Im getting a new harddrive, after being annoyed endlessly by loading objects in games (5400 rpm/uber slow). However I only have the upgrade version of Windows 7 Professional. So my question is can I use Windows 7 backup image to restore the image on a different hard drive to boot from? I do have multiple computers available incase I need them.
I know the best way is to use a Drive image utility, however I am not fond of paying extra $$ since I am on a strict budget at the moment. I need alternatives to fresh install because it would take me days to redownload or reinstall all the setup.
Mostly CS4 is what concerns me (legit). Now I could have it reinstalled but I won't be able to for a while due to the missing key/discs.
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
On hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
Can somebody please advise how to only copy data changes to a 2nd mirror drive (identical) is there any software free or buy that will do this job quickly as I have been doing it manually.I have 2 drive identical and I work on one for some time then I clone it to the 2nd drive but all I really want to do is copy the data/work only and not system files.
So, I installed windows 7 ultimate with 2 drives. I'm running on a MB with an AHCI (ICH10R SATA controller - No extra drivers needed. Windows 7 sees the drives fine during install). It did the normal thing on 1 drive of making a system reserved partition with all the bootmgr and BCD stuff. I'm not able to mirror it. But, I was able to mirror the main installation partition.
Forward a few days - Drive 1 (the one with the "System" (BCD and bootmgr) and the main installlation) dies. Now I have another drive with just the main installation. Of course, I can't boot anymore.
OK, I think - I'll add the missing boot files to the still working drive. I boot the install CD, go into a CMD prompt. Break the mirror, and make the working partition standalone. I copy bootmgr onto the drive's root, create a "Boot" folder. A run diskpart and mark the partition as active. I run bootrec/rebuildbcd (which works and finds my installation), bootrec/fixmbr (also works) and bootrec/fixboot (also works). Great, so now I can boot?
Wrong. I just get a blinking cursor on trying to boot. I've run through the GUI repair, and still no go. I cannot figure out what's missing.
So, the bottom line is - If you're using a mirror thinking you're safe - Think again. Your data will be safe, but forget ever booting that installation again.
I built a new computer.I wanted it to be more reliable. So, I got two identical hard drives. I installed Win 7 Pro as one big C: partition. Then I converted to dynamic disks and mirrored the first disk onto the second disk. Everything works! I even gave it a test. I powered off, and disconnected the SATA cable on the first hard disk. Windows booted right up, off the second HD. Great! It seems the mirroring works and can tolerate a missing disk.(I had to rebuild the mirror after doing this test.)I have some questions about how this will work over the long term. I noticed that when the first hard drive was missing from the mirror Windows never gave an error message. How would I detect a failing or failed hard drive? This is important, I think.How does Windows deal with a bad read on one hard drive in a two drive mirror? Say if one disk reads correctly, but the second disk reads a bad sector, how does Windows know what is the correct data?I found that Windows gives a text mode menu when I first boot up the computer. It wants me to select which Windows I will boot: the first hard drive or the second "Plex". Is there a way to set a default, so it will always boot the first instance of Windows without user intervention? Or would this defeat the mirroring function in the case of a bad hard drive?
I am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
Using an image posting website and I've recently updated to windows 7. I used to be able to have my images come up as thumbnails without having to Right Click > View > Large Icons everytime. Also I used to have filmstrip option.here's where prob isUploaded with ImageShack.usevery time i go to upload a picture it comes up as a list.Now when I explore the folder via Desktop > b > Girls the images come up as thumbnails as i've set it for all folders already. How can I set it for when I'm in IE and uploading?
Now I have a doubt if drive images will work on different computers. I think windows may not work if I do it. Have any of you guys tried it? I also know that unnecessary drivers may be left installed. But the main question is will Windows work if I transfer a drive image to a different computer?
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
Whether in the form of Windows software, this feature is that if we have two disk For example, one of the drives and disk drive 0 with one of the disc 1 are mirror.disk 0 if the is corrupted for any reason. Data from one come up?
I have an Intel 80GB SSD (bootable OS Windows 7 installed) and a WD 500GB HDD (storage and backup). Is it possible to mirror my SSD onto an 80GB volume on my HDD using Windows 7's RAID1? If so, do I suffer a performance hit on my read/write speeds in Windows 7 on my SSD?
I have windows 7, I have 3 harddisks.1 I use for my installation of windowsand on 2 harddisks I have my data but those 2 drives I made a mirror in Windows.What, if I reinstall windows, do I lose the data or does windows split the mirror?
Disk 0 contains two partitions: System Reserved (active) and C: Disk 0 is dynamic Disk 2 is unallocated Only the System Reserved partition can be mirrored, "add mirror..." on C: is greyed out. If I mirror System Reserved, I still can't mirror C:
I am guessing if I make C: active, my system won't boot?
I have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?
1) create a disk image for disaster recovery 2) synchronize folders and files to protect against accidental deletion, erroneous save-overs, transferring to another computer, etc.
I have a 1 Tb external hard drive which is plenty of space for me to use for both.Can be either one program that performs both functions, or two separate programs. I don't want automatic backups, since I plan to store my external drive in a fireproof safe soon. I need the sync'd files to be browse-able (not contained in a single image file)...just like a flash drive basically. I would like something that only backs up new files or ones that have been changed (to cut back on backup time...but maybe this is standard for syncing and mirroring programs. ??) Needs to be able to handle long file names A nice GUI Cost - free to low (I'd pay up to $30ish...but free would be great) I was thinking of using Windows 7 Backup & Restore for the disk imaging, and then SyncToy for the file/folder syncing...but is this the best option?
Is there any way to set up a mirrored monitor setup with monitors of differing resolutions, but simultaneously maintain the native resolution on both monitors?
I have an onboard G31 video on my system. This particular motherboard has both a DVI and VGA output. I have DVI connected to an LCD (1980 x 1020) and VGA connected to a plasma 720p TV. When I mirror the monitors, the monitor and TV both display 1368 x 720.
I know that I could "extend" instead of "mirror," and thus fix the problem. But because this computer is ultimately for my grandmother's setup, using "extend" will not be an option, as it will greatly confuse her and make matter exponentially worse.
Is it possible to mirror and maintain native resolutions with some sort of software? Could I achieve this by purchasing two separate graphics cards?
I have an external enclosure. Could anyone point to me where to go and read in point blank detail step by step how to:
1. Make a mirror image backup copy of the pc hard drive including partitions and the OS..
2. How to set it in such a way that I could save the eventual changes produced in that backed up copy by doing in future just an incremental back up each time (of only what has changed since the previous backup).I am running Windows 7 Home 64-bit.
I bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
I have an Alienware m17x laptop (Dell) running Win 7 Pro 64-bit. I have it set up to output to an external 22" monitor as a two-monitor setup, and the monitors are set to extend the desktop across both monitors.
Occasionally it will suddenly revert to mirroring the desktop on both monitors. After I go in to the setting I change it back to extended desktop, but my wallpaper disappears (desktop is black). Although the taskbar is still there, and works fine.
This also, possibly, has caused desktop shortcuts not to display. I generally don't keep any desktop shortcuts. all the default ones are set not to display, and even my recycle bin is on the taskbar, but if I go to an .exe file in explorer, or even from the start menu, and choose Send > To desktop as shortcut, _no_ shortcut appears on the desktop.
I looked in my actual desktop folder, and all the shortcuts are there, they just won't appear on the desktop!
Any ideas? I know there are problems with Dell computers and Win 7 as far as graphics go, is this just another Dell quirk?
