I have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 RepliesI am having issues with my external hard drive. It has been working just fine until today. The drive is showing up and I can access a few folders and fewer files, but the majority of the contents are nowhere to be found. It works without a hitch on every other computer in the house but the main one. Running chkdsk says the drive has a RAW file system and chkdsk can't run. This pc is running Windows 7 32-bit (all the others have Windows 7 64-bit) but no idea why I'm having this issue. Yesterday I installed a new printer, did some windows updates, and had a power outage, so I suspect the problem lies with one of those things. I'm really at a loss here as what to do though.
View 5 Replies View RelatedI have a LaCie external hard drive which works fine on other pc's running Windows 7 Ultimate, but on this one it is an "unknown device". I have tried it in different ports but with the same result. I've checked with Windows Compatability and the exact model is listed there as being compatible. I've been to the manufacturer's website but there are no drivers available.I have the same problem with any USB device I plug into any port. I have tried a complete Windows re-install from a different CD but it made no difference.The only USB devices that work are the keyboard and mouse.I have given the LaCie HD as an example because I am hoping that if I can get a specific device to work, I may be able to solve the problem with others.
View 5 Replies View Relatedi have been trying to install a RAID array on my system, and due to some complications ended up having to reinstall windoiws from the master CD, now i noticve it has created a drive called "system reserved" - the volume is only 99.8 MB - when i open the drive it contains nothing at all? what is it / how do i get rid of it?
View 6 Replies View Relatedand i got problem with my brothers WD external hard drive, it's not recognized in my computer, my brother says "it lost the drive letter or may be some files broken" he had some knowledge about that but we can't fix that one.
View 9 Replies View RelatedI have a hard drive I recovered from my old Dell laptop when the motherboard gave out. Originally, I just put it in an external hard case and have been using it as external storage. Now it is getting filled up, so I would like to reformat it to remove the OS partition (Vista) to give me access to the entire drive. I have removed and baked up all my files, but cannot find a way to repartition the drive to remove the OS volume. Disk manager will not let me access that volume to delete it - nor will diskpart. In fact, only the non-OS volume even shows up with a drive letter in diskpart.
I have searched the web but have only been able to find info on how to reformat the main hard drive...and this is definitely NOT what I want to do.
I made a few months back a backup of my machine(windows 7 64bit edition). The size was like 25gb's so I saved it on my external hard-drive(I bought a case and put a hard drive(Seagate I think) in it). I know want to use this to restore my computer. So I made a system repair disk and loaded it up. However it cannot find my external hard-drive. I have "WindowsImageBackup " in my root directory of my external drive. Yet it still does not see it. I would install some drivers but I have no clue what drives I need as when I plug it into my computer and I am in windows 7 it finds my drive. What do I need to make window 7 recognize my image?
View 9 Replies View RelatedI have a 3 Tera HDD. (WD My Book Essential (USB 3.0)). Last night I uninstalled a software which I do not remember its name by mistake. Apparently it was related to my WD hard drive for my computer does not recognize it anymore. I checked my device manager; "Base System Device" is not recognized. I ran windows troubleshooting. It says "Base System Device" Driver is not found. I searched a lot, but I couldn't find the driver. I also ran drive checker software.
It says:
Device name: JMB38X SD/MMC Host Controller
File name: MSI_GX633_Card For Windows 7.zip
Hardware ID: PCIVEN_197B&DEV_2382
I could not find this too. I also have another portable WD which is still recognized by my computer.
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies View RelatedSo, i woke up the other day to see my Windows 7 computer is now completely screwed up that i am on right now..C drive is Mirror RAIDed to let you know.It is reporting 74.1MB free of 465GB total on the drive.No matter what i delete, it does NOT EVER free up space.As a matter of fact, some files delete, then come right back, files i've added myself.. weird #1Two, i run chkdsk in windows, it says C drive is a RAW drive and cant scan however it boots up fine to it every time. weird #2So i then use windows repair command prompt to chkdsk /F /R It sees it's NTFS JUST FINE..but reports ZERO errors.. weird #3I scan using Intel Matrix Storage Console in windows, NO ERRORS, weird #4But i am getting Disk I/O errors like crazy in windows logs and in programs, etc.. weird #5I selected all files on Disk C- total space in use under 300gb, but showing 465GB in use.. weird #6Scanned for infections with AVG, no errors, i tried malwarebytes, will not open- 0xc000005. weird #7So i have a drive that can't be read but is read but reporting wrong size but measures right size that has no errors but has errors.
View 5 Replies View RelatedSo I bought a used 2 TB Hard drive and it supposedly was only used a couple of times and I got a good deal.I plugged it in and the software was installed successfully but it doesn't show up in the explorer with a drive letter. Now when I go to the device manager it does show up but I am not able to format it or give it a letter etc. Also like I said in the title it doesn't have a fat32 or NTFS File System.The hard drive I right clicked is the one I am talking about.
View 4 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedThere is a unknown 'portable' device (F:/) on my computer which I dont recognize. I saw it when I was about to scan my computer with Norton and was about to select which drive I wanted to scan, if I show hidden files it also shows up under My Computer, but I cant access it.... What could cause this?
View 4 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
When I was booting one day last week I got a nasty BSOD when Windows was trying to load. Then on the next reboot Windows 7 said it couldn't load and needed to do the recovery OS option from the Windows 7 repair on the CD. Well, before trying that I did a cold reboot and it got back into the OS fine so I didn't think much of it. Now, I noticed Ghost shows the C: drive status as "Unavailable" and it can't back it up anymore. It does give me an option to restore from one of my old backups. I'm thinking the MBR got hosed up somehow or something like that. But I'm skeptical to run an MBR repair since I have that 100MB partition on my SSD where my OS resides.
Ghost Shot> This was about a week ago my Windows 7 started acting up right before the big patch Tuesday. I've been running it for over a year now and it's been solid. When I first set it up I installed it on my SSD (Intel 510 120GB) drive. One of the qualms I had with the install is Windows created a separate boot sector on the disk drive where it stored my boot files. This is known the the "system reserved" operating system files 100MB partition. Apparently the way to avoid this is to use a third party partition tool before doing the windows install. That way it will keep the Boot sector files on the same partition which is how I would of liked it for doing restores from Ghost 15,etc. Anyway, ghost was backing up my system C: drive before last week. I have yet to even try and use Ghost to see if it would successfully restore my OS but I've been using it to backup my C: drive anyways. Prior to last week it could backup my C: drive fine. I might try a Ghost restore point from a few weeks back before this happened but not sure yet[CODE]
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View Relatedto debug the dump file as I m having BSOD when copy file to external hard disk. attached is all the info needed.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedI can see my external hard drive in device manager, but not in my comp
View 3 Replies View RelatedWhy do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
View 6 Replies View RelatedWhy do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
View 3 Replies View RelatedI am using windows 7 65 bit sp1, I have a number of films on pc of granddaughter and to save putting them onto DVD I have put them onto an external HD which is NTFS, I have tried to link it up to my freesat box which has a usb port, TV hasn't, unfortunately the box wont accept the NTFS sile system, have tried changing to exFAT, again this isn't accepted, tried friends ex HD which is FAT, (FAT32)? and this works, can I change my ex HD to then old FAT system?
View 6 Replies View RelatedI just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
View 6 Replies View RelatedIn order to make upgrading via a clean install easier -- and because I've been considering one for awhile anyway -- I'm looking at picking up a decent external hard drives right now... and can't seem to find a clear answer to something:
Will I see any drop off in quality of playback or computer performance if I use a drive like this (external, USB) to store all of my recorded videos. The tuner and Media center would save everything directly to this drive and play everything directly from it. Would that cause any problems at all? I notice that it requires no power adapter since it's USB powered, and it has a Interface Transfer Rate of 480 Mbps -- not sure how either of these apply to my potential use of it.
if I could use my external hard drive to install windows 7 on a new build with a new hard drive?
View 2 Replies View RelatedThis isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.
View 5 Replies View RelatedAttached an external sata hd with an esata connection. After power boot, external drive not recognized and also secondary internal sata hd not recognized.
Do I need to do something to the BIOS?Sinch stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
View 12 Replies View Related