After successfully restoring the Windows7 image from partition 2 (/dev/sda2) to partition 1 (/dev/sda1) using Clonezilla, Windows7 is no longer able to boot and displays the following error messages:
Quote: Windows Boot Manager
Windows failed to start. A recent hardware or software change might be the cause.
[...] Info: The boot selection failed because a required device is inaccessible To solve this particular issue, I rebooted with the Windows7 DVD and hit Repair... which didn't work. But even if it did, I can't do this every time I restore an image to test. Note that I used the same laptop to save and restore the partition, so it's not HAL-related.
Here's what the Repair screen says (poor man's screenshots): Attachment 201071 Does someone know what can be the cause for this error, and what can be done before saving and/or restoring an image with Clonezilla?
After restoring an image made with Clonezilla that used to work, Windows 7 is unable to start. When prompted, I used the DVD, but it still fails with "Startup Repair could not detect a problem".When rebooting, it says "Windows Error Recovery: Launch Startup Repair (recommended) and Start Windows Normally": Launch Startup Repair fails with "Windows Boot Manager: 0xc000000e The Boot selection failed because a required device is inaccessible".FWIW, to investigate, I deleted both partitions (#1 to hold the OS, #2 to hold images) and re-created them with enough space to hold (#1 was made a bit bigger because I didn't know how to specify infos in cfdisk accurately), and Clonezilla happily restored the image.
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
we have two different PC's[PC1 and PC2](hardware totally different) PC1 After preparing all my windows 7 (installing programs, configuring them, installing updates, activating programs and so on) I make my drive C: total image back up to external hard drive. PC2 I Boot up windows 7 recovery startup and choose restore from image and then I put in external hard drive with usb and make it restored on my other computer. Everything looks fine, it finishes with no errors and then system restarts. When windows are finishing to show "Windows starting" screen, computer restarts instantly.Then system autimatically suggests me to repair it, so ok then auto repairs are scaning and guess what it can't repair, because it finds some kind of problem with drivers, could be that they are incompatible with my new PC.how to make this work, how to fix issue that old PC's drivers are being loaded, maybe I am able to turn it off so default drivers are being loaded?The reason why I want to make this work cause I want to use it for multiple computers.
Simple summary:
PC1 Windows Image backed up to external HDD PC2 Windows Image restored from external HDD PC2 Windows can't start because of driver error
1) I have a PC running Win7 with 3 HDs(not partition, different HDs).
2) I used Win7 to create an image of the OS HD( C: ) and placed it in D.
3) I used the image once or twice so I know it's a god image, and it's not corrupted.
4) Lately I've been having performence/computer-gets-stuck-issues and I suspected the HD( C: ) because my RAM is fine, and finally windows alreted my that that HD is failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.
5) I replaced the HD that was C: with a new one, and installed Win7 again.
6) Tried to restore using the image and the recorery system said that it needs to format the drive that it's on(makes sense) and ordered me to perform the restore through the windows installation disk,
7)I did. but I get a similiar error that ordered me to restore with an image but using a windows installation disk(and I got to this error using the instllation disk) How can I make the image work?the only problem I can see is that the image was taken off a a different HD than the on I'm trying to restore the image to,but still that's not a good reason for it not to work.
I have a PC running Windows 7 with 3 HDs(not partition, different HDs).2) I used Windows 7 to create an image of the OS HD(C and placed it in D.3) I used the image once or twice so I know it's a god image, and it's notcorrupted.4) Lately I've been having performence/computer-gets-stuck-issues and Iuspected the HD(C because my RAM is fine, and finally windows alreted my that that HDis failing.(plus, I can hear "ticks" of the HD's nittle trying to read whenever the computer got frozen for a sec or two.5) I replaced the HD that was C: with a new one, and installed Windows 7 again.6) Tried to restore using the image and the recorery system said that it needs to formatthe drive that it's on(makes sense) and ordered me to perform the restore throughthe windows installation disk,7)I did. but I get a similiar error that ordered me to restore with an image but using a windowsinstallation disk(and I got to this error using the instllation disk)How can I make the image work?the only problem I can see is that the image was taken off a a different HD
I had an HP 6310y Desktop (1 TB hdd) that died as well as the mobo. Luckily, I created a system image onlu 3 days prior to the crash. I have very important data on the hdd (business, wedding photos,etc). Im about to order a new PC but in the meantime, Im trying to restore the image in order to extrapolate that important data so I can burn to CD
1) I have a Samsung RV520 (640gb). I tried to restore my image over the samsung in order to do this. However, it prompted me "The system image restore failed. Windows cannot restore a system a system image to a computer that has different firmware.*The system image was created on a computer using BIOS and the computer is using EFI."
I've been placed in charge of setting up new PCs at work.These are tablet PCs and the hardware in each is identical...I've now setup one PC to function EXACTLY how I want it.My question is, what's the best way to image the entire drive and then load it onto subsequent PCs (please nothing like PXE) the restore will be done from a USB thumb drive.
My main desktop PC having HDD only setup, then I bought a Intel 320 Series 80GB SSD and migrated my system over to it using Intel's software, then made the HDD a storage drive due to limited space on my SSD. Fast forward to now. My SSD is basically dead from a firmware bug that makes data irrecoverable without some special algorithm that professional data recovery centers have. Oddly enough, it came back to life, I rebooted, imaged whole system including both drives. I had been doing this, but most recent backup was a month prior, so I stood to lose quite a bit that I had done over that month stretch. The new image went great. I was saved and so excited. Apparently that was a one and done deal, as it never has worked since then.
I intend on ordering new (bigger) SSD to replace it, keeping setup the same, as new SSD will still be too small. Now from my understanding, I can restore my image to both drives and everything will be as it it never left? Is this correct? How about things like partition alignment or special SSD configuration that I had to do some of when I first configured it as so? Is that carried over since it would be in the image or am I good to go once restore is complete? Also, in meantime, I have another SSD in box, but it is smaller. Is it worthwhile to use that temporarily, then migrate system over to new SSD when I get it? Or should I just wait until I get new SSD and restore current image to that?
I am trying to do something very similar, but not quite exactly the same as here. I hope that there might be someone here that has some tips that would be useful to what I am trying to acheive.
I just got a new system running Windows 7. I bought the "professional" version of Windows 7, so that I would be able to run "XP only" programs. I have some old software from companies that went belly up and no longer provide support. I was told that the professional version would run these programs, but I guess I didn't do my research well enough. They are not compatible.
What I would like to do now is run a dual boot between Windows 7 and XP. The difference in my case is that rather than doing a clean install of windows XP on the new partition, I would like to restore an image that I have of my old computer's drive (running XP) to the new partition on the new system (running Windows 7). Restoring to a new hardware environment shouldn't be a problem in theory, since I am using Acronis True Image Home 2011 with the add on that facilitates this.
I am assuming that the process would be the same, up until the point that the directions here say to insert the CD to install windows XP.
I just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
I have got Dell Studio 1558 Laptop. When I received my laptop, the full 480 GB was in a single drive and using device manager i splitted into 3 drives. Now, if I use Dell Restore to factory image option should it have some effect as the original c drive when shipped is currently less. Just want to know this as I will be using this feature.
I recently got a SSD for my comp, before installing I did a backup of windows and included the system image option. I am now on a fresh install of windows but can only restore the files I had on my old windows and not the entirety of windows (programs, program settings.. ect). How can I use this image to put everything back exactly the way it was before?
Ive owned a dell studio 1558 laptop for almost 2 years now and have recently been experiencing some overheating issues, among my many solutions "new thermal paste, cleaning the inside" and a virus scan using Avast, which discovered a four digit number of corrupted files followed by their deletion and subsequent problems due to now missing some .dll files making me unable to run anything or access the internet. Ive decided I should restore the laptop to its factory settings which I believe I have done before. The problem now is that once I reach the Advance boot menu using F8, I press enter on the "repair your computer" option which is followed by a bar saying windows is loading files, lasting one second, and then windows loads up and nothing changed.
After restoring my pc from a system image, when windows resarts, it won't boot, & I'm taken to the "startup repair" option screen. After Startup Repair is performed I get the message "Startup Repair Cannot Repair This Computer Automatically" with the following problem details:
Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 52 Problem Signature 05: AutoFailover Problem Signature 06: 1 Problem Signature 07: BadPatch OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1033
It says that the root cause found is "A patch is preventing the system from starting" Error code = 0x490.
Somehow at MicroCenter when I picked up a handful of spinpoint drives I accidentally grabbed 4 spinpoint f3 drives series "J" and a 5th one which in the same pile, was one of the ecogreen drives. I'm using clonezilla to get my OS from the green drive to one of the F3 drives, but Clonezilla (partclone) is stuck at 100%. Does this mean there are bad parts on the source drive? If so, should I check the option in clonezilla to keep scanning if it encounters a bad sector? Is the computer waiting for me to just restart it?
I've been using Clonezilla-Live for awhile now to create images of my Win 7 and other OS installs.Clonezilla provides the peace of mind that only a bit by bit image backup regimen can provide (IMHO).It does have a learning curve however.I've created a guide to using Clonezilla to clone estore a partition.I've posted this guide at another forum (Scot's Newsletter Forum-All Things Windows).
So i had two partitions on a physical disk, and wanted to delete the first and enlarge the second. I usually use gparted off the ubuntu live cd because it completely separates itself from windows details and allows a lot of disk changes in one interface; no conflicts. I moved forward with my changes and rebooted the computerI now find myself standing at this boot screens with error 0xc0000225 and a "corrupt" /boot/bcd file. Googling that information, the first hit was a solution about using gparted and getting this error. I thought perfect, but going through the steps, i still have no resolve. I have now been in and out of every boot problem thread on the internet and cannot figure it out.I have tried: windows 7 repair startup tools- rebuilding the bcd from scratch- bootrec /fixmbr and /fixbootWhen i boot into ubuntu or repair mode, i can browse the file system fine. can see the /boot files, create a new bcd file, and so on. One thing to mention is every test i have tried yeilds the same consistent error. The error has not changed whatsoever. My assumption is not that the /bcd file is corrupt or configured wrong (as the gparted solution/post suggested)
I got a dual boot with GRUB2, Arch Linux + Windows 7 Pro x64.Always used it with no problems, and now the Windows loader can't work.I only managed to read the status value, 0xC0000225, and something like "boot manager generic failure", "a required device is inaccessible".I tried using the repair function from my full retail dvd, but it didn't work as well. I think it's because it acted on the windows partition, while the windows boot is stored in another partition of about 100mb, wich was created automatically during the dvd installation.So I guess the solution would be giving to the repair function the right drivers to let it "see" the boot partition, but how?
My system specs:
Windows 7 Pro x64 Full Retail The machine is a laptop, 1.5 years old OS installed a few months ago
When it tries to load it gives me this error:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert your Windows installation disc and restart your computer.2. Choose your langiage settings, and then click "Next."3. Click "Repair your computer".If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc0000225Info: The boot selection failed because a required device is inaccessible.And I can press enter to continue or esc to exit (in both cases the computer restarts)When I insert my windows installation disc and choose "repair my computer" it says its looking for windows installation but it keeps looking forever.
I tried starting my computer today, but it kept coming up with a screen that said: Error 0xc0000225 Boot selection failed because the required device was inaccessable"I tried googling it, but the problem seems to come frop people messing with partitions.I haven't so much as looked at a partitioner siince I got the computer (Just the two standard partitions: the system one and the C: drive)
So basically I have two partitions: Vista C: and Windows 7 D:, boot file is on C:
I had installed Jolicloud OS on my computer and it carved out a drive from my Windows 7 partition. later on I EasyBCD to remove grub when I figured out that it will be a pita to get my wifi working. afterwards i booted from the jolicloud installer, then used Gparted to extend the Windows 7 partition back to it's original size. i then rebooted, and it ran the disk repair, but now Windows 7 won't boot, giving me:
0xc0000225
"Windows did not start correctly. A recent hardware or software change might
be the cause.
If you have aWindows installation disc, insert the disc and restart your
computer. Click system recovery options, and then choose a recovery tool.
(Startup Repair, available in some versions of Windows, can automaitcally
diagnose and fix startup problems.)
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
I've tried to use the recovery feature on my disk, but it cannot see my hard drive and it's not able to locate a driver.
help? Windows Vista is AGONY
also: Easy BCD whe running from Vista says:
There are a total of 2 entries listed in the Vista Bootloader.
Bootloader Timeout: 10 seconds.
Default OS: Microsoft Windows Vista
Entry #1
Name: Windows 7
BCD ID: {6d574dfa-cef3-11de-a588-9966156464d7}
Drive: Deleted Partition
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows
Entry #2
Name: Microsoft Windows Vista
BCD ID: {current}
Drive: C:
Bootloader Path: Windowssystem32winload.exe
Windows Directory: Windows i'm going to re add the entry for 7 via easybcd. if you don't hear from me in ten minutes then you will know that this didn't work.
i have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i shut down before i waiting the opening screen of windows. and when this error comes it says1) continue bla bla2) do system restorewhen i select system restore it gave an another error like "cannot access required driver".
I'm having this error for a while now. this: 0xc0000225 Boot selection required device is inaccessible What happened before this is just a forced shut down because the computer is lagging. After that, this error in now showing up. I have a recovery disk but I can't manage to open it up, cause I dont know this stuffs
my computer, a toshiba satellite L655D-S5159, has been broken recently. At first, I got an infinite startup repair loop, because of a corrupted registry. I checked the registry files and they are all 256kb. I tried to run sfc /scannow and chkdsk /f /r, but that didn't do anything. Then I tried to run bootrec rebuildbcd, and now I'm getting error 0xc0000225 at startup.
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
With either of these two Products, if I create an Image will the Image "include" everything on the Partition?What I'm asking is, in the event I "delete" something from a Partition, and presuming the "deleted" item is not overwritten, will the "deleted" item be part of an Image created AND restorable by Windows or Acronis?