed in any other way, the windows explorer will either, load -extremely- slowly, without success, OR freeze OR simply say it cannot be accessed.4-The furthest I got in terms of interacting with it, was to uninstall and reinstall it via disk manager.
5-All other attempts fail, formatting is impossible as a right click leads to the problems described in point 3. (I tried to format after uninstalling/installing the drive, since a message came up telling me to do so, eventhough I was planning to do it anyway)6-The drive brand is completely unknown to me, it was purchased in Hong Kong and bears the label 'Buffalo'.
View 2 Replies
View Related
May 24, 2009
for some reason I am getting Access is denied when trying to access the hard drive (c.
View 7 Replies
View Related
Mar 30, 2012
I cant access my hard disk drive, when im trying to open it, my laptop responses that that there is no permission from administrator, there is a logo on my hard disk drive that the hard disk is shared..
View 2 Replies
View Related
Aug 11, 2012
I can see a generic storage device listed under the universal serial bus controllers in the device manager and am able to see the 'safely remove hardware' icon in my tray. Unfortunately, the only thing that I see in disk management is an 'unknown' disk. The hard drive is listed by manufacturer in the device manager; however, I am not able to open it from this site. And, when I look at the items 'attached' to my computer, the drive is not visible.
View 4 Replies
View Related
Oct 25, 2012
I have recently had to ditch my old computer windows xp, and bought a new Dell running windows Hoem repmium 7 (64 bit). I had a 32 bit ide external hard drive and had backed up my files there. Having got the enw copmpouetr set up I am trying to access my archived files on the 32 bit to transfer to new hard disk, but am unable to do so. Windows explorer locks up.
View 3 Replies
View Related
May 2, 2011
I have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
View 2 Replies
View Related