Need An OS Image When Create An Image?

Jun 23, 2011

I am attempting to create a backup image of my Windows 7 OS but when using the native Backup utility I only see a way to create an image with all of my files attached to the image when all I want is just a backup of just the barebones system. I lost my original Windows 7 Install disk so was hoping there was a way to get a copy of the OS since I just recently ordered an SSD. Basically I was hoping to move my OS install over to the SSD while keeping my files on my current HDD intact.

View 5 Replies


ADVERTISEMENT

Backup Image - Create A Second OS Using That Image Of C Driv

Nov 22, 2009

if i do a back up image of my C drive can i then create a partition on the that HDD and then create a second OS using that image of C drive?

hope that makes sense

also can you update images or would you need to create new ones to keep them upto date?

View 3 Replies View Related

To Create An ISO Image From OS

Oct 27, 2012

I have my windows 7 installed as fresh install and the computer works fast and as it was when i bought it . i am wondering about the way that i can make an ISO from my windows so that if there is any problem i can use it to restore my computer to this operating condition, is there any special programs or i can do it using Windows 7, I HAVE DELL data safe but i do not have much confidence on it.

View 9 Replies View Related

Create System Image?

May 2, 2012

I want to create a system image on my NTFS formatted portable WesternD HDD. Now It has about 250GB of space left(the portable HDD), and the Laptop PC that i want to create the image of, tells me I need about 199GB for the system image.Then first time I created the image, it gave me a failure message saying I should run a CHKDSK /R and ty again. I ran a CHKDSK /R on the external drive and tried making a system image again, where it got about halfway and gave me the same message. What is going wrong every time?

View 6 Replies View Related

Create A System Image?

Nov 10, 2011

i am trying to back up and create a system image but evert time i do i get this error THE SYSTEM CANNOT FIND THE FILE SPECIFIED OX87007002, i have window 7 64 bit professional i think the problem is with this system reserved partition

View 6 Replies View Related

Can't Create Dive Image

Dec 16, 2011

When trying to create a system image using Windows 'Backup and Restore' to my external hdd I get the following error: Backup failed. The drive cannot find the sector requested (0x8007001b)' This wasn't occurring until after I did a clean install of Windows 7 Home Premium.

View 9 Replies View Related

How To Create 1.Iso Image 2.transfer It To Another HDD 3.create An OS

Dec 9, 2012

1. How to download in Windows 7 from Internet to a DVD to create an ISO image? 2. If the ISO image is larger than the full capacity of one DVD how do I create the full image? 3. Once I create the full image on one (or more) DVD , how do I transfer the ISO image to another HDD? 4. Can I create an ISO image directly on a 2nd HDD? 5. Can I create an ISO image of the Windows 7 OS on a second HDD? I have tried to create an ISO image for a few months and i haven not been able to do it. Special note: 6. How could I copy the Win 7 OS into an ISO image on one or more DVDs? 6.1 What size is Windows 7 Home Premium OS? 6.2 Which partition does Windows 7 store the OS in?a. "Recovery" ? b. FAT32 ? how to create the ISO image, how to install it, and how to make sure that the "image" could be used to fo make a backup of my HDDs and also how to use the backup to fix the computer should a fatal crash prevented from booting up Windows 7? IMPORTANT: I use only DVDs, mostly re-writables. Which is the best free Image Burn Software that does work with DVD's.(as I dont use CD's anymore)

View 1 Replies View Related

System Image On External Hard Drive Is Not Accessible While Restoring PC From Image

Sep 4, 2011

OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.

The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.

View 4 Replies View Related

Create System Image After Each Backup

Nov 2, 2009

When I use Win 7 backup, it gives me the option each time I create a backup to create a system image. I created a system image on a CD a couple of days ago. Why does it ask me if I want to create another each time I do the backup? Is it talking about creating one on my hard drive, not a CD?

If it's just my hard drive then perhaps I should create one each time, but creating one on a CD is onerous. Plus, if this is the case, (that it wants me to create a CD) I don't know how that's to be done if the backup is on a schedule in the middle of the night.

View 3 Replies View Related

How To Create An Image File Of Windows 7

Sep 4, 2011

I have a Windows 7 machine that i have installed on it all the neccesery programs that i need. I have about 10 computers with the same hardware that i would like to put on them the same Windows 7 as i have in the prototype machine. My question is:

1: what kind of porgram can i use in order to do that easly.

2: my windows 7 is activated with a KMS server on my network, is it suppose to be a problem?

View 5 Replies View Related

Unable To Create A System Image On DVD

Nov 3, 2009

I have Win 7 64 bit installed on my laptop as well as my desktop. System images for both are on external HD's.

On the laptop, I have created a system image on blank DVD's using DVD-R's. No problems -- I can restore from the DVD's.

However, when I try to create a system image on blank DVD-R's on my desktop, I get a message saying something like, "format was unsuccessful." If I use a DVD+RW the process runs to completion and I can restore from it. I had to use RW's because I don't have and +R's.

I get the same unsuccessful message if I try to format a blank DVD-R with Win 7.

My DVD burner on the desktop says it is a +R. Does that mean I can't use -R's.

I've no idea whether this is a Win 7 problem, burner problem or a problem on my part.

Would someone please try to straighten out the dense old mind?

View 3 Replies View Related

Start Orb Image - Create Custom

Mar 25, 2010

How to Create Custom Start Orb Image ?

View 0 Replies View Related

Macrium Free 5 Couldn't Create Image

Mar 13, 2012

I recently built a pc and all is well. Clean install of Windows 7 HP 64. For the first couple of days I was in and out of the system as the default admin (user you are asked to create during Windows 7 install). It wad during this time I installed macrium reflect free 5. I images the system after getting all the drivers in and then set up a scheduled backup for 7am each day. Worked fine.

Now I have created a normal user for me without admin privilege (for security reasons) which will be my day to day login. However this morning macrium failed to run the scheduled image. I was logged in as me, the low lvl user, not admin. The log file had an error about being unable to access adminxml file

I'm guessing this is because I installed macrium whilst an admin? Additionally I created the xml file whilst admin and then turned it into a schedlue whilst admin. However the xml and schedule are both set to run as admin with the admin password typed in.

Macrium is available to me as a normal user but when I launch it I'm asked for the admin password. Just trying to give as much info as poss.

View 8 Replies View Related

What Is Difference Between Backup Now, And Create A System Image

Apr 15, 2012

On the Backup and Restore page, it lists the two Thread title options?-

I read that you can't restore individual files from system image, but I'm wondering if I need to create both in order to do an emergency system restore using boot disc/or... (D: drive)?

View 1 Replies View Related

Windows 7 Pro - Create System Image Only For C Drive

Sep 3, 2012

I have a 1TB drive that partitioned with 120gb system and rest is a non primary/non boot data partition volume... I've never used windows 7 create system image, but want to. When I try to create a system image it insist on backing up both drives. I don't see how to deselect the data drive. Is this because I have installed something system related. on the data drive? And Finally, how will recovery of a system image works if I get a blue screen, do I need to install windows 7 again first or have a repair CD? I noticed when I started a create system image it asked me for the destination drive, no exact path on the drive, does the image have be created on the root of the destination drive?

View 1 Replies View Related

Create A .iso Image File Of Pre-installed Windows 7?

Oct 30, 2012

I bought a laptop with an OEM serial key and I got windows home basic with it. My internet has limitations and I cannot afford to download a 3 GB .iso or image file of windows 7 home basic. Incase my system gets corrupt or anything happens I would like to have a backup of my whole OS, so is their any way to extract the whole OS from my computer to just one ".iso" file? which later I can convert into a bootable USB flash drive of disc. Plus if possible can I make the iso file which contains my OS and also all the drivers pre installed?

View 9 Replies View Related

Create System Image Problem/errors ?

Nov 8, 2009

anybody else having this issue with the upgrade of Windows 7 HP on a HP machine as a matter of fact as well with there upgrade version.

It's like what i am trying to do is this.

New with True Image - Couple basic kinda questions ??? | Forums

That is my post an explain pretty much what i am trying to do (even though that one focus's on that certain program for questions there but)

mainly trying to do a system restore image disc. That way every time i want to or have to reformat i do not have to go through the whole damn going back to Vista then the whole upgrade process again.

Anyways so speaking with HP of course we know there is no way to do this or for me even to get a HD with factory Windows 7 installed on it WITH a Windows 7 recovery partition factory done. So this is really the only way to do it. Where it would kinda actually be like a Windows 7 recovery partition.

OK with that being said. Speaking with HP came up the idea and notice the new features and system in the backup and recover section where you can create a repair disc or create a system image.

Well they said to create a repair disc and i could use it to go back to a so called day one install or fresh install/upgrade of Windows 7.

OK we know this is not true as it is only a repair disc only so.. This is where it gets back to "is these screwed up and not working for you guy's either" as the title say's.

The one link inside the backup section that says "create system image" is not working. It kinda stops and freezes up half way through on same spot every time. When it gets to disc#3. It tells to take out and insert another disc label it blah blah blah.. but at that point will not even open the disc tray. Gotta cancel it out and then restart (even to open the tray and get the disc out). More less to even try and finish the process. Which i tried it 3 times and same thing every time.

Using dvd-rw's as well. My systems fine and plenty bad azz so i know that's not it either or that that is what is making it freeze up. Soo.. anybody else try this yet and having the same problem with that feature?

View 8 Replies View Related

Cannot Create A System Image Or Backup Computer

Nov 15, 2009

I have tried every trick in the book to creat a system image whether directly or via backup computer. I am receiving those error messages; 0x8078011D when I try to create a System Image from the left bar and; 0x81000032 when using backup computer.

View 5 Replies View Related

Can Create A System Image Of Just Programs / Applications

Oct 9, 2012

I've been using computers ever since Windows 3.1 and '95 and I have been plagued with dozens upon dozens of hdd crashes and similar occurrences which forced me to reformat and reinstall all the programs I use (and have to search and find them again...). I have learned a lot since '95. One method of keeping my apps and media safer is by keeping them on a separate larger internal hdd and running my OS on a smaller ~400gb hard drive. I have just gotten into creating full system images with Acronis that fill up 3+ blu ray discs, which is ok if I'm only making one ever, but my documents and programs consist of more than half of that data. It would be nice to make one full system image right after I reformat my computer and install all device drivers I'll be using; my questions below are in regards to making images of the programs to allow very simple install later. Let me say this as well: I know of the extreme difficulty of taking a system image created on 'PC A' and using it on 'PC B'.Basically unless PC A and B the same brand and model something is bound to not work correctly due to driver issues and hardware incompatibility. Anyways, what I am interested in now is to get one of my computers installed with all the software and plugins I typically use and create a "system image" consisting of only my programs and the necessary files to have them run properly. I understand this may be unfeasible but I'd like to further my knowledge and hear from others their ideas to my problem. I say it may be unfeasible because, when installing a program, files are saved into many different directories, including various folders within "Users" and the hidden folder "ProgramData" (as well as possibly to the "Windows" folder and/or C: as well as the computer's registry).I feel this may work if I get every file that was created at installation time as well as run windows 7 on all of my computers that I'll be using this "software-only system image" on.Is there any software that will allow me to accomplish my goal or at least make my job easier?If this is possible and assuming I'll only be using 64-bit versions of Win7, will I run into problems between, say, Home Premium and Ultimate? Is the structure or layout of the OS different in the ways / directories it installs programs into?If the above fails or is impossible then.I was considering another idea but with more work for me.In school, both high school and college we had computer labs and every computer had the same programs installed and there were many programs (say 20 programs * 100 computers in the larger labs). Albeit the computers were the same make/model, lets forget that fact for the purpose of this question, as well as the fact that all the computers were networked together which may allow little tricks here and there... Forget those facts and here is my last question: Instead of just having an image of already installed programs would there be a way for me to somehow install, say, 50 programs without launching each one individually? I would be very surprised if a program like this didn't already exist for IT people yet. For example, in a law firm, if someone in the office gets a virus do they call in the IT guys and they 1) reformat the computer 2) install OS 3) reinstall all required software one after the next? Seems a bit time consuming, in my example 20 apps * 100 computers, I couldn't imagine installing the same programs 2000 times.

View 3 Replies View Related

Create OS Image Only For Re-installation From Partitioned Hard Drive?

Jul 19, 2012

Not exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?

View 9 Replies View Related

Unable To Create System Image Or Restore Point

Dec 19, 2009

I currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)

View 9 Replies View Related

Create A System Image On A 64GB Thumb Drive?

Mar 26, 2012

I am curious as to how I would create a system image on a 64GB thumb drive.

View 9 Replies View Related

Image Restore Can't Find Backup Image?

Aug 24, 2009

I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.

View 9 Replies View Related

Windows-7 Image Versus Acronis Image?

Dec 14, 2012

With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?

View 7 Replies View Related

Create System Image Won't Detect External Hard Disk?

Feb 27, 2012

This isnt the first time i use the windows backup to create a system image, ive done it before using this external hdd with no problems at all.But now, for some reason it wont detect this hard drive, it only gives me the option to store the image on a dvd, i dont know why?, i tested the hard drive on a different computer and IT WORKS, i tried to create an image and it does work.

View 5 Replies View Related

Attempting To Create A Backup System Image / Not Enough Space Error

Mar 18, 2012

I'm belatedly trying to create my first system recovery backup, on a system which I first installed Windows back in November 2011.I have a 1TB drive with a 214GB partition that I set up for a backup. I manually store all my media and pictures to both a separate partition on the drive, in the cloud, and on a separate external HDD, so all I really want to back up is the system image.This is the newbie sounding question to confirm my suspicions: The system drive I'm trying to back up is definitely bigger than the partition I've set aside for recovery. My C drive is a 473GB partition, and I'm using maybe a bit more than half of that currently. If this is the case, is there a way to reallocate un-used disk space from my other partitions to make the recovery partition larger, or should I be biting the bullet and shelling out for a 500GB external to cover my system recovery needs?

View 3 Replies View Related

Create A Backup Image Of A Clean Install Of Windows + Certain Applications?

Aug 29, 2011

I'd like to create a backup image of a clean install of Windows + certain applications.My plan is this: Format my SSD that I am currently using. Install fresh windows 7, do all the updates, install a few choice applications, and then get an image of it to use for recovery. I have a few questions on this topic as well:

1. This is probably obvious, but I want to make sure; I can store the image wherever I like, correct? If I am using an SSD for my boot drive, I can image that, and store the image on a regular hard drive, right?

2. How big will the image be? Is it going to be as big as the entire drive that I back up? I cannot imagine how it would go any differently, but I am hoping for some unrealized magic.

3. Do I need to buy the Ghost software? If not, does it make imaging a whole lot easier to make it worth the price tag?

4. How arduous and time consuming is the actual recovery process?

p.s. Something I just thought of. I don't know how I would do the actual backup without an OS to interface with so maybe I could make the image contain everything except the basic install of windows to cut down on space and time. Is this feasible?

View 7 Replies View Related

Create System Image - Backup Failed / Device Not Connected

Jan 9, 2010

I recently built a windows 7 home premium PC with an Intel 160 GB SSD as (C) for OS/programs and second 1TB HDD as (D) for data and backups. I also have a DVD burner (H). They are all SATA drives running in AHCI mode. Immediately after installing just windows, I used the windows backup feature to successfully create a system image to a local disk (D) which was and still is nearly empty. The next day, after installing drivers, updates, and a few programs, I went to create a second system image but this time it failed. The process started as it should have but halfway through it failed with the following message:

"The backup failed"
"The device is not connected (0x8007048f)"

At that point, after exiting the program, the D drive does not show up on my computer. Upon rebooting the D drive reappears. I searched the web and found some references to checking whether volume shadow copying services and their dependent services were working and that didn't work. Another reference said to try updating to a newer bios as some have bugs that screw up the enumerator for the drive order. The BIOS I use is the latest and wasn't changed since my first successful attempt at creating the system image.

Windows 7 Home Premium
Gigabyte GA-P55A-UD4 Bios 6 (latest)
Intel 160 GB SSD (C) OS
1 TB HDD (D)
Raedon 5770
4 GB DDR3 RAM

View 3 Replies View Related

How To Create Windows Image Bootable Partition In Hard Drive

Dec 27, 2012

how to create windows image bootable partion in my hard drive

View 1 Replies View Related

Software To Convert 2d Image Into 3d Image?

May 28, 2012

now am using win7 hme basic, can u tel me vch software is helpful 2 chage 2d image to 3d image

View 2 Replies View Related

Backup Complete Computer - Create An Image Backup

Nov 22, 2008

How to Create a System Image Backup in Windows 7 ?

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved