BSOD Booting, Error 0xC0000225

Mar 12, 2012

I got a dual boot with GRUB2, Arch Linux + Windows 7 Pro x64.Always used it with no problems, and now the Windows loader can't work.I only managed to read the status value, 0xC0000225, and something like "boot manager generic failure", "a required device is inaccessible".I tried using the repair function from my full retail dvd, but it didn't work as well. I think it's because it acted on the windows partition, while the windows boot is stored in another partition of about 100mb, wich was created automatically during the dvd installation.So I guess the solution would be giving to the repair function the right drivers to let it "see" the boot partition, but how?

My system specs:

Windows 7 Pro x64
Full Retail
The machine is a laptop, 1.5 years old
OS installed a few months ago

View 3 Replies


ADVERTISEMENT

Windows 7 Wont Boot. Error 0xc0000225?

Nov 21, 2011

When it tries to load it gives me this error:Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:1. Insert your Windows installation disc and restart your computer.2. Choose your langiage settings, and then click "Next."3. Click "Repair your computer".If you do not have this disc, contact your system administrator or computer manufacturer for assistance.Status: 0xc0000225Info: The boot selection failed because a required device is inaccessible.And I can press enter to continue or esc to exit (in both cases the computer restarts)When I insert my windows installation disc and choose "repair my computer" it says its looking for windows installation but it keeps looking forever.

View 5 Replies View Related

Windows Boot Hangs, Error 0xc0000225

May 7, 2012

I tried starting my computer today, but it kept coming up with a screen that said: Error 0xc0000225 Boot selection failed because the required device was inaccessable"I tried googling it, but the problem seems to come frop people messing with partitions.I haven't so much as looked at a partitioner siince I got the computer (Just the two standard partitions: the system one and the C: drive)

View 8 Replies View Related

0xc0000225 Boot Error After Extending Partition

Dec 15, 2009

So basically I have two partitions: Vista C: and Windows 7 D:, boot file is on C:

I had installed Jolicloud OS on my computer and it carved out a drive from my Windows 7 partition. later on I EasyBCD to remove grub when I figured out that it will be a pita to get my wifi working. afterwards i booted from the jolicloud installer, then used Gparted to extend the Windows 7 partition back to it's original size. i then rebooted, and it ran the disk repair, but now Windows 7 won't boot, giving me:

0xc0000225

"Windows did not start correctly. A recent hardware or software change might

be the cause.

If you have aWindows installation disc, insert the disc and restart your

computer. Click system recovery options, and then choose a recovery tool.

(Startup Repair, available in some versions of Windows, can automaitcally

diagnose and fix startup problems.)

If you do not have this disc, contact your system administrator or computer

manufacturer for assistance.

I've tried to use the recovery feature on my disk, but it cannot see my hard drive and it's not able to locate a driver.

help? Windows Vista is AGONY

also: Easy BCD whe running from Vista says:

There are a total of 2 entries listed in the Vista Bootloader.

Bootloader Timeout: 10 seconds.

Default OS: Microsoft Windows Vista

Entry #1

Name: Windows 7

BCD ID: {6d574dfa-cef3-11de-a588-9966156464d7}

Drive: Deleted Partition

Bootloader Path: Windowssystem32winload.exe

Windows Directory: Windows

Entry #2

Name: Microsoft Windows Vista

BCD ID: {current}

Drive: C:

Bootloader Path: Windowssystem32winload.exe

Windows Directory: Windows i'm going to re add the entry for 7 via easybcd. if you don't hear from me in ten minutes then you will know that this didn't work.

View 8 Replies View Related

Status: 0xc0000225 Windows Boot Error?

May 31, 2011

i have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i shut down before i waiting the opening screen of windows. and when this error comes it says1) continue bla bla2) do system restorewhen i select system restore it gave an another error like "cannot access required driver".

View 1 Replies View Related

BSOD When Booting Computer Error 0x000000ed

Jan 4, 2013

When I try to boot my windows 7, it fails and a blue screen appears, stating that the error message "Stop: 0xed". I try to repair windows, but it fails.So, I reinstall my windows 7. And it works fine in several days, but the blue screen occurs again. I have encountered this situation several times. Reinstall, blue screen, reinstall.I found that before the blue screen occurs, my computer shut down normally.

View 5 Replies View Related

Windows Didn't Boot Up After Update.error 0xc0000225

Apr 24, 2012

windows didnt boot up after update. error 0xc0000225 info: The boot selection failed because a required device is inaccessible.

View 1 Replies View Related

Startup Repair Loop / Error 0xc0000225 Corrupted Registry?

Nov 11, 2012

my computer, a toshiba satellite L655D-S5159, has been broken recently. At first, I got an infinite startup repair loop, because of a corrupted registry. I checked the registry files and they are all 256kb. I tried to run sfc /scannow and chkdsk /f /r, but that didn't do anything. Then I tried to run bootrec rebuildbcd, and now I'm getting error 0xc0000225 at startup.

View 1 Replies View Related

BSOD Booting Into Full Mode, Safe Mode Works Stop Error 0x0000003b

Feb 8, 2012

I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:

An error occured while attempting to generate the report. The system cannot find the path specified.

View 6 Replies View Related

BSOD While Doing Nothing Or Just After Booting

Sep 2, 2012

I've got a new copy of windows 7 (32 bit version) I have got 4 GB ram only 3,25 in use (like I had on the XP version, running on the same PC) and after I boot up the PC I just look at the desktop, play with some random games, create and delete folders, do some little stress to the RAM or sometimes just doing nothing. The only boot that works is safe mode and its variants. Things that I've done in the past 7 days:

- I checked RAM integrity - no errors
- Everything is up to date (drivers, everything) - it BSOD'ed even with a fresh copy of Windows 7
- I use wireless if that is a problem, found some errors about it and will post them after this list
- Enabled services and disabled them VIA msconfig (toying around I found out that it WONT CRASH with any internet service on normal mode)
- I checked Windows 7 compatibility and it's 100% compatible
- Tried to update BIOS but I don't think it will solve anything anyways
- Used dozens of registry cleaners (CCleaner and lots; lots more) - still nothing
- Put a second HDD on my machine with Windows 7 same version, it still crashed, but on the other machine the second HDD works great.

Event 7001: The Computer Browser service depends on the Server service which failed to start because of the error: "The dependency service or group failed to start. Event 10005: DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-505054503030}

View 3 Replies View Related

After Partition Changes, 0xc0000225 And Cannot Boot?

Mar 6, 2010

So i had two partitions on a physical disk, and wanted to delete the first and enlarge the second. I usually use gparted off the ubuntu live cd because it completely separates itself from windows details and allows a lot of disk changes in one interface; no conflicts. I moved forward with my changes and rebooted the computerI now find myself standing at this boot screens with error 0xc0000225 and a "corrupt" /boot/bcd file. Googling that information, the first hit was a solution about using gparted and getting this error. I thought perfect, but going through the steps, i still have no resolve. I have now been in and out of every boot problem thread on the internet and cannot figure it out.I have tried: windows 7 repair startup tools- rebuilding the bcd from scratch- bootrec /fixmbr and /fixbootWhen i boot into ubuntu or repair mode, i can browse the file system fine. can see the /boot files, create a new bcd file, and so on. One thing to mention is every test i have tried yeilds the same consistent error. The error has not changed whatsoever. My assumption is not that the /bcd file is corrupt or configured wrong (as the gparted solution/post suggested)

View 9 Replies View Related

BSOD While Booting Into Windows 7?

Dec 11, 2011

im having a BSOD problem when booting into Windows. Only sometimes. Need to know if its a MB issue so i can submit a RMA?

View 7 Replies View Related

BSOD When Booting Up New Motherboard & CPU

Feb 19, 2012

I just bought a new motherboard and CPU. They are an ASUS P8Z68-V LX with an i5-2500k processor. It goes through the boot cycle all the way up until it says "Starting Windows", then it pauses and flashes BSOD for a split second.

View 3 Replies View Related

BSOD Usually Within An Hour Of Booting

Sep 23, 2012

I recently started having problems where my computer will randomly BSOD. After that i get an error saying no boot manager can found and I just have to manually restart my computer. Ill attach the diagnostics .zip

View 7 Replies View Related

BSOD When Booting Up Any Game?

Oct 12, 2012

My laptop runs fine until I try to boot up any game. This makes me believe that the problem lies with my gpu.

My gpu is nvidia geforce gt 540m. The main BSOD error says: Attempt to reset the display driver and recover timeout failed.

View 1 Replies View Related

0xc0000225 After Restoring Image With CloneZilla

Mar 2, 2012

After successfully restoring the Windows7 image from partition 2 (/dev/sda2) to partition 1 (/dev/sda1) using Clonezilla, Windows7 is no longer able to boot and displays the following error messages:

Quote: Windows Boot Manager

Windows failed to start. A recent hardware or software change might be the cause.

[...] Info: The boot selection failed because a required device is inaccessible To solve this particular issue, I rebooted with the Windows7 DVD and hit Repair... which didn't work. But even if it did, I can't do this every time I restore an image to test. Note that I used the same laptop to save and restore the partition, so it's not HAL-related.

Here's what the Repair screen says (poor man's screenshots): Attachment 201071 Does someone know what can be the cause for this error, and what can be done before saving and/or restoring an image with Clonezilla?

View 1 Replies View Related

BSOD After Reformat For An Hour After Booting?

Jan 11, 2012

ive been having these BSOD problems for a couple weeks.. they seem to occur only when i start my computer in the morning and do it a lot for the first hour or so, then seem to quit for the rest of the day.. ive changed all drivers and completely reformatted and reinstalled windows too... no luck?

View 9 Replies View Related

BSOD After Booting Up Toshiba Laptop?

Aug 17, 2012

i have my old toshiba laptop satellite L745 . windows 7 ultimate(x86) Quad core with 4g ram and AMD radeon graphic cards. Recently I left my laptop untouched for a week because of our school exams. After finishing our exams I rushed going home to play with my laptop but when i try to open it , it hangs up on "starting windows screen" i try waiting for it in a few minute but that screen suddenly shows a BSOD error then my laptop reboot showing me the "Windows Error Recovery screen" with 2 options 1. Launch Start up Repair and 2. Start Windows Normally . I try choosing the 1st one (launch Start up repair) But after loading windows files it just show a plain Black screen with a mouse cursor.

View 1 Replies View Related

BSOD On Windows 7 Booting From Disk

Sep 14, 2012

[code] When I boot from it after the "Starting Windows" Screen I get BSOD and it says "PAGE_FAULT_IN_NONPAGED_AREA".This is what I thought was important from the BSOD all the middle text says is disable BIOS memory options such as caching or shadowing, and I have no idea how to do that and no idea if that would even fix this. Can this be caused from a faulty hard drive or is this a problem with the install disk itself.

View 21 Replies View Related

BSOD When Booting Windows / Almost Every Cold Boot

Jan 24, 2012

i got a 3 years old machine and all was working great,but now ( this month) i have multiple BSOD . i have recently replace my power supply for a 650 w it worked until i had those BSOD but now only on cold boot*recently reinstall win 7 64 bit home premium to see if it will worked, but no luck. [code]

View 9 Replies View Related

BSOD When Booting Windows - Huge Dmp File

Apr 20, 2012

After a bsod which I did not have the chance to see or read which happened at a random time (or so my friend says) when trying to boot to windows right after the windows logo comes up, a bsod pops up and the computer restarts. Then you get a choice to either enter windows repair or start windows normally. Start windows normally obviously returns the same result.

If I choose windows repair it fixes nothing and I end up in a loop unable to start windows. I tried these instructions here Startup Repair Infinite Loop Recovery with no success so I copied the dmp files from command line in windows repair to a usb stick and it�s 344MB! Should I upload to some host and post here or is there�s something wrong, Ive never seen a dmp this big.

View 8 Replies View Related

BSOD When PC Booting After Recent Upgrade Of Motherboard And CPU

Apr 24, 2012

I upgraded my pc components and now it will not start at all. As far as I can see all the bios settings are correct. On first start up a message come up first saying no disks found, then when I click onto the bios menu i have AHCI mode enabled and it detects SSD and CD drive absolutely fine. First I tried booting from original SSD with windows 7 already installed. Kept getting BSOD every time I get to windows loading screen.

Then after reading on forums people were re-installing windows back on to the SSD, but when trying to boot from the cd drive(yes its a bootable disc) nothing happens and it just goes to the windows repair screen then does nothing after attempting to repair. i have tried removing the SSD so only the cd drive is visible but then it comes up with the message "reboot and select proper boot device or insert boot media in selected boot device and press any key"

I have removed graphics card and tried on board graphics.
I have tried barebones.
I have tried new cables.
I have cleared Cmos + update

My Components:
Mobo: AsRock Z68 Extreme4 Gen3 (NEW)
CPU: intel core i3 processor LGA1155 (NEW)
Memory: Corsair Dominator 4GB 133mhz (TW3X4G1333C9D) (OLD)
PSU: Hyper 630w (OLD)
SSD: ocz sata 2.0 120gb (OLD) 1month old
Graphics Card: EVGA GeForce GTX 460 (OLD) 1month old
Cooler: Corsair H80 (NEW)
Case: Coolermaster 690II advanced nVidia edition (NEW)

All the old components were working previously.

View 2 Replies View Related

Boot Selection Required Device Is Inaccessible 0xc0000225

Jul 31, 2011

I'm having this error for a while now. this: 0xc0000225 Boot selection required device is inaccessible What happened before this is just a forced shut down because the computer is lagging. After that, this error in now showing up. I have a recovery disk but I can't manage to open it up, cause I dont know this stuffs

View 3 Replies View Related

Computer Not Booting / Freezing During Games / BSOD Not Shutting Down

Jun 1, 2012

Recently, my computer has been behaving quite oddly. It hasn't been booting up, but hasnt given any error messages. When I try to boot, it will open up to a black screen where the Starting Windows stuff is supposed to appear, but nothing will happen. I'll restart it a bunch of times, and eventually I'll get one where the words Starting Windows are there, but still nothing happens. If it offers me the option to load the repair program, it will open the screen that says windows is loading the files with the loading bar at the bottom, but nothing will load. It takes anywhere from 10 to 30 restarts before i'll seemingly just get lucky and it will turn on.Also, I've been freezing lately while playing BF3. My video card drivers are up to date, along with the other main drivers. Sometimes, I'll get a BSOD if I wait long enough, but it doesnt ususally happen. Also, when starting, sometimes when it says on the boot screen "Verifying DMI pool data", nothing will happen, and then it will suddenly say: Disk read error, press cntrl + alt + delete to restart.This leads me to believe that it's a disk error, which explains a lot of the symptoms i've been having lately, but I just dont know where to start the diagnosis.

View 7 Replies View Related

BSOD When Booting From CD - Page Fault In Nonpaged Area

Jun 30, 2012

HP Pavilion a4316f-b, Home Premium, 64-bit

The PC was displaying symptons of page hijacking, so I ran MalwareBytes and got rid of 17 objects. Did not make a difference, so I ran TDSSKiller. It found 1 bit of malware but the hijacking persisted. I downloaded ComboFix and ran it in Safe Mode. It gave me some sort of error that was only visible for a split second before it disappeared, leaving only the initial small blue CF box, which stopped functioning, and I noticed that the CF task was gone. This happened 3 times in a row.

I then tried a system restore to about 3 weeks ago. It probably sat on the 'restoring files' screen for a half hour before finally saying 'Shutting Down'. After 45 minutes of (not) shutting down I pressed the power button and turned it off.

A restart brought me to the Windows Error Recovery Screen where I am presented with but 2 choices - Launch Startup Repair or Start Windows Normally.

The 'repair' option takes me to a Windows Boot Manager screen which prompts me to insert the install disk and reboot, indicating that The boot selection failed because a required device is inaccessible

So I use the CD. When booting from that CD I can see it loading files, then it says Starting Windows, the initial blue sky screen displays for a few seconds - then the BSOD: PAGE_FAULT_IN_NONPAGED_AREA with an 0x50 code. This always happens with this disk.

A different Windows 7 CD has given me the same start up to the blue sky, but with 3 different BSODs. One had Bad Pool Header and the other said An attempt was made to write to read-only memory and the 3rd had the same PAGE_FAULT_IN_NONPAGED_AREA

Only 3 of the 4 choices presented to me at HP opening boot screen seemed to work when I first started this awful task. F11 for Recovery did nothing. I DID use f9-Diagnostics and it passed all the tests. Now, sadly, the only option that works is ESC to change the boot order.

View 9 Replies View Related

Error While Booting To Windows 7?

May 8, 2012

i have a problem during installation of windows 7 via usb flash ,i started setup it was fine until the step of selecting the drive to install the windows ,i got this message "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk"i searched a lot to find a solution but i got no answer ,also i knew that there are some steps should be checked first in bios menu but it seems that my bios menu has some difference because of my old pc

View 5 Replies View Related

Error On Booting Fro Windows 7 Dvd?

Jan 19, 2013

just changed my motherboard because previous one was damaged, as well as ram and cpu. what y computer now has is asrock pro3-m mobo, inter i5 3450 cpu, 4gb ddr3 ram 1600 ghz kingston (compatible to the mobo according to asrock website). HD is 500 gb sata 2 formated. I try to boot from dvd to install the windows but i get pxe-e53 error: no boot filename received. dvd drive is first priority on boot order btw. I know that it tries to boot from lan after skipping all other steps without success but why? dvd drive is fine. it boots the windows xp cd. any ideas? after the pxe-e53 error it shows me windows boot manager with status 0x0000225. i run memtest86+ to check possible problem in ram but showed me no errors.

View 5 Replies View Related

Booting Message Error

Mar 5, 2010

i make drive c compressed, then after restarting not able to booting and a message compressed drive press control alt delete to restart

View 1 Replies View Related

Connection Error After Dual Booting?

Oct 24, 2012

I am not 100% sure if i should be posting this here or not but ill just continue. Okay so i have a Dell infinion 15r-n5110 laptop. a couple days ago i dual booted up with fedora 17. i self partition the 1TB hd. i left the partition for windows 7 unscathed. ever since then windows 7 has not been able to ping my home broadband connection. i have personaly changed the DNS server to serveral addresses i have found on dozens of other forums but nothing helps me. i cant access a router to easy but i did at work finally today and even with the cable plugged in it will not ping in windows 7. however both wifi card and the wired connection work just fine in fedora. i am thinking its something to do with the boot processes not initalizing. i have downloaded and reinstalled the drivers off the intel website for the wifi netword device (Intel Corporation Centrino Wireless-N 1030) and it still will not let me ping, i even went as so far as to turn off my firewall thinking it was a security issue and tryed to ping. still no luck. im hoping i have provided enough details and trial and errors for someone out there to give me something useful.

View 2 Replies View Related

Run DLL Error Pops Up While Booting Windows 7?

Jan 9, 2012

A day ago I started getting a DLL error after booting up . Error is " There was a problem starting msikrl32.dll. The specified module could not be found ". I googled a lot and could not find anything related to this error.I am using ESET antivirus 5.0 and scan results says everything fine.

View 7 Replies View Related

Resolution Error Booting Second Machine

Oct 28, 2009

OK after a few boots and trying different methods I can clearly now see an issue that was not present in XP or Vista.

I have two machines linked using a basic KVM. What happens is that if I am not monitoring the bootup of a machine then the resolution at boot up changes.

On one machine I have two GPU and run four monitors. If I boot this machine while switched over to the other machine then all the icons from the monitor that I use to view the other machine are moved to my main monitor in the set. If I decide to boot the second machine, which only uses the one monitor, while looking at the other machine then when I switch over the resolution has been reduced to the windows setup default.

I have booted both machines and monitored them doing so and all is fine. But when I am not monitoring them boot then I have this issue with the monitor not being recognised, even though XP and Vista was able to do so at boot time.

Does anyone have any ideas on how the monitor configuration can be saves and read during boot if the monitors are not currently active on the booting machine?

View 0 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved