I have an Intel 80GB SSD (bootable OS Windows 7 installed) and a WD 500GB HDD (storage and backup). Is it possible to mirror my SSD onto an 80GB volume on my HDD using Windows 7's RAID1? If so, do I suffer a performance hit on my read/write speeds in Windows 7 on my SSD?
View 2 Replies
I'm currently have 1 SSD for OS and 2 HDD in RAID1 for data, all connected to the same Intel controller on my EVGA X58 3x SLI motherboard. I'm planning to re-install Windows 7 x64 Pro on the SSD. While doing this, I would also like to reformat the 2 RAIDed HDD's. What are the steps that I need in order to reformat the RAID1?
My SATA mode is set to AHCI at the moment. If I set the SATA mode to RAID and I boot to Windows, I'll get BSOD after the Windows logo screen. I'm not having Intel Matrix Storage Manager installed. The last time I did so on my current OS (also Win 7 x64 Pro), I got some weird chkdsk error, in which I was given thousands of "Replacing invalid security id with default id ..." for files on the RAIDed drive.
I'm planning to reuse the same 2 HDD's for RAID1 after the reinstallation. I've already copied the current data on the RAIDed disks to some external USB source.
I built my PC(Window 7 64 bit pro) year and an half ago with SSD, but now i planning to start my business, i am thinking to put to get two new SSDs on my pc to set up as RAID 1 (if i remember correctly, it help to store data in case one die)thinking to get Intel, but i hear some bad thing regarding to Intel with sandforce SSD, can someone point what is going to effect my pc?is it possible to clone my ext'g SSD with the OS to new RAID SSDs, then use the old SSD for minor storage, so my PC will never have problem with the SSD(if it does i just replace one of them) which software should i use for clone and how do i set up the RAID 1 if i do it.
View 3 Replies View RelatedI'm running RAID1 with two 1tb drives. My RAID went critical and split the drives. One drive was listed as LD 2 -1. The other is listed as <single disk>. I was able to unplug either individually and boot into windows. I decided to erase one of them and planned to rebuid the array afterwards. At this point, I can see the erased HDD in BIOS and in RAID setup, but it will not boot to Window with the erased drive connected. It starts to boot into Windows, then gives a brief flash of BSOD, then reboots itself.
View 9 Replies View RelatedI have an OCZ Vertex 3 SSD and 2 WD caviar blue HDDs. I have them installed on an ASUS Maximus IV Gene-Z MB. I have Win 7 Home Installed on the SSD and would like to set up a RAID 1 array with the HDDs for my data storage (music, pictures, etc.). From what I understand I must do a hardware RAID setup since Win 7 Home does not support the software RAID array. The only information I could find is how to install windows on the array and not use it as a non-bootable array for data storage.
View 5 Replies View RelatedWhether in the form of Windows software, this feature is that if we have two disk For example, one of the drives and disk drive 0 with one of the disc 1 are mirror.disk 0 if the is corrupted for any reason. Data from one come up?
View 1 Replies View RelatedI have windows 7, I have 3 harddisks.1 I use for my installation of windowsand on 2 harddisks I have my data but those 2 drives I made a mirror in Windows.What, if I reinstall windows, do I lose the data or does windows split the mirror?
View 2 Replies View RelatedI had a new computer assembled by a shop. I have I7 950 based system and has twin 1tb hardrives. I wanted to mirror the drives and files under windows, however the shop set up the drives in Raid1.(shop doesnt know what customer service is) I transferred all my files onto the drive with window home premium etc before realizing it had been instlled with Raid bios setup. I want to remove the raid format (bios) and clear the drives and reinstall the drives under windows to use one a a backup drive. I have a external drive I can use to assist and later use a a second backup drive.I understand once I clear the Raid formatting I will wipe all the info from the installed drives?Can I make a backup on my external drive and reinstall all my prgrams and files from my external drive once I do this. Also If I mirror windows 7 to my external drive can I reinstall this from my external drive to the internal drive or will it be set up as a raid format and not be of use?
View 1 Replies View RelatedI put two HDDs on GA P55A-UD4P motherboard in Raid1 type array (on Intel SATA Controller) and they were working fine for quite some time (2 weeks or so). One day, after Windows started up, I noticed a blue icon on Intel RST manager and it says that the array is initializing. Will it delete the data that is stored in there already ? As far as I know, initialization is needed in Raid5 type arrays, where parity needs to be calculated. Raid1 is a pure mirror so what would be the need for initialization right now with data in the array already?
View 1 Replies View RelatedI'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working
View 2 Replies View RelatedI bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
View 4 Replies View RelatedI built a new computer.I wanted it to be more reliable. So, I got two identical hard drives. I installed Win 7 Pro as one big C: partition. Then I converted to dynamic disks and mirrored the first disk onto the second disk. Everything works! I even gave it a test. I powered off, and disconnected the SATA cable on the first hard disk. Windows booted right up, off the second HD. Great! It seems the mirroring works and can tolerate a missing disk.(I had to rebuild the mirror after doing this test.)I have some questions about how this will work over the long term. I noticed that when the first hard drive was missing from the mirror Windows never gave an error message. How would I detect a failing or failed hard drive? This is important, I think.How does Windows deal with a bad read on one hard drive in a two drive mirror? Say if one disk reads correctly, but the second disk reads a bad sector, how does Windows know what is the correct data?I found that Windows gives a text mode menu when I first boot up the computer. It wants me to select which Windows I will boot: the first hard drive or the second "Plex". Is there a way to set a default, so it will always boot the first instance of Windows without user intervention? Or would this defeat the mirroring function in the case of a bad hard drive?
View 3 Replies View RelatedI have Home Windows 7 premium which means I cannot Encrypt, create dynamic disks, or mirror (RAID 1) my hard drives, so if this is true and I want to use any of these I need to go back to my Vista Ultimate?
View 6 Replies View RelatedDisk 0 contains two partitions: System Reserved (active) and C: Disk 0 is dynamic
Disk 2 is unallocated Only the System Reserved partition can be mirrored, "add mirror..." on C: is greyed out. If I mirror System Reserved, I still can't mirror C:
I am guessing if I make C: active, my system won't boot?
Can somebody please advise how to only copy data changes to a 2nd mirror drive (identical) is there any software free or buy that will do this job quickly as I have been doing it manually.I have 2 drive identical and I work on one for some time then I clone it to the 2nd drive but all I really want to do is copy the data/work only and not system files.
View 2 Replies View RelatedI have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?
View 6 Replies View RelatedSo, I installed windows 7 ultimate with 2 drives. I'm running on a MB with an AHCI (ICH10R SATA controller - No extra drivers needed. Windows 7 sees the drives fine during install). It did the normal thing on 1 drive of making a system reserved partition with all the bootmgr and BCD stuff. I'm not able to mirror it. But, I was able to mirror the main installation partition.
Forward a few days - Drive 1 (the one with the "System" (BCD and bootmgr) and the main installlation) dies. Now I have another drive with just the main installation. Of course, I can't boot anymore.
OK, I think - I'll add the missing boot files to the still working drive. I boot the install CD, go into a CMD prompt. Break the mirror, and make the working partition standalone. I copy bootmgr onto the drive's root, create a "Boot" folder. A run diskpart and mark the partition as active. I run bootrec/rebuildbcd (which works and finds my installation), bootrec/fixmbr (also works) and bootrec/fixboot (also works). Great, so now I can boot?
Wrong. I just get a blinking cursor on trying to boot. I've run through the GUI repair, and still no go. I cannot figure out what's missing.
So, the bottom line is - If you're using a mirror thinking you're safe - Think again. Your data will be safe, but forget ever booting that installation again.
Im getting a new harddrive, after being annoyed endlessly by loading objects in games (5400 rpm/uber slow). However I only have the upgrade version of Windows 7 Professional. So my question is can I use Windows 7 backup image to restore the image on a different hard drive to boot from? I do have multiple computers available incase I need them.
I know the best way is to use a Drive image utility, however I am not fond of paying extra $$ since I am on a strict budget at the moment. I need alternatives to fresh install because it would take me days to redownload or reinstall all the setup.
Mostly CS4 is what concerns me (legit). Now I could have it reinstalled but I won't be able to for a while due to the missing key/discs.
I'm trying to find the best way to
1) create a disk image for disaster recovery
2) synchronize folders and files to protect against accidental deletion, erroneous save-overs, transferring to another computer, etc.
I have a 1 Tb external hard drive which is plenty of space for me to use for both.Can be either one program that performs both functions, or two separate programs. I don't want automatic backups, since I plan to store my external drive in a fireproof safe soon. I need the sync'd files to be browse-able (not contained in a single image file)...just like a flash drive basically. I would like something that only backs up new files or ones that have been changed (to cut back on backup time...but maybe this is standard for syncing and mirroring programs. ??) Needs to be able to handle long file names A nice GUI Cost - free to low (I'd pay up to $30ish...but free would be great) I was thinking of using Windows 7 Backup & Restore for the disk imaging, and then SyncToy for the file/folder syncing...but is this the best option?
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
View 4 Replies View RelatedIs there any way to set up a mirrored monitor setup with monitors of differing resolutions, but simultaneously maintain the native resolution on both monitors?
I have an onboard G31 video on my system. This particular motherboard has both a DVI and VGA output. I have DVI connected to an LCD (1980 x 1020) and VGA connected to a plasma 720p TV. When I mirror the monitors, the monitor and TV both display 1368 x 720.
I know that I could "extend" instead of "mirror," and thus fix the problem. But because this computer is ultimately for my grandmother's setup, using "extend" will not be an option, as it will greatly confuse her and make matter exponentially worse.
Is it possible to mirror and maintain native resolutions with some sort of software? Could I achieve this by purchasing two separate graphics cards?
I have an external enclosure. Could anyone point to me where to go and read in point blank detail step by step how to:
1. Make a mirror image backup copy of the pc hard drive including partitions and the OS..
2. How to set it in such a way that I could save the eventual changes produced in that backed up copy by doing in future just an incremental back up each time (of only what has changed since the previous backup).I am running Windows 7 Home 64-bit.
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
View 1 Replies View RelatedI have an Alienware m17x laptop (Dell) running Win 7 Pro 64-bit. I have it set up to output to an external 22" monitor as a two-monitor setup, and the monitors are set to extend the desktop across both monitors.
Occasionally it will suddenly revert to mirroring the desktop on both monitors. After I go in to the setting I change it back to extended desktop, but my wallpaper disappears (desktop is black). Although the taskbar is still there, and works fine.
This also, possibly, has caused desktop shortcuts not to display. I generally don't keep any desktop shortcuts. all the default ones are set not to display, and even my recycle bin is on the taskbar, but if I go to an .exe file in explorer, or even from the start menu, and choose Send > To desktop as shortcut, _no_ shortcut appears on the desktop.
I looked in my actual desktop folder, and all the shortcuts are there, they just won't appear on the desktop!
Any ideas? I know there are problems with Dell computers and Win 7 as far as graphics go, is this just another Dell quirk?
how do I mirror print on the Canon MP560 for printing a T Shirt
View 1 Replies View RelatedI am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View RelatedOn hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
Hi everyone. I installed Windows 8 today. I did partition the disk like in a guide, however, I missed where to install...I downloaded a Windows 7 iso image today and burned it to a disk, will I be able to install Windows 7 again from a disc? I still have Windows.old folder in my C drive, is there any way to dual boot Win8 and Windows 7?
View 9 Replies View RelatedI am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
I installed Win 7 Ultimate onto my brothers Win 7 Home Edn laptop. I didn't realise at first and he has done quite a bit of work on it since the installation, on iTunes and the like. I only noticed the error when trying to activate windows and, of course, as the laptop is Home Edn, and I used an Ultimate disc it didn't take the key on the laptop. So I have now installed Home edition and have the Windows.old folder present. I basically need to put all the programs and file/folders etc into the new OS.
View 4 Replies View Related
