I have recently had to ditch my old computer windows xp, and bought a new Dell running windows Hoem repmium 7 (64 bit). I had a 32 bit ide external hard drive and had backed up my files there. Having got the enw copmpouetr set up I am trying to access my archived files on the 32 bit to transfer to new hard disk, but am unable to do so. Windows explorer locks up.
View 3 Replies
after plugging in the external hard drive after a while I get you need to format the disk in F:\ do you want to format?After a while throws another warning saying F: is not accessible, Data error (cyclic redundancy check)It was working well until last week but then suddenly started giving this error message.
View 1 Replies View RelatedI have a Maxtor External Hard drive and Windows 7 Premium 64 bit. I have a user setup for each member of my family on the computer. The maxtor drive was working fine uptil I decided that I wanted only myself to be able to access it only. The drive appeared as my K drive. I went to sharing and added myself as read/write access and removed the everyone share thinking that only I would be able to use the drive. I restarted my PC and now nobody can access it. When I plug the drive into the usb slot the drive whirs up as normal but there is no drive letter for it and it does not appear in device manager etc. I plugged it into my old XP machine and that cannot read it either..
View 2 Replies View RelatedThis morning while i was watching a movie from my Toshiba 500GB external hard drive, there was a windows update going. Because of the lagging due to the update and all, I restarted it after the update is done while my ext. HD is still connected to the computer.
After restarting, somehow I can't seem to access my ext. HD even though the HD is detected. The HD somehow became a "Local Disk K:" and everytime i try clicking it a pop-up telling me that "K is not accessible. The parameter is incorrect".
I googled the problem and found one solution that told me to run a CHKDSK on the command prompt. I ran a "chkdsk /r K:" but then got stuck on the "stage 3 of 5" where the chkdsk is verifying Usn journal. This has been going on for 5 hours and the cursors still blinking.
I can access my HD again? Does the verifying Usn journal really do take this long?
I am using Windows Seven ultimate x64 and I started having a problem when trying to access user's folder under documents and settings or users on any attached external hard drive on my computer. i didn't have this problem before, it started on the same installation of windows and without any changes to my system settings or user settings.
I am a computer tech and I use my computer to backup data before repairing computers so I attach the hard drive to my computer using a USB enclosure. This is limiting my work since I didn't find any solution yet. It's giving me the error below: "you don't currently have permission to access this folder" This is happening on any external hard drive I want to access the user's data.
i took out the hard drive from my laptop that had a BSOD and can't boot. I boutght an enclosure n plugged it using usb to another laptop so i can get my files, but when i click on the disk a window pops up saying disk is not formatted..i dont want to lose my files si i downloaded tesdisk. When i choose "Analyse" it seems that it finds four partitions, but above each one there's a warning "Incorrect number of heads/cylinders 255 (NFTS) ! =240 (HD) or Bad sector head and Bad Ending Head and Bad Starting head..I dont know what to do next.
View 1 Replies View Relatedcan see my external hard drive in device manager, but not able to access it
View 4 Replies View RelatedI have a Titan 500 GB portable hard drive, the computer will after a longer than normal time recognize the PHD, the list of files will open up. But when I try to open the file, I get a non responsive message, then it just freezes.
View 2 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View Relatedunable to access external hard disk?
View 2 Replies View RelatedExternal hard drive salvaged from computer running Windows XPEncased, plugged into USB on new computer running (not by choice) Windows 7(Know where this is going?) Given every permission and ownership to new computer to have its way with docs on external drive. Can't copy docs from external drive to new computer even in (basicithout networking) safe mode. (And haven't tried a mac.)Can I somehow change permissions or ownership on the EXTERNAL drive to access my own documents? Anything else?If I throw it against the wall, will that work? Who is this other administrator to give access, when I'm the only administrator?
View 1 Replies View RelatedI noticed that Windows 7 takes a bit longer to read my photo & video files specially those in my external hard drive. I have to wait for that green bar on top to completely fill-up before accessing my files. Usually takes about 2-3 minutes for each folder. My other laptop which runs on XP displays the files quickly.
View 4 Replies View RelatedI'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
View 9 Replies View Related750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
View 8 Replies View RelatedI have windows 7 64 bit and I'm trying to copy data from my old desktop which won't boot up anymore to my laptop. It is a 3.5 inch sata hard drive which I connected to a usb external hard drive dock. But when I plug it in windows just doesn't recognize it and it doesn't appear in windows explorer. When I go into disk management it recognizes it but says it is not initialized and asks me if I want to initialize it. I'm reluctant to do this as I'm not sure if it will wipe the drive. Any ideas on how I can view my files?
It is a 300GB drive split into 3 NTFS partitions which has both windows xp and windows 7 installed on it.
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
View 7 Replies View RelatedFirst time poster here. I messed up big time trying to get my dell 1747 to dual boot in xp and win 7, i think. I installed xp on to an external hard drive via and esata connection. Now it won't boot without the external hard drive connected and of course will only boot in xp. The xp disc manager say that windows 7 is the primary os which confused me. I Tried the windows 7 recovery disc but it won't boot. I'm completely lost here, and I'm looking for the first step to take. AS it stands I have a C:RECOVERY, D:Fantom(my external to which i installed xp) and E: OS, why is E labeled OS? I could really use some help here.I can't uninstall xp in safe mode with administrator access. I'm wondering if i format the D drive containing Windows xp, if I will Automatically boot from my previous windows 7?
View 1 Replies View RelatedJust upgraded all my hardware and windows needs reinstalling to reconfigure.Trouble is my existing dvd drives are IDE and my new motherboard has no IDE port. I have a copy of windows 7 on an external hard drive in the form of an iso and various files.Is it possible to plug it into a USB port and use the external to install 7 onto the internal? I'd rather not have to buy a Sata DVD drive.Would I need to wipe everything but windows 7 on the external
View 5 Replies View Relatedhow can i install win7 or win xp on external hard drive for cary it with me and use it when i need it as another operating system in usb port in any computer?
View 7 Replies View RelatedI have purchased a new PC with 64 bit Windows 7 OS. My old PC is a 32 bit Windows XP OS. I have a WD Passport 1tb external hard drive connected to the old PC that auto - backs up my files. I have already transfered files from my old PC to my new PC using a Windows Transfer Cable & software. Do I have to perform any changes to the External Hard Drive before I hook to the New Windows 7 PC? I am not sure if I should just hook the external hard drive to new PC and see what happens or what?
View 2 Replies View Relatedhow can i install win7 on a ext hd. I can boot win7 installation files from a ext usb drive, but i cant boot win7 itself.....
View 1 Replies View RelatedI have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedLow disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View RelatedAnytime I have my external hard drive (2 TB Seagate Expansion) plugged into my computer (any USB port) and I try to shut down, it comes alive from sleep after being unused and spins up while Windows is in the blue backgrounded screen that says "Shutting down" and it just completely stops the process of shutting down, leaving it there for minutes and possibly more (can't remember how long at the longest, been so long since I left it plugged before shutting down and I usually just unpower the drive if it hangs).
What causes Windows to randomly start accessing the drive? It only has my movies and music and images and manual backups, so no program actually needs those files and at that phase with the shutting down screen, no other program should be running but the OS itself. (somewhere else it was suggested that any programs still running would cause the drive to spin up when trying to close)Here's my basic system info from the TSG info tool Quote:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz, Intel64 Family 6 Model 26 Stepping 4
Processor Count: 8
RAM: 12279 Mb
Graphics Card: NVIDIA GeForce GTX 560 Ti, 1024 Mb
Hard Drives: C: Total - 114370 MB, Free - 46618 MB; E: Total - 194558 MB, Free - 42107 MB; F: Total - 759306 MB, Free - 37164 MB;
Motherboard: ASUSTeK Computer INC., SABERTOOTH X58
Antivirus: avast! Antivirus, Updated and Enabled
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
View 9 Replies View RelatedI have a WD My Book 110 External Hard Drive and when I plug it in and go to my computer to access the files on it the drive doesn't show, but if I go to the start menu and type b: in the search box it shows the files and the drive also shows in Disk Management, so why isn't it showing in My Computer and how can I get it to show?
View 9 Replies View RelatedI have an external Samsung 640Gb hard drive which is not showing up in Windows Explorer, even though Device Manager shows it as recognized and working properly. I am running Windows 7 Home and this is something new as when I bought the drive it showed up in Explorer. I really need this drive as all my backups and programs are on it!
View 3 Replies View RelatedI have a Maxtor 500GB stand alone hard drive which I originally bought for a Vista laptop, but have also been using it on my new Windows 7 laptop.It has been absolutely fine for the 6 months that I've been on Windows 7, but today Windows Update decided that I needed 27 (count 'em!) updates to be installed an run - mostly for MS Office.
View 9 Replies View RelatedI have no idea where the thumbnail.db is in an external hard drive connected to a computer running windows 7. Is there is such a thing? does an external hard drive have its own thumbnails, or are they only located on the main disk in the computer?
View 1 Replies View Related
