I just bought a new motherboard and CPU. They are an ASUS P8Z68-V LX with an i5-2500k processor. It goes through the boot cycle all the way up until it says "Starting Windows", then it pauses and flashes BSOD for a split second.
View 3 Replies
I upgraded my pc components and now it will not start at all. As far as I can see all the bios settings are correct. On first start up a message come up first saying no disks found, then when I click onto the bios menu i have AHCI mode enabled and it detects SSD and CD drive absolutely fine. First I tried booting from original SSD with windows 7 already installed. Kept getting BSOD every time I get to windows loading screen.
Then after reading on forums people were re-installing windows back on to the SSD, but when trying to boot from the cd drive(yes its a bootable disc) nothing happens and it just goes to the windows repair screen then does nothing after attempting to repair. i have tried removing the SSD so only the cd drive is visible but then it comes up with the message "reboot and select proper boot device or insert boot media in selected boot device and press any key"
I have removed graphics card and tried on board graphics.
I have tried barebones.
I have tried new cables.
I have cleared Cmos + update
My Components:
Mobo: AsRock Z68 Extreme4 Gen3 (NEW)
CPU: intel core i3 processor LGA1155 (NEW)
Memory: Corsair Dominator 4GB 133mhz (TW3X4G1333C9D) (OLD)
PSU: Hyper 630w (OLD)
SSD: ocz sata 2.0 120gb (OLD) 1month old
Graphics Card: EVGA GeForce GTX 460 (OLD) 1month old
Cooler: Corsair H80 (NEW)
Case: Coolermaster 690II advanced nVidia edition (NEW)
All the old components were working previously.
My HP Elite 8100 PC was giving 5 beeps upon powering up. I suspected the motherboard was at fault so called HP's technical support and they confirmed this. As my product is under warranty they sent me a new motherboard. I fitted it and the PC turned on ok and I saved the new config but it does not boot Windows. It gives me the options to run 'Startup Recovery' which does nothing at all and 'Start Windows Normally' which just loops back to this option screen. I called HP back and they say I shouldn't have had to have done anything else to enable the new motherboard to work so sent me another one and the same thing has happened.
View 6 Replies View RelatedI've got a new copy of windows 7 (32 bit version) I have got 4 GB ram only 3,25 in use (like I had on the XP version, running on the same PC) and after I boot up the PC I just look at the desktop, play with some random games, create and delete folders, do some little stress to the RAM or sometimes just doing nothing. The only boot that works is safe mode and its variants. Things that I've done in the past 7 days:
- I checked RAM integrity - no errors
- Everything is up to date (drivers, everything) - it BSOD'ed even with a fresh copy of Windows 7
- I use wireless if that is a problem, found some errors about it and will post them after this list
- Enabled services and disabled them VIA msconfig (toying around I found out that it WONT CRASH with any internet service on normal mode)
- I checked Windows 7 compatibility and it's 100% compatible
- Tried to update BIOS but I don't think it will solve anything anyways
- Used dozens of registry cleaners (CCleaner and lots; lots more) - still nothing
- Put a second HDD on my machine with Windows 7 same version, it still crashed, but on the other machine the second HDD works great.
Event 7001: The Computer Browser service depends on the Server service which failed to start because of the error: "The dependency service or group failed to start. Event 10005: DCOM got error "1084" attempting to start the service WSearch with arguments "" in order to run the server: {9E175B6D-F52A-11D8-B9A5-505054503030}
im having a BSOD problem when booting into Windows. Only sometimes. Need to know if its a MB issue so i can submit a RMA?
View 7 Replies View RelatedI recently started having problems where my computer will randomly BSOD. After that i get an error saying no boot manager can found and I just have to manually restart my computer. Ill attach the diagnostics .zip
View 7 Replies View RelatedMy laptop runs fine until I try to boot up any game. This makes me believe that the problem lies with my gpu.
My gpu is nvidia geforce gt 540m. The main BSOD error says: Attempt to reset the display driver and recover timeout failed.
ive been having these BSOD problems for a couple weeks.. they seem to occur only when i start my computer in the morning and do it a lot for the first hour or so, then seem to quit for the rest of the day.. ive changed all drivers and completely reformatted and reinstalled windows too... no luck?
View 9 Replies View RelatedI got a dual boot with GRUB2, Arch Linux + Windows 7 Pro x64.Always used it with no problems, and now the Windows loader can't work.I only managed to read the status value, 0xC0000225, and something like "boot manager generic failure", "a required device is inaccessible".I tried using the repair function from my full retail dvd, but it didn't work as well. I think it's because it acted on the windows partition, while the windows boot is stored in another partition of about 100mb, wich was created automatically during the dvd installation.So I guess the solution would be giving to the repair function the right drivers to let it "see" the boot partition, but how?
My system specs:
Windows 7 Pro x64
Full Retail
The machine is a laptop, 1.5 years old
OS installed a few months ago
i have my old toshiba laptop satellite L745 . windows 7 ultimate(x86) Quad core with 4g ram and AMD radeon graphic cards. Recently I left my laptop untouched for a week because of our school exams. After finishing our exams I rushed going home to play with my laptop but when i try to open it , it hangs up on "starting windows screen" i try waiting for it in a few minute but that screen suddenly shows a BSOD error then my laptop reboot showing me the "Windows Error Recovery screen" with 2 options 1. Launch Start up Repair and 2. Start Windows Normally . I try choosing the 1st one (launch Start up repair) But after loading windows files it just show a plain Black screen with a mouse cursor.
View 1 Replies View Related[code] When I boot from it after the "Starting Windows" Screen I get BSOD and it says "PAGE_FAULT_IN_NONPAGED_AREA".This is what I thought was important from the BSOD all the middle text says is disable BIOS memory options such as caching or shadowing, and I have no idea how to do that and no idea if that would even fix this. Can this be caused from a faulty hard drive or is this a problem with the install disk itself.
View 21 Replies View Relatedi got a 3 years old machine and all was working great,but now ( this month) i have multiple BSOD . i have recently replace my power supply for a 650 w it worked until i had those BSOD but now only on cold boot*recently reinstall win 7 64 bit home premium to see if it will worked, but no luck. [code]
View 9 Replies View RelatedAfter a bsod which I did not have the chance to see or read which happened at a random time (or so my friend says) when trying to boot to windows right after the windows logo comes up, a bsod pops up and the computer restarts. Then you get a choice to either enter windows repair or start windows normally. Start windows normally obviously returns the same result.
If I choose windows repair it fixes nothing and I end up in a loop unable to start windows. I tried these instructions here Startup Repair Infinite Loop Recovery with no success so I copied the dmp files from command line in windows repair to a usb stick and it�s 344MB! Should I upload to some host and post here or is there�s something wrong, Ive never seen a dmp this big.
When I try to boot my windows 7, it fails and a blue screen appears, stating that the error message "Stop: 0xed". I try to repair windows, but it fails.So, I reinstall my windows 7. And it works fine in several days, but the blue screen occurs again. I have encountered this situation several times. Reinstall, blue screen, reinstall.I found that before the blue screen occurs, my computer shut down normally.
View 5 Replies View RelatedRecently, my computer has been behaving quite oddly. It hasn't been booting up, but hasnt given any error messages. When I try to boot, it will open up to a black screen where the Starting Windows stuff is supposed to appear, but nothing will happen. I'll restart it a bunch of times, and eventually I'll get one where the words Starting Windows are there, but still nothing happens. If it offers me the option to load the repair program, it will open the screen that says windows is loading the files with the loading bar at the bottom, but nothing will load. It takes anywhere from 10 to 30 restarts before i'll seemingly just get lucky and it will turn on.Also, I've been freezing lately while playing BF3. My video card drivers are up to date, along with the other main drivers. Sometimes, I'll get a BSOD if I wait long enough, but it doesnt ususally happen. Also, when starting, sometimes when it says on the boot screen "Verifying DMI pool data", nothing will happen, and then it will suddenly say: Disk read error, press cntrl + alt + delete to restart.This leads me to believe that it's a disk error, which explains a lot of the symptoms i've been having lately, but I just dont know where to start the diagnosis.
View 7 Replies View RelatedHP Pavilion a4316f-b, Home Premium, 64-bit
The PC was displaying symptons of page hijacking, so I ran MalwareBytes and got rid of 17 objects. Did not make a difference, so I ran TDSSKiller. It found 1 bit of malware but the hijacking persisted. I downloaded ComboFix and ran it in Safe Mode. It gave me some sort of error that was only visible for a split second before it disappeared, leaving only the initial small blue CF box, which stopped functioning, and I noticed that the CF task was gone. This happened 3 times in a row.
I then tried a system restore to about 3 weeks ago. It probably sat on the 'restoring files' screen for a half hour before finally saying 'Shutting Down'. After 45 minutes of (not) shutting down I pressed the power button and turned it off.
A restart brought me to the Windows Error Recovery Screen where I am presented with but 2 choices - Launch Startup Repair or Start Windows Normally.
The 'repair' option takes me to a Windows Boot Manager screen which prompts me to insert the install disk and reboot, indicating that The boot selection failed because a required device is inaccessible
So I use the CD. When booting from that CD I can see it loading files, then it says Starting Windows, the initial blue sky screen displays for a few seconds - then the BSOD: PAGE_FAULT_IN_NONPAGED_AREA with an 0x50 code. This always happens with this disk.
A different Windows 7 CD has given me the same start up to the blue sky, but with 3 different BSODs. One had Bad Pool Header and the other said An attempt was made to write to read-only memory and the 3rd had the same PAGE_FAULT_IN_NONPAGED_AREA
Only 3 of the 4 choices presented to me at HP opening boot screen seemed to work when I first started this awful task. F11 for Recovery did nothing. I DID use f9-Diagnostics and it passed all the tests. Now, sadly, the only option that works is ESC to change the boot order.
915 motherboard intel support chipset motherboard sound, vga, usb drivers download
View 1 Replies View RelatedI have another laptop and its a HP 2230s. I originally installed Windows 7 professional 64bit. But I have swapped the ram into my Lenovo ThinkPad. So the HP now has 2GB. I created a new partition and installed Vista Business 32bit on it. When I started the install windows .exe program in Windows 7, everything went well until it rebooted. When I rebooted, windows said something like:
Windows Boot manager:
The system cannot boot because of a recent change to files/hardware. (Something like that). Insert your windows disk.
So I just rebooted my laptop with the vista disk inside and installed. After, when everything was working, I wanted to go to the Windows 7 partition to un-install programs and copy some files over to the vista partition, the laptop just booted into vista.
I downloaded the easy BCD editior and visual BCD editor. (in the vista partition), I clicked the auto fix in visual BCD editor. It detected my windows installations. At the boot screen, I can select either Windows 7 or Vista. But when I select 7, the same error message appears.
Then I rebooted my laptop with a USB containing the Windows 7 (64bit) recovery tools. After, I don't have the message again. But when it goes to the starting windows animation, it stops halfway and it gets a BSOD. I tried debugging mode, it worked.
I found out that the larger partition, (Windows 7) is the C: drive. But when I boot into the smaller partition, (Windows Vista), the drive is also C:!. So I don't know what I could do.
I insert the windows 7 disk and repaired my installation, it just boots into windows 7. But when I insert the Vista disk and repaired my installation, it just boots into Vista!
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
Earlier xp but after win7 the booting not show xp at booting time
View 1 Replies View Relatedi just finished my build and i have no idea why i went for a motherboard with 2 slots for ram it can hold up to 16gb but luckly ebuyer sent me out an extra 4gb of kingston hyperx ram so i have 8gb all together but theres a problem theres 4 sticks ! obviously i wouldnt want to send it back so what do ya think either upgrade my motherboard and smash the extra 4 gb in there or keep to my original one i dont have money to blow atall im really struggling if its something that will really make a difference ill go with it if not then ill just keep to my original and when i come to buy a graphics card i will get a 2gb graphics card to help with gaming?
View 3 Replies View RelatedI just bought a new case for my pc (CM Storm Trooper) and in the top front there is 2 USB 2.0 ports and 2 USB 3.0 ports build in (plus some other stuff) so i was wondering if there is a way that i can get the 3.0 ports working on my ASUS M4A77T Motherboard, which i don't think supports USB 3.0? Is there any adapter/PCI Interface that can make these ports useable?
View 2 Replies View RelatedMy motherboard info shows at the image on the bottom and I was wondering if I need to download drivers..
View 1 Replies View Relatedi have recently purchased an HP computer, that had Windows starter edition, i reformated the computer installed windows vista ultimate and then upgraded to windows 7, i have everythimg working fine, i managed to download most of drivers, my main concern is that card reader that i have in my computer doesnt show when i open my computer or computer,
that about normal mode, but the card reader shows in safe mode, thats wierd, and also these are generic drivers from windows 7, as i was unable to locate any drivers for card reader, may be you understand what my concern is, waiting eagerly for a reply. and my motherboard model no is (Foxconn MCP73M01H1).
Cpu i5 or AMD 1090t or whatever. I can pick out a motherboard that will support USB3 and SATA3 and of course I will have the 2 HD for them. I don't know crap about motherboards but when I pick one out to build my new computer what should I be looking at bus speed and so forth because I don't want to pick out a motherboard that will support them but is slow as mud so why bother so I want to do this right and another hundred here or there don't matter but I don't need a dragster just a Corvet. what I might want to take a hard look at on a motherboard?
View 5 Replies View RelatedI have a dell xps one a2420 computer that I am truly not trying to part with as of yet, is the motherdoard upgradeable?
View 2 Replies View Relatedhow to go about moving hard drives to a new mobo. My current setup is running on an LGA 775 socket, and it's got two drives, one of which holds games and the other has Windows 7 ultimate which I installed. I need to know if there would be any issues if I got a better 775 socket motherboard and transferred the hard drives over. Would everything on the secondary drive stay the same as it was and be a simple swap? and would i have to reinstall windows on the primary drive or would I just be able to type in the product key again?
View 9 Replies View RelatedI'm currently running dual monitors on my one graphics card. My motherboard has a HDMI port. Would it be possible to use that HDMI on my motherboard and get a 3rd monitor? I would like to hook it up to my TV just to watch video files off of my computer and maybe Blurays off my Bluray drive.
View 5 Replies View RelatedUntil a couple of weeks ago I was quite happily running my Nvidia 9400 GT GPU with no issues. Windows update wanted to update as it does every now an then and afterwards I get a black screen?? I switched to my on-board graphics everything is fine - I try the 9400 and nothing........ it gets weirder....... couple of days later I turn the computer on again and the 9400 is working again..... does so for a few days then black screen again I've been out today and bought a Nvidia GT 620 and plugged it into the motherboard but even that isn't showing up in device manager
View 2 Replies View RelatedMy PC is not working It turns on for five seconds, turns off for five seconds, then reboots but the screen displays nothing. I have checked the video card on a different PC, checked the HDDs, and the power supply - those are all working fine.I have assumed that the motherboard or CPU have died and need replacing (is there a way to find out for sure?).My main point for this thread: Could anyone please recommend me a really kickass motherboard, CPU, and RAM? I am also hoping to have one dedicated HDD for Mac OSX , so a processor/motherboard that will be compatible with Windows and Mac would be excellent (is this even possible?)have one HDD dedicated Mac OSX so I can use Final Cut Pro and avoid spending $2000+ on a Mac Pro.
I was recommended this processor: Newegg.com - Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost) 4 x 256KB L2 Cache 8MB L3 Cache LGA 1155 95W Quad-Core Desktop Processor BX80623I72600K
Looking for a Micro ATX 775 Motherboard with raid for under $75.00 and at most $100. I just can not seem to find one with raid support.
Needs:
DDR3 Support
1 Pcie x16 lane
1 PCI slot
