Why Does Windows 7 Create A 100 MB "system Reserved" Partition When Installing
Apr 9, 2012
I've had W7 on two computers that I built: My old one and my new one On the old comuter, W7 installed itself, boot loader and all, on a single partition. However, on my new build, W7 created a 100 mb "system reserved" partition leaving 111 G for data on one of my SSD's which I decided to use for other purposes ( W7 is installed on a second SSD which is partitioned as mentioned). Then, Using "disk management", I deleted the 100 mb partition on the SSD that I wish to use for other purposes, then tried to expand the 111 GB. I got some kind of useless message that said "object does not support this operation". So, the 100 mb "System Reserved" partition is not shown in "disk management" and is not available, nor can I restore it to use.
View 4 Replies
ADVERTISEMENT
Jul 14, 2012
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
View 3 Replies
View Related
Apr 9, 2010
I have a bit of a problem. I recently got a new SSD and configured it to make it my boot drive. I kept my old installation on my hdd and also made a new partition on that device to hold all of the program files, data, etc. Whenever I was finished installing all the programs that I had on my old setup on my new setup and had transfered all necessary documents, I figured it was time to remove the old partition and expand the new data partition to fill the drive. I used gparted to delete the old one and expand the new one.
For some reason, whenever I installed windows 7 on my ssd, it never created a system reserved partition. Everything booted up fine. After deleting my old partition, my system now fails to boot up and gives me the message "BootMGR is missing. Press CTRL+ALT+DEL to restart". Clearly, my computer is now wanting a system reserved partition.
My question is, how do I create a system reserved partition AFTER Windows 7 has been installed?
I have already tried startup repair and all of the bootrec.exe commands, but none of them seem to work.
View 4 Replies
View Related
Jun 28, 2010
I installed Windows 7 RTM 7600 on a new hard disk (previously not partitioned), so I have had the 'system reserved' partition created at Windows 7 initial installation time. I have several of problems with Windows 7, so I would like to reinstall it, but by keeping programs and files. The problem is that the Install file setup.exe looks into 'system reserved' partition rather than checking the C:/ hard drive, and as such does not want to proceed with the reinstall because of a lack of disk space (100 Mo only on 'system reserved' partition)...
- How could I do so making the install looking at C:/ rather than at that partition?
- And during the reinstall could I do so that this partition is not created anymore?
View 9 Replies
View Related
Sep 11, 2010
I have bought a new hard drive to use as my main one, and am planning to use my current, larger one as backup, as i found i was not filling it. So i need to completely duplicate my current drive, a 1tb one, with 180gb of stuff, to my new 320gb drive. i have made a full disc image with driveimage xml, which comes to 180gb, but when i try to restore it to the 320gb one, it says it it too big. How do i gp about setting this up? do i need to copy the system reserved partition to the new drive too for windows 7 to work, or can it not be copied? should i install windows 7 to the new drive from my install disc? if so, how to i get my settings, programs and data back without too mcuh hassle?
View 2 Replies
View Related
Feb 16, 2012
I have a Windows 7 Professional system that I went to take an image of using EASEUS TODO Workstation. When I went to do the backup, I noticed that there was no 100 MB System Reserved Partition. I made the image anyway.When I tested the image on a new machine, it prompted me to repair or start windows normally. Unable to start normally, so I did the repair. After about 10 min, the system came back and said it cannot repair.Outside of start a system from scratch, is there a way I can get the system reserved partition out of the Windows 7 partition?
View 5 Replies
View Related
Apr 24, 2012
Right now i have c: partition and system reserved partition which is 100mb and active bootable partition. How can i merge system reserved and "c" partition and make system bootable. When I am trying to merge those two using acronis disk director ,it says cant merge. [URL]
View 2 Replies
View Related
Dec 22, 2011
For some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
View 8 Replies
View Related
Jan 6, 2012
I accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
View 8 Replies
View Related
Feb 25, 2012
I've two HDD connected to my system , a 1TB & an 160 GB . But now i want to remove the 160 GB HDD . But i noticed a weird problem when i opened disk management . Here is a screenshot :
As you can see my OS ( Win 7 ) is installed on C: drive which is on Disk 1 . While its System reserved partition is on Disk 0 . Now since I have to remove Disk 0 , The System reserved partition has to be moved to Disk 1 . I don't wanna reinstall the OS , so how can i shift the System reserved partition (With all its contents ) from Disk 0 to Disk 1 .?? :-?
View 9 Replies
View Related
Dec 22, 2009
When originally installing Windows 7 Ultimate I noticed it created a 100mb system reserved partition. No probs.
Recently I turned on AHCI in my bios and attempted to do a clean install. This time WinPE did not create a reserved partition and despite creating an 80gb partition to install windows on it said “Setup was unable to create a new system partition or locate an existing system partition.”
Install refused to proceed any further, pointing me to some log files I could not find. I booted from my repair disk and tried to make the partition active, which was already marked as active and tried again. No luck.
I had deleted all partitions on the drive.
So I turned off AHCI and tried again. I missed the "press any key".. and system complained about a "Master boot record error".. I rebooted and tried to do install again. Same issue.
I was able to recover my system from an image I created earlier, but I sure would like to know why the reserved partition was not created, and why windows refused to install. Because I'm going to try again.
I have purchased a new HDD, one that is supposed to be much faster than my old one, which of course has not been formatted. I tried that drive with and without AHCI and had the sasme issues.
View 2 Replies
View Related
Mar 16, 2010
How to Delete the Windows 7 100MB System Reserved Partition ?
View 0 Replies
View Related
Nov 18, 2012
I am gonna do a format reinstall of Windows 7 and I noticed this partition which I believe was created when I first installed Windows 7. Should I just leave it there or can i delete this partition when I format reinstall Windows?
View 1 Replies
View Related
Jan 7, 2012
I installed a new ssd drive and cloned my c drive onto it. It also cloned my system reserved partion [about 25 megabytes].I then, at a later date, cloned my c drive [now my new ssd drive] again back to my old primary drive so that i have an up to date copy of my primary drive. But it also cloned my system reserved partion. Can i delete some of these system reserved partions. I now have 3 of them! It makes my computer look very untidy. What ones should i leave or do i need to leave them all?
View 1 Replies
View Related
May 28, 2012
I've added another HDD to my system. On my older HDD which is 1 TB, 3Gb/s,w/6b of cashe. I have two partitions on it called System Reserved (100 Mb) and Back Up Disk (250 Gb). The newer HDD is 1 TB, 6Gb/s w/32Mb of cashe.My PC will handle the 6 Gb/s transfer rate.Should I put these partitions on the newer faster drive?Can I and/or should I combine these partitions?If I can combine them what size should I make a new Partition @150GB?s above will also relate to the moving the BackUp files too?I've estimated what i think the size of the partitions above should be, should I change them? Down the road I'd like to multl boot with Linux and XP Pro I'm using Windows 7 64b Ultimate it's on a SSD all by itself?
View 7 Replies
View Related
Feb 23, 2011
I've taken a 1TB SATA HDD from a second computer which had Windows 7 OS on it. I have housed it in an external caddy to use as a backup drive for my primary computer. It comes up as two paritions G and H. I've formatted G to give me a 931Gb drive and I have a H drive with 99.9MB which is the System Reserved from the previous Windows 7 install.Can I format the System Reserved partition on the external drive and combine the two partitions to create one external backup HDD?? If I need software tools to do this are there any freeware tools that would do this?
View 4 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Aug 13, 2012
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
View 4 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
Jun 16, 2011
i have been trying to install a RAID array on my system, and due to some complications ended up having to reinstall windoiws from the master CD, now i noticve it has created a drive called "system reserved" - the volume is only 99.8 MB - when i open the drive it contains nothing at all? what is it / how do i get rid of it?
View 6 Replies
View Related
Aug 15, 2012
I'm doing a fresh install on windows 7, instead of a disk it's on a thumb drive
I have a 500 GB Partition I want to install windows toI went through setup and formatted the disk when I try to continue with the installation and get this error.
View 3 Replies
View Related
Sep 3, 2012
I have been trying to install windows 7 on my hd and initially started with ubuntu on partition 1 then resized partition to leave unallocated space for windows 7.Now I am installing windows 7 from cd and can't get past 'where do you want to install Windows' page because of error stated in title.I've tried having unallocated space, a ntfs partition, and now have completely wiped the hd of ubuntu's partitions to clean install windows 7. None of the attempts have gotten me past the location of install page.
View 4 Replies
View Related
Jun 8, 2011
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies
View Related
Sep 19, 2012
I had 32 bit Windows 7 home premium provided by OEM. Recently I purchased Windows 7 professional 64 bit in order to increase my memory.(My system is 64 bit capable) I followed [1]. I am using USB for installation. I booted the system with USB. Then at disk manager I deleted all the partitions(including recovery ) Then I refreshed and click next and I got an error saying setup unable to create system partition.
View 9 Replies
View Related
Jun 4, 2009
whenever i try to install win 7 rc1 64bit on a freshly "formatted" partition (as windows doesn't seem to fully format them prior to selecting them) i get the above error message
i am running on a GA-M55plus-S3G
2 samsung spinpoint sata hardrives and an athlon x2 64 4200+
edit: okay so what i did now was to install an older IDE hard drive and create a new partition on there
it created 2 partitions in total
one was 100MB in size and labelled as system partition the other was the rest of the disk size (it's a 200GB WD caviar) i could start installing win 7 on the larger partition without problems
it's not the best solution as i wanted to run Windows 7 with a raid0 sata array with a new drive i am about to buy but i guess i'll have to bear for now.
View 9 Replies
View Related
May 5, 2009
I'm getting this error when trying to install windows 7 rc x64:
"Setup couldn't create new system partition"
Then it asks me to check the setup log, but I don't know how.
Trying to install onto the 2nd partition of a 160 gb drive, split in half. It's disk 0, the first partition is active primary and has XP. The second partition is formatted ntfs primary and when I select it in windows setup, that's when I get the error message. I let windows 7 delete it and create a new partition and formatted it, but when I select it to install windows onto, it give me the above message.
It's a SATA drive running in native IDE mode on an AMD790GX board with a Phenom II X4 940 and 4 GB RAM.
It doesn't seem like it would be a drivers issues, since Windows sees the drive and both partitions, allows me to delete, create and format partitions, just won't let me install onto it. Any ideas?
View 5 Replies
View Related
Dec 6, 2012
Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"
I've tried to do some procedures, but also can not create partition, do not know what else to do.
View 3 Replies
View Related
Jan 27, 2012
I built a new pc and i want to put windows 7 pro on it. When i try to install i got the message "setup unable to create a new system partition or locate an existing one". How do I fix this?
View 9 Replies
View Related
Aug 4, 2010
This is a fresh Windows 7 install on a 500GB HDD (previously used under XP) In the BIOS the Storage is configured as: Raid. Obviously I have the right raid ICH10R drivers from Asus (they are on a USB drive) Installation starts, Windows sees the disk, I specify the drivers, BUT when I click Next, I get: Setup was unable to create a new system partition. I can delete the partition, create a new one, format it, BUT when I click Next, I get: Setup was unable to create a new system partition. I used Gparted to delete the partition, and tried again - I used Seagate tools to zero the disk (sort of low level format) - If I try to install on a brand new 1TB HDD following the same steps, it installs fine... Both drives are Sata II and I used the same Sata port (only one disk at a time)
View 2 Replies
View Related
Aug 29, 2009
Clean install of windows 7 on 2 160gb sata HDD's set up for a raid 0
when i select a partition to install the OS onto it gives me the error
"Setup was unable to create a new system partition or locate an existing system partition. see the Setup log files for more information."
any suggestions?
View 5 Replies
View Related
Dec 24, 2012
Yesterday i want to install windows 7 on my laptop but when i format Local disk C and click next it says setup was unable to create a new system partition.I boot through Pen Drive. I dont have a dvd rw(not working) and i have Data on other drives[/COLOR]...without wiping data and with wiping data.
View 9 Replies
View Related
