BSOD After Booting Up Toshiba Laptop?
Aug 17, 2012
i have my old toshiba laptop satellite L745 . windows 7 ultimate(x86) Quad core with 4g ram and AMD radeon graphic cards. Recently I left my laptop untouched for a week because of our school exams. After finishing our exams I rushed going home to play with my laptop but when i try to open it , it hangs up on "starting windows screen" i try waiting for it in a few minute but that screen suddenly shows a BSOD error then my laptop reboot showing me the "Windows Error Recovery screen" with 2 options 1. Launch Start up Repair and 2. Start Windows Normally . I try choosing the 1st one (launch Start up repair) But after loading windows files it just show a plain Black screen with a mouse cursor.
View 1 Replies
ADVERTISEMENT
Oct 8, 2012
I am trying to fix a Toshiba laptop that failed during a factory restore by the customer and would not complete the restore. I have since tested the ram and hard drive and they are ok. I replaced the faulty cd drive too. The factory restore worked this time, but I keep getting a blue screen during the 'Checking System Performance' stage of the recovery. Windows is installed and all drivers are in as I can see in safe mode but if I try to boot to normal Windows I get the BSOD boot loop and don't know how to bypass it. I have attached a html file of the crash reports from BlueScreenView. The problem appears to be with the ATI display driver, but I am not sure how to update it in safe mode.
View 1 Replies
View Related
Nov 19, 2012
Toshiba laptop showing a status 0xc00000e9. How do I bypass it?
View 2 Replies
View Related
Aug 26, 2012
I thought it might be due to the BIOS, so I flashed the new BIOS, still nothing. Then I contemplated heat being the problem (as sometimes it crashes after it's been on for quite some time; 1 day or more), so I removed the battery and propped up the rear of the laptop to get more.Now, I'm wondering if it's the motherboard itself that is overheating causing the laptop to crash after being on for an excessive amount of time.When the laptop boots after being off for a day or so, it will boot up initially. However, after I restart it immediately after booting into the OS (Windows 7), it will crash even before getting to the Windows 7 Logo.I'll have to unplug the power cord, remove the battery (when it's installed) and hold down the power button for 30 seconds each and every time I need it to reboot, and even sometimes that doesn't work.Recently, I did a fresh install of Windows 7 32 bit.About a year and a half ago I put in more RAM (the specific kind and not too much where the computer couldn't read it) which I bought from NewEgg. I have a total of 3 GB.The screen is not black when the laptop starts, so I know it's not the famed video driver that gets out of date. It's something else; either software or hardware component(s) that's not allowing the computer to boot. [code] Eventually, I got the computer to start up and run long enough to do some much needed critical updates from Windows Update, but I'm not sure how long it will last running. The OS Version should be the latest version as of now.
View 1 Replies
View Related
Sep 2, 2012
I've got a new copy of windows 7 (32 bit version) I have got 4 GB ram only 3,25 in use (like I had on the XP version, running on the same PC) and after I boot up the PC I just look at the desktop, play with some random games, create and delete folders, do some little stress to the RAM or sometimes just doing nothing. The only boot that works is safe mode and its variants. Things that I've done in the past 7 days:
- I checked RAM integrity - no errors
- Everything is up to date (drivers, everything) - it BSOD'ed even with a fresh copy of Windows 7
- I use wireless if that is a problem, found some errors about it and will post them after this list
- Enabled services and disabled them VIA msconfig (toying around I found out that it WONT CRASH with any internet service on normal mode)
- I checked Windows 7 compatibility and it's 100% compatible
- Tried to update BIOS but I don't think it will solve anything anyways
- Used dozens of registry cleaners (CCleaner and lots; lots more) - still nothing
- Put a second HDD on my machine with Windows 7 same version, it still crashed, but on the other machine the second HDD works great.
Event 7001: The Computer Browser service depends on the Server service which failed to start because of the error: "The dependency service or group failed to start. Event 10005: DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-505054503030}
View 3 Replies
View Related
Dec 11, 2011
im having a BSOD problem when booting into Windows. Only sometimes. Need to know if its a MB issue so i can submit a RMA?
View 7 Replies
View Related
Feb 19, 2012
I just bought a new motherboard and CPU. They are an ASUS P8Z68-V LX with an i5-2500k processor. It goes through the boot cycle all the way up until it says "Starting Windows", then it pauses and flashes BSOD for a split second.
View 3 Replies
View Related
Sep 23, 2012
I recently started having problems where my computer will randomly BSOD. After that i get an error saying no boot manager can found and I just have to manually restart my computer. Ill attach the diagnostics .zip
View 7 Replies
View Related
Oct 12, 2012
My laptop runs fine until I try to boot up any game. This makes me believe that the problem lies with my gpu.
My gpu is nvidia geforce gt 540m. The main BSOD error says: Attempt to reset the display driver and recover timeout failed.
View 1 Replies
View Related
Jan 11, 2012
ive been having these BSOD problems for a couple weeks.. they seem to occur only when i start my computer in the morning and do it a lot for the first hour or so, then seem to quit for the rest of the day.. ive changed all drivers and completely reformatted and reinstalled windows too... no luck?
View 9 Replies
View Related
Mar 12, 2012
I got a dual boot with GRUB2, Arch Linux + Windows 7 Pro x64.Always used it with no problems, and now the Windows loader can't work.I only managed to read the status value, 0xC0000225, and something like "boot manager generic failure", "a required device is inaccessible".I tried using the repair function from my full retail dvd, but it didn't work as well. I think it's because it acted on the windows partition, while the windows boot is stored in another partition of about 100mb, wich was created automatically during the dvd installation.So I guess the solution would be giving to the repair function the right drivers to let it "see" the boot partition, but how?
My system specs:
Windows 7 Pro x64
Full Retail
The machine is a laptop, 1.5 years old
OS installed a few months ago
View 3 Replies
View Related
Sep 14, 2012
[code] When I boot from it after the "Starting Windows" Screen I get BSOD and it says "PAGE_FAULT_IN_NONPAGED_AREA".This is what I thought was important from the BSOD all the middle text says is disable BIOS memory options such as caching or shadowing, and I have no idea how to do that and no idea if that would even fix this. Can this be caused from a faulty hard drive or is this a problem with the install disk itself.
View 21 Replies
View Related
Jan 24, 2012
i got a 3 years old machine and all was working great,but now ( this month) i have multiple BSOD . i have recently replace my power supply for a 650 w it worked until i had those BSOD but now only on cold boot*recently reinstall win 7 64 bit home premium to see if it will worked, but no luck. [code]
View 9 Replies
View Related
Apr 20, 2012
After a bsod which I did not have the chance to see or read which happened at a random time (or so my friend says) when trying to boot to windows right after the windows logo comes up, a bsod pops up and the computer restarts. Then you get a choice to either enter windows repair or start windows normally. Start windows normally obviously returns the same result.
If I choose windows repair it fixes nothing and I end up in a loop unable to start windows. I tried these instructions here Startup Repair Infinite Loop Recovery with no success so I copied the dmp files from command line in windows repair to a usb stick and it�s 344MB! Should I upload to some host and post here or is there�s something wrong, Ive never seen a dmp this big.
View 8 Replies
View Related
Jan 4, 2013
When I try to boot my windows 7, it fails and a blue screen appears, stating that the error message "Stop: 0xed". I try to repair windows, but it fails.So, I reinstall my windows 7. And it works fine in several days, but the blue screen occurs again. I have encountered this situation several times. Reinstall, blue screen, reinstall.I found that before the blue screen occurs, my computer shut down normally.
View 5 Replies
View Related
Apr 24, 2012
I upgraded my pc components and now it will not start at all. As far as I can see all the bios settings are correct. On first start up a message come up first saying no disks found, then when I click onto the bios menu i have AHCI mode enabled and it detects SSD and CD drive absolutely fine. First I tried booting from original SSD with windows 7 already installed. Kept getting BSOD every time I get to windows loading screen.
Then after reading on forums people were re-installing windows back on to the SSD, but when trying to boot from the cd drive(yes its a bootable disc) nothing happens and it just goes to the windows repair screen then does nothing after attempting to repair. i have tried removing the SSD so only the cd drive is visible but then it comes up with the message "reboot and select proper boot device or insert boot media in selected boot device and press any key"
I have removed graphics card and tried on board graphics.
I have tried barebones.
I have tried new cables.
I have cleared Cmos + update
My Components:
Mobo: AsRock Z68 Extreme4 Gen3 (NEW)
CPU: intel core i3 processor LGA1155 (NEW)
Memory: Corsair Dominator 4GB 133mhz (TW3X4G1333C9D) (OLD)
PSU: Hyper 630w (OLD)
SSD: ocz sata 2.0 120gb (OLD) 1month old
Graphics Card: EVGA GeForce GTX 460 (OLD) 1month old
Cooler: Corsair H80 (NEW)
Case: Coolermaster 690II advanced nVidia edition (NEW)
All the old components were working previously.
View 2 Replies
View Related
Jun 1, 2012
Recently, my computer has been behaving quite oddly. It hasn't been booting up, but hasnt given any error messages. When I try to boot, it will open up to a black screen where the Starting Windows stuff is supposed to appear, but nothing will happen. I'll restart it a bunch of times, and eventually I'll get one where the words Starting Windows are there, but still nothing happens. If it offers me the option to load the repair program, it will open the screen that says windows is loading the files with the loading bar at the bottom, but nothing will load. It takes anywhere from 10 to 30 restarts before i'll seemingly just get lucky and it will turn on.Also, I've been freezing lately while playing BF3. My video card drivers are up to date, along with the other main drivers. Sometimes, I'll get a BSOD if I wait long enough, but it doesnt ususally happen. Also, when starting, sometimes when it says on the boot screen "Verifying DMI pool data", nothing will happen, and then it will suddenly say: Disk read error, press cntrl + alt + delete to restart.This leads me to believe that it's a disk error, which explains a lot of the symptoms i've been having lately, but I just dont know where to start the diagnosis.
View 7 Replies
View Related
Jun 30, 2012
HP Pavilion a4316f-b, Home Premium, 64-bit
The PC was displaying symptons of page hijacking, so I ran MalwareBytes and got rid of 17 objects. Did not make a difference, so I ran TDSSKiller. It found 1 bit of malware but the hijacking persisted. I downloaded ComboFix and ran it in Safe Mode. It gave me some sort of error that was only visible for a split second before it disappeared, leaving only the initial small blue CF box, which stopped functioning, and I noticed that the CF task was gone. This happened 3 times in a row.
I then tried a system restore to about 3 weeks ago. It probably sat on the 'restoring files' screen for a half hour before finally saying 'Shutting Down'. After 45 minutes of (not) shutting down I pressed the power button and turned it off.
A restart brought me to the Windows Error Recovery Screen where I am presented with but 2 choices - Launch Startup Repair or Start Windows Normally.
The 'repair' option takes me to a Windows Boot Manager screen which prompts me to insert the install disk and reboot, indicating that The boot selection failed because a required device is inaccessible
So I use the CD. When booting from that CD I can see it loading files, then it says Starting Windows, the initial blue sky screen displays for a few seconds - then the BSOD: PAGE_FAULT_IN_NONPAGED_AREA with an 0x50 code. This always happens with this disk.
A different Windows 7 CD has given me the same start up to the blue sky, but with 3 different BSODs. One had Bad Pool Header and the other said An attempt was made to write to read-only memory and the 3rd had the same PAGE_FAULT_IN_NONPAGED_AREA
Only 3 of the 4 choices presented to me at HP opening boot screen seemed to work when I first started this awful task. F11 for Recovery did nothing. I DID use f9-Diagnostics and it passed all the tests. Now, sadly, the only option that works is ESC to change the boot order.
View 9 Replies
View Related
Apr 29, 2012
After installing updates on my Toshiba Satellite L305 I turned my computer on and it ran very slowly for about 2-3 minutes until the screen just went black. After a few minutes and attempts at ctrl-alt-delete I turned my computer off and restarted and a screen pops up asking if I want to Launch Startup Repair (recommended) or Start Windows Normally. If I choose to launch the start up repair it says windows is loading files... and a loading bar quickly fills and the screen goes black again. If I choose to start normally it just goes straight to the black screen.
View 6 Replies
View Related
Sep 19, 2011
I have a gateway t-series laptop that will not boot. The battery works fine and the computer turns on (power light comes on and fan spins), but the screen stays completely black. There are some media buttons near the screen that are touch sensitive that should light up when touched, but they don't. I tried resetting the RAM once and that worked as it turned on booted and ran fine, but it quickly over-heated and turned off abruptly. I let it cool and the whole not booting problem came back, and now the resetting-the-RAM trick doesn't work any more. I would appreciate any help as I am starting school soon and need a computer.
View 3 Replies
View Related
Nov 22, 2011
Compaq Presario F700 laptop not turning on or booting up. No lights, no sound, no luxuries. Thinking it was the power adapter, purchased repllacement. Removed HD, Removed RAM on stick at a time. Held down power button for 30 seconds after removing all power sources. Checked Google only to find out that this a common problem with this model of laptop. I apologize for not having any other specs for this model of laptop as It will not turn on. This is one of my clients laptop and would like to get it going. Have a feeling it is a MOB issue or graphics card.
View 3 Replies
View Related
Jul 13, 2012
A failing laptop with Windows 7 installed on the internal HDD A computer with Ubuntu currently installed on the internal HDD (it's free!) An enclosure and USB cable for the laptop hard drive
What I'm trying/want to do:
Put the laptop HDD in the enclosure, connect via USB to the desktop, boot Windows 7 on the desktop from the enclosure and use all the currently installed programs on the laptop HDD with their current settings.
What happens:
With the HDD in the enclosure and connected to the desktop, I power up the desktop. Going straight to the boot menu, I select the new option which is labelled something like "USB-HDD0". "Starting Windows" appears as expected, followed after a bit by the logo, but then the desktop restarts before reaching anything the blue patterned default screen before login options.
Extra info:
When I replace the laptop HDD back into the laptop and boot, everything still works fine. Windows Startup Repair cannot find a problem (big surprise!) If possible I'd like to avoid the hassle of clean installs etc.
View 1 Replies
View Related
Sep 23, 2011
my laptop is very slow during booting. what are the causes and what is the way out?
View 2 Replies
View Related
Oct 21, 2011
laptop not booting on dvd or pen drive. i have tried a lot. my dvd drive is ok but not reading windows cd or any bootable pendrive
View 2 Replies
View Related
Jun 20, 2011
I can't seem to boot my Gateway laptop with Windows 7 installed. I took a video of what happens when I try to boot it.
The laptop is a Gateway PEW91, stats here: [URL] And this is a video I just uploaded showing what happens when I try booting it up:
View 1 Replies
View Related
Aug 7, 2012
I have a Toshiba laptop with Windows 7 and I am using Kaspersky for protection. Last night it gave me an error (I can't remember what it said) and then when I went to reboot the computer it got as far as showing the toolbar at the bottom with the start button. Once it reached that state it stopped and just showed the hourglass. Does anyone have any suggestions or ideas? Or, is the computer dead and I need to try to find someplace that can fix the hard drive?
View 9 Replies
View Related
Jan 6, 2011
The boot time is slow. Ive used an antivirus program, as well as malware etc. and its no faster. Does data have any impact in reducing speed?
View 2 Replies
View Related
Jun 10, 2012
I cant boot my laptop even in safe mode.
View 1 Replies
View Related
Jun 20, 2012
I tried to run Mem86 and Windows Memory Diagnostic, but the BIOS doesn't allow booting from a USB drive. Also, Windows 7 doesn't seem to recognize the .iso file on the DVD even when I turned off "boot from hard drive" to force it to boot from the DVD drive.
View 9 Replies
View Related
Sep 4, 2012
Whenever I turn on my Dell laptop, it goes through the Dell, Microsoft...Etc. and it always shows a black screen and a little white dash in the upper left hand corner. If it ever does start to load, it always stops at 962 of sixty-seven thousand, five hundred and something and it starts flickering and stays there and does not move. I tried doing the Thing where the computer tries to fix the problem, but when it's done, it always tells me to turn off the computer and turn it on again and it always does the 962 thing.
View 1 Replies
View Related
Jan 4, 2013
My laptop is not booting up. i tried reinstalling it, but still even with a boot able disk, the system is not loading up. I even tried reinstalling from the USB drive. still I the system isn't responding.
View 7 Replies
View Related
