[BIOS] Removing Raid1 And Reinstalling Programs/files?
May 22, 2011
I had a new computer assembled by a shop. I have I7 950 based system and has twin 1tb hardrives. I wanted to mirror the drives and files under windows, however the shop set up the drives in Raid1.(shop doesnt know what customer service is) I transferred all my files onto the drive with window home premium etc before realizing it had been instlled with Raid bios setup. I want to remove the raid format (bios) and clear the drives and reinstall the drives under windows to use one a a backup drive. I have a external drive I can use to assist and later use a a second backup drive.I understand once I clear the Raid formatting I will wipe all the info from the installed drives?Can I make a backup on my external drive and reinstall all my prgrams and files from my external drive once I do this. Also If I mirror windows 7 to my external drive can I reinstall this from my external drive to the internal drive or will it be set up as a raid format and not be of use?
Is it possible to transfer programs from my old windows.old file after a reinstall of the Windows 7 OS?
After the first installation of Windows 7 I was having weird performance issues which is why I'm doing the reinstall, but if there's a faster way of accessing my old programs without having to install all of them it would be a big help.
had to re-install windows 7 because of some problems. I have a backup HDD that has what I want. When I transfer the files to my new C drive from the back up everything is there but not active. How can I activate the transferred programs?
I've got a laptop with a partition on the main drive that holds some of the programs that came with the laptop (fingerprint reader, webcam software, etc.), but it's a 28 gig partition, and it's only using 2. I was wondering how I would go about removing the partition, but keeping the programs on the it. Will it work if I just copy-paste them over to the main drive and delete the partition? This is probably a stupid question, but I figure it's better to ask and know than guess and mess something up. There's also a folder in the partition called drivers, so my guess would be the aforementioned copy-paste technique won't work.
I have these files (renamed hi) that were from when I installed Windows 8. These files are program files, program files (x86), program data, and perf logs
i'm trying to understand what these folders are for, they are on my non system drive, i'm guessing they are left over from a previous windows installation. when I try to remove them it says I have no permission to modify them. How would I go about deleting them?
i was wondering why after i uninstall a program for instance "Yahoo! Mwssenger", after the uninstall is complete if i run a "search" there are all kinds of files left behind. Then if i try and remove them manually some say "cannot read" or "you don't have permission".I guess what i want to know is, what is the best way to remove a program without leaving any files behind or am i just going to have to live with the left behind files on my pc?
My work computer's hard drive is completely clogged up. I bought the Lenovo computer about a year ago, and it was working fine until about a month ago. Then I noticed that the hard drive was getting full, even though I haven't been doing anything different with it. We run our Quickbooks, our member database, and do light web browsing, spreadsheets, and word processing with it. Now programs aren't working because there's no drive space. I need to fix this fast, so I can have it working again on Monday.Earlier last week I defragged the drive, deleted extra documents, and emptied the trash can. I uninstalled unused and outdated programs that I recognized. Still, the drive kept filling up. I searched this forum, found this thread, and downloaded the recommended SpaceMonger onto a thumb drive. By using Spacemonger, I determined that over 90% of the drive space is taken up by "hidden" "temp" files. But it's not clear to me where they are, or how to remove them.How do I view and delete these hidden files?
When I transfer a file from a folder to a CD, example, after the files have been copied to the CD, as I do not need those files there anymore, I send them to the Trash bin, but somehow they remain on the same folder with 0 bytes.I have tried everything to make the names of those files disappear with no success. Disk Clean Up has failed and other programs as well.I have observed that this particular behaviour happens mainly with .pps files.They remain on my PPS folder but with o bytes.How can I remove them from the folders?
I'm running Windows 7 and have been unable to remove the below entry from my windows explorer download folder. When I trying deleting the file, I received an error message stating unable to locate the file.
I have an Intel 80GB SSD (bootable OS Windows 7 installed) and a WD 500GB HDD (storage and backup). Is it possible to mirror my SSD onto an 80GB volume on my HDD using Windows 7's RAID1? If so, do I suffer a performance hit on my read/write speeds in Windows 7 on my SSD?
I built my PC(Window 7 64 bit pro) year and an half ago with SSD, but now i planning to start my business, i am thinking to put to get two new SSDs on my pc to set up as RAID 1 (if i remember correctly, it help to store data in case one die)thinking to get Intel, but i hear some bad thing regarding to Intel with sandforce SSD, can someone point what is going to effect my pc?is it possible to clone my ext'g SSD with the OS to new RAID SSDs, then use the old SSD for minor storage, so my PC will never have problem with the SSD(if it does i just replace one of them) which software should i use for clone and how do i set up the RAID 1 if i do it.
I'm running RAID1 with two 1tb drives. My RAID went critical and split the drives. One drive was listed as LD 2 -1. The other is listed as <single disk>. I was able to unplug either individually and boot into windows. I decided to erase one of them and planned to rebuid the array afterwards. At this point, I can see the erased HDD in BIOS and in RAID setup, but it will not boot to Window with the erased drive connected. It starts to boot into Windows, then gives a brief flash of BSOD, then reboots itself.
I'm currently have 1 SSD for OS and 2 HDD in RAID1 for data, all connected to the same Intel controller on my EVGA X58 3x SLI motherboard. I'm planning to re-install Windows 7 x64 Pro on the SSD. While doing this, I would also like to reformat the 2 RAIDed HDD's. What are the steps that I need in order to reformat the RAID1?
My SATA mode is set to AHCI at the moment. If I set the SATA mode to RAID and I boot to Windows, I'll get BSOD after the Windows logo screen. I'm not having Intel Matrix Storage Manager installed. The last time I did so on my current OS (also Win 7 x64 Pro), I got some weird chkdsk error, in which I was given thousands of "Replacing invalid security id with default id ..." for files on the RAIDed drive.
I'm planning to reuse the same 2 HDD's for RAID1 after the reinstallation. I've already copied the current data on the RAIDed disks to some external USB source.
I have an OCZ Vertex 3 SSD and 2 WD caviar blue HDDs. I have them installed on an ASUS Maximus IV Gene-Z MB. I have Win 7 Home Installed on the SSD and would like to set up a RAID 1 array with the HDDs for my data storage (music, pictures, etc.). From what I understand I must do a hardware RAID setup since Win 7 Home does not support the software RAID array. The only information I could find is how to install windows on the array and not use it as a non-bootable array for data storage.
I put two HDDs on GA P55A-UD4P motherboard in Raid1 type array (on Intel SATA Controller) and they were working fine for quite some time (2 weeks or so). One day, after Windows started up, I noticed a blue icon on Intel RST manager and it says that the array is initializing. Will it delete the data that is stored in there already ? As far as I know, initialization is needed in Raid5 type arrays, where parity needs to be calculated. Raid1 is a pure mirror so what would be the need for initialization right now with data in the array already?
I'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working
After reinstalling a new coly of windows 7 i cannot find my pictures in folders windows.old.The strange think is that i cannot find the pictures and the files that where in a sub folder inside a directory. The capacity of my hard disk shows that files are not deleted but i still cannot find them.
I have Dell Inspiron N5010. I was using windows 7 home basic 32 bit os. I wanted to change it to windows 7 ultimate. So I have inserted windows 7 Installation disk into CD drive. Then I went to through the installation and I chose the Custom as the installation type.When the partition page appeared, I have formatted all the disks including C which contains windows files. Then I got 298 GB unallocated space. Then I split them in to 4 partitions. Then I have selected one partition to install the windows. Then installation started .
Copying windows files succeeded. Expanding Windows files(0%) is still be like that for 20 minutes. Then I got the error message like: "Windows cannot install required files. Error code 0x80070017". And I thought it would be the installation disk problem. But it works fine in other systems. I tried several disks. No use. Also I got another problem. When system boots I tried to enter into BIOS using F2 and F12 which was mentioned in screen. But it did not enter into the BIOS, Instead it goes to the installation.
So I just built a new gaming computer with the following relevant specs..- Win 7 Enterprise- 90GB OCZ Vertex 3 SSD- 750GB Hitachi Sata III, 7200RPM HDD- Games: World of Warcraft, Skyrim, Star WarsMy thought was to just save the OS and games on the SSD for best performance, and everything else on the HDD. I did that initially and only used about 50GB on the SSD.Since then I've downloaded many drivers, manuals, game mods, and programs (like Adobe, Logitech, etc), most of which just saved directly to the SSD without giving me the option of a different path? Now I have only 5GB left on my SSD and want to make sure I only keep the files/programs on it that will provide the best performance.n my SSD I have 4 files:Program Files - contains drivers (Asus mobo, DVD recorder, Mcafee, etc), IE, McAfee, Nvidia, and Windows files (Dfender, Media Player, etc)Program Files (x86) - contains many of the same files that the "Program Files" has in it??Users - My documents, Downloads, Desktop, etc...Windows - bunch of stuff that looks like it needs to be thereQuestions:1) What kind of files/programs should I keep on my SSD vs. my HDD aside from the OS and games for best performance?2) I read in a thread here that "Program Files" folder is for programs designed for 64-bit, and the programs that go into "Program Files (x86)" folder are designed for 32-bit. But, why are things duplicated in them, and why (even as an Admin) can't I delete files off them (tells me I don't have permission)? Do I really need files in both of them if I'm running at 64 bit??3) I'm often not given a choice on where to save downloaded programs.How do I set it up so all my downloaded programs save to my HDD moving forward?
I have some programs that need to write to DAT files located in the -->AppDataRoaming directories for each specific program but when they want to make these writes they are denied access and an Access is denied error message is returned (see attachment). I'm using Windows7. Anyone know what I can do to rectify this?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit Processor: AMD A6-3500 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0 Processor Count: 3 RAM: 16363 Mb Graphics Card: ATI Radeon HD 4650, 1024 Mb Hard Drives: C: Total - 953866 MB, Free - 788112 MB; E: Total - 953868 MB, Free - 190025 MB; F: Total - 953866 MB, Free - 18578 MB; G: Total - 1907728 MB, Free - 82515 MB; Motherboard: ASRock, A75 Pro4 Antivirus: avast! Antivirus, Updated and Enabled
i have just created a second user on my laptop for my partner as im sick of having to re do my iTunes library every time she wants her iPod updating (we like different music).Google chrome is not visible neither are any of my music/pics or films that are on my main user profile. I have tried doing a google search to find a solution but can not make head nor tails of it
Ive done a clean install, and i previously backed up my Vaio. When i try to restore programs however, it wont let me do it. It says "your files have been restored" but also says " some program or system files were skipped because they cannot be restored to original location. To restore these files, try restoring the files again and select a different location." Which location do i chose so that the programs appear in my "all programs" tab?
I've run across a weird error that is making me bang my head against the wall.. I am running windows professional x64
I cannot seem to start any x86 programs from their shortcuts, or exe files. The problem exists in both regular and safe mode. When I click the exe or shortcut, the process comes up in the task bar using a tiny amount of memory (~100K) and just sits there.
I CAN run any program from cmd using the start command (start path o.exe), and I also can run any x64 programs that I have installed. I have tried sfc /scannnow and chkdsk /r.
Also, if I add a program to the startup list (registry or startup folder) it starts up fine on boot.
When I click on the Windows icon in the lower left corner of my screen, a menu opens. At the bottom of that menu is a line that says "all programs". It opens into a menu of programs on my machine.
Inside of "all programs" is listed a folder called Microsoft. Inside of it is Outlook 2010.
However, I recently wanted to send an email using Outlook 2010 by clicking on a link on a website. A window opened that would allow me to select the email client I wanted to use from a list of programs. But I can't find Outlook 2010.
When I click the Windows icon in the lower left corner of my screen & then on "computer" and then on C drive, there is listed in C drive two folders, Programs & Programs (x86). However, the Microsoft folder containing Outlook 2010 is not in either one of them.
When I did a search for Outlook 2010 on my C drive, the result said it can be found at C:ProgramDataMicrosoftStart MenuProgramsMicrosoft Office
However, I cick the Windows icon in the lower left corner of my screen & then on "computer" and then on C drive, I cannot find a ProgramData directory. So, where is my Ourlook 2010?
