Trying To Restore Windows 7 Disk Image Stored On WD Passport Drive
Sep 24, 2012
I have a compac (HP) laptop (CQ61-41us notebook), running WIN7 home premium, 64 bit. Aside from the normal file backup via the western digital software, I have several windows 7 generated iso images of my laptop stored on my external WD drive. Using windows repair disk, my computer does not recognize the external drive to access the disk images. It just asks to insert the last disk into optical drive. My images are on a folder on my external drive. There is no option to navigate to it! This is the first time I've needed to restore an image, and I can't access them! This should be an easy operation that could be started in a few minutes. I have been screwing around with this for more than 24 hours!
View 3 Replies
ADVERTISEMENT
Mar 18, 2012
I had a hard drive fail, and I want to recover my recent backup/image from that failed drive, an image which was created with the Win 7 backup tool found in Control Panel. It's on an external hard drive. I of course want to recover it to a drive known to be good, such as the one that's in my computer now.If I have XP on said drive, can I make a partition and restore the 7 image to that new partition? Or would I not be able/allowed to have two Windows OS-es on the same drive, even on different partitions? It's XP Home and 7 Home Premium x64.
View 4 Replies
View Related
Feb 6, 2013
I am wondering if it is possible to restore a backup disk image taken from a laptop running Windows 7 32-bit to a different laptop running Windows 7 64-bit and I haven't been able to find anything about this. Does anyone know if this is possible? The machine that I need to backup is a Dell XPS M1330 (upgraded to W7 32-bit), and the machine that I would be restoring the image to is a Dell Latitude E5430 (brand new, running W7 64-bit). I found a program called EaseUS Todo Backup, and purchasing the "Workstation" or higher version would include support for a "Restore to dissimilar hardware" feature.
View 7 Replies
View Related
Feb 17, 2011
Tomorrow my new Samsung netbook will be delivered, Windows 7 Starter is preinstalled. I haven't had a netbook before, and I haven't used Windows 7 before.
I'd like to make an image of the HDD immediately after unpacking. I need to play around with Windows 7 and I probably want to remove bloatware. I may even want to install Ubuntu Netbook Edition. But in any case, I'd like to able to restore the original, clean HDD image.
What would be the best strategy to do this? Make an image (using eg. Partition Image) before even starting up Windows 7? Make an image after running Windows 7 once (perhaps it needs to register / validate / activate)? I do not want to get into trouble with multiple activation.
View 2 Replies
View Related
May 29, 2012
I had made a full image of 3 drives using Win 7 backup tool. However, since then, I have removed 2 of the disks but I want to restore just one of the drives where the OS was installed (these are physical HDD= 3). Windows restore CD does not let me restore just one drive since the image is for all 3.Is there any way that I can force windows 7 to restore just one of the drives from the the full image with 3 drives? Unfortunately, the drives that I removed already have new data in another PC and pretty big (2T each). I don't to buy 2 drives just to install the OS image.
View 5 Replies
View Related
Oct 13, 2012
My c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
View 1 Replies
View Related
Apr 20, 2011
I have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
View 9 Replies
View Related
Jul 31, 2011
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies
View Related
Jul 19, 2009
i want to exclude the restore point files from defragmentation (Defraggler has that option). Where are the restore points stored? I found a tool to make hidden files visible. There is some information on Google where XP stores the files, but it seems to be different in Windows 7.My reason for excluding that from defragging (and excluding my download and temp folders) is to speed up defragmentation. Those files ae in flux anyway and fast access is not needed.BTW: how can I add a picture to my name in this forum??? I didn't find it in my account
View 9 Replies
View Related
Dec 19, 2012
my Windows-7 system is dead. Will not boot, and recovery options from previously made recovery disk have been unsuccessful. I do have a recent Windows-created System Image on a USB-Network drive, however all attempts at utilizing such have been unsuccessful. After navigating to the System Image Restore function from either my repair CD, or my OEM Windows CD, then selecting Search for image on the network function, then entering the full network address [\readyshareusb_storagelarrydelldesktopbackupwindowsimagebackupdell_desktopackup 2012-11-18 170013], then entering my network credentials, the system seems to search the location, but returns me to a blank "select the location of the backup you want to restore" screen.
Related problem... thinking the C-drive was toast, and knowing I have an OEM Windows-7 CD, I bought a new 3-TB drive. Installed the drive, attempted to do a clean-fresh system install on the new drive, and Win-7 tells me it can not install windows because of some hardware incompatibility issue. Since nothing was changed from the previously working Win-7 installation on this system, except the new 3TB hard drive..
I can either go with the backup system image, or clean install of Win-7 to the new drive to get me back up an running. I would actually prefer to install the backup image to the NEW drive, if possible.
View 9 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
May 3, 2011
Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a corrupt local profile. If this problem persists, contact your network administrator.
View 1 Replies
View Related
Jan 11, 2013
I have hgst hard passport drive .i wan to lock it so no one can access it
View 2 Replies
View Related
Jun 22, 2012
how to run the recovery 64 bits stored in hard disk
View 1 Replies
View Related
Jul 10, 2012
my 80GB WD Passport is not being detected by my laptop when plugged in (by USB). A LED at the side of the external hard drive indicates that it is being powered on even though the computer shows no sign of detection (no sound indication; nothing showing up in My Computer). External Hard Drive Specs 80GB Wd Passport, model wd1200u017-002.It is only compatible with USB 2.0.
Computer Specs
Windows edition: Windows 7 Home Premium
Manufacturer: Dell
Model: N5110
Processor: Intel(R) Core(TM) i3-2310M CPU2.10GHz 2.10 GHz
Installed memory (RAM): 6.00 GB
System type: 64-bit Operating System
(note this computer has both USB 2.0 and 3.0 ports, & I tried the harddrive in both ports)
View 8 Replies
View Related
Mar 2, 2012
How to copy my itunes to my passport hard drive
View 1 Replies
View Related
Jul 2, 2012
So it was working fine, i turned off my computer and went to bed, when turned it on the next morning the drive was no longer showing up so i checked disc management and it was in there as unallocated, the only options that are there when i right click are:Im running Windows 7 ultimate x86 (32bit) on PC and the External Hard Drive is a Western Digital 1TB Model WD 070A USB device.
View 4 Replies
View Related
Jul 13, 2011
how to recover data from portable hard drive / passporthe USB is not being reconigised by computer
View 1 Replies
View Related
Jan 21, 2013
I have a WD Passport, vintage 2007. I cannot access some large files that I created several years ago that I want to see, and then dump so I can use the file for backup for my new computer.
View 2 Replies
View Related
Feb 3, 2013
i have two hard drives on my computer both with windows 7 professional installed, now my main hard has gone on the blink and wont load up unless in safe mode, due to this i just hit f12 and swapped drive but i can not remember my password to log on and i am the only user with admin rights on the second hard drive, in saying this i can log on as a normal user, also i can log in my first drive as a admin user and search the second hard drive.my question is can i access a file to change my password as the admin user or make the user i can log on with into an administrator.
View 5 Replies
View Related
Aug 24, 2009
I need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies
View Related
May 26, 2012
I have a new external drive for backup, but can't find out what I have stored on it. How do I find that out?
View 3 Replies
View Related
Jul 24, 2012
I have instlled windows 7 in my c: drive and booting files are stored in another drive(d: drive). Due to this problem im unable to store my important files in d: drive. If I save my important files in that drive whenever I want to chnge the OS I suppose to format the two drives c: and d: drives. so I may lost my important files.
View 3 Replies
View Related
Aug 12, 2012
I have A brand new hard drive.I also have an image of win 7.I was using the usb dvd tool,but on this computer the Setup from USB freezes at Starting windows.I also have a fresh installation of WIN7 in a VM in my netbook.How would i Transfer it to my HDD?
View 9 Replies
View Related
Jan 14, 2011
Been awhile since I've been around here. I'm stuck with a new problem. My desktop's OS hard drive crashed/is crashing. After testing several pieces of hardware and reseating numerous items, I got lucky and was able to boot into safe mode, once. My event viewer is full of disk errors. Pages and pages of disk errors. *Side note: Sure would've been nice if Windows would have said something */End Side note* So I have a Windows System Image and Windows Backup on a secondary drive that appears healthy. But I'm just curious what I'm looking at when my new hard drive gets here.Has anyone ever used the Windows 7 Image Backup/Restore utility? Can you use the image on a different hard drive or just when repairing the original? Will my programs be saved or just data? Just curious questions. All of my Google searches are bringing up reviews about the utility from the Win 7 RC days so I'm not real sure what I'm getting myself into here.
View 2 Replies
View Related
May 15, 2012
i have recently taken a system image of my entire system,using Windows own.İ would like to hear from anybody here,who has done,the same,AND restored the image successfully
View 3 Replies
View Related
Jul 15, 2012
I created an image backup with Windows 7. It created a large VHD file and appeared tocomplete correctly. I copied the image to my thumb drive and tried to do a restore. I can find the thumb drive and browse it and all the files are there but if I try to do a restore it doesn't find the restore image. I also tried putting it on a network drive - it can'tfind it there even though I point it to the share it is in.I've tried using a restore CD, as well as installing Windows and using the recovery in control panel.The folder structure is asfollowsWindowsImageBackupcomputernameunder that folder are three foldersbackup 2012-07-15 232717CatalogSPPMetadataCachemetadataidIt seems odd there is no obvious way to just say this is the VHD - right here in this folder - use it and restore.
View 1 Replies
View Related
Sep 4, 2011
OS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
View 4 Replies
View Related
Sep 5, 2012
I have an HP Pavilion laptop and used recovery manager to do an image factory restore. Upon reboot it brings up the following message:
Please wait:
updrvltr:unknown
x:windowssystem32
It wants me to enter something at the command prompt. What I need to do?
View 29 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Jan 11, 2012
I have got a license for Acronis True Image Home 2010. To my surprise, I don't like it unlike many other folks who swear on this software.Acronis creates a backup image in .tib or .zip format whereas Windows 7 Backup and Restore creates system image in an encrypted folder (with all files and folders NOT formatted). In either case, backup image becomes ready for "restore". So why keep Acronis? Well, Acronis can backup custom files and folders unlike Windows 7 default program (and, Windows 7 does it, too), however, Acronis does "Create full path (includes drive letter)" which I simply dislike. Fbackup4 (free license), on the other hand, does not do it but does the job the way I want, i.e., creates files and folders the way they are organized (without including drive letter, and without zipping or making some unusual file format). So for data backup, Fbackup4 is better, IMO. I remember, WinXP creates crazy backup file format like Acronis does.Paragon Migrate OS to SSD SE (I have license for this, too) is special in the sense that it can copy the entire OS drive/partition to a blank drive. Very good for drive upgrade.
View 1 Replies
View Related
