Whether in the form of Windows software, this feature is that if we have two disk For example, one of the drives and disk drive 0 with one of the disc 1 are mirror.disk 0 if the is corrupted for any reason. Data from one come up?
View 1 RepliesI have an Intel 80GB SSD (bootable OS Windows 7 installed) and a WD 500GB HDD (storage and backup). Is it possible to mirror my SSD onto an 80GB volume on my HDD using Windows 7's RAID1? If so, do I suffer a performance hit on my read/write speeds in Windows 7 on my SSD?
View 2 Replies View RelatedI have windows 7, I have 3 harddisks.1 I use for my installation of windowsand on 2 harddisks I have my data but those 2 drives I made a mirror in Windows.What, if I reinstall windows, do I lose the data or does windows split the mirror?
View 2 Replies View RelatedI bought a laptop running windows 7 SP1 with some other software already installed on it. I recently upgraded to a desktop that is much faster also running windows 7. I made a mirror of the laptop HDD. Is there a way to install this mirror onto the desktop HDD so that I can use my new desktop as if it were my laptop?
View 4 Replies View RelatedI built a new computer.I wanted it to be more reliable. So, I got two identical hard drives. I installed Win 7 Pro as one big C: partition. Then I converted to dynamic disks and mirrored the first disk onto the second disk. Everything works! I even gave it a test. I powered off, and disconnected the SATA cable on the first hard disk. Windows booted right up, off the second HD. Great! It seems the mirroring works and can tolerate a missing disk.(I had to rebuild the mirror after doing this test.)I have some questions about how this will work over the long term. I noticed that when the first hard drive was missing from the mirror Windows never gave an error message. How would I detect a failing or failed hard drive? This is important, I think.How does Windows deal with a bad read on one hard drive in a two drive mirror? Say if one disk reads correctly, but the second disk reads a bad sector, how does Windows know what is the correct data?I found that Windows gives a text mode menu when I first boot up the computer. It wants me to select which Windows I will boot: the first hard drive or the second "Plex". Is there a way to set a default, so it will always boot the first instance of Windows without user intervention? Or would this defeat the mirroring function in the case of a bad hard drive?
View 3 Replies View RelatedI have Home Windows 7 premium which means I cannot Encrypt, create dynamic disks, or mirror (RAID 1) my hard drives, so if this is true and I want to use any of these I need to go back to my Vista Ultimate?
View 6 Replies View RelatedI'm putting together a slide show of 3D images that I want to show on my TV next week when we have company.I would like the images to stay on the screen a little longer without having to actually create a slide show in some special application like Premiere.
The Slide Show function in Explorer works great if I can control the timing.
Disk 0 contains two partitions: System Reserved (active) and C: Disk 0 is dynamic
Disk 2 is unallocated Only the System Reserved partition can be mirrored, "add mirror..." on C: is greyed out. If I mirror System Reserved, I still can't mirror C:
I am guessing if I make C: active, my system won't boot?
Can somebody please advise how to only copy data changes to a 2nd mirror drive (identical) is there any software free or buy that will do this job quickly as I have been doing it manually.I have 2 drive identical and I work on one for some time then I clone it to the 2nd drive but all I really want to do is copy the data/work only and not system files.
View 2 Replies View RelatedI have a new windows 7 64-bit computer and two 4-year old external Western Digital HDDs. They connect fine and transfer data okay except when i try to do a Windows system mirror.All was well with XP Pro and the same HDDs but Windows 7 tells me the HDDs are not formatted to NTFS.Firstly, what does this mean as i would really like a system mirror and secondly, is there a way round it withpout formatting the HDDs and losing all the data?
View 6 Replies View RelatedSo, I installed windows 7 ultimate with 2 drives. I'm running on a MB with an AHCI (ICH10R SATA controller - No extra drivers needed. Windows 7 sees the drives fine during install). It did the normal thing on 1 drive of making a system reserved partition with all the bootmgr and BCD stuff. I'm not able to mirror it. But, I was able to mirror the main installation partition.
Forward a few days - Drive 1 (the one with the "System" (BCD and bootmgr) and the main installlation) dies. Now I have another drive with just the main installation. Of course, I can't boot anymore.
OK, I think - I'll add the missing boot files to the still working drive. I boot the install CD, go into a CMD prompt. Break the mirror, and make the working partition standalone. I copy bootmgr onto the drive's root, create a "Boot" folder. A run diskpart and mark the partition as active. I run bootrec/rebuildbcd (which works and finds my installation), bootrec/fixmbr (also works) and bootrec/fixboot (also works). Great, so now I can boot?
Wrong. I just get a blinking cursor on trying to boot. I've run through the GUI repair, and still no go. I cannot figure out what's missing.
So, the bottom line is - If you're using a mirror thinking you're safe - Think again. Your data will be safe, but forget ever booting that installation again.
Im getting a new harddrive, after being annoyed endlessly by loading objects in games (5400 rpm/uber slow). However I only have the upgrade version of Windows 7 Professional. So my question is can I use Windows 7 backup image to restore the image on a different hard drive to boot from? I do have multiple computers available incase I need them.
I know the best way is to use a Drive image utility, however I am not fond of paying extra $$ since I am on a strict budget at the moment. I need alternatives to fresh install because it would take me days to redownload or reinstall all the setup.
Mostly CS4 is what concerns me (legit). Now I could have it reinstalled but I won't be able to for a while due to the missing key/discs.
I'm trying to find the best way to
1) create a disk image for disaster recovery
2) synchronize folders and files to protect against accidental deletion, erroneous save-overs, transferring to another computer, etc.
I have a 1 Tb external hard drive which is plenty of space for me to use for both.Can be either one program that performs both functions, or two separate programs. I don't want automatic backups, since I plan to store my external drive in a fireproof safe soon. I need the sync'd files to be browse-able (not contained in a single image file)...just like a flash drive basically. I would like something that only backs up new files or ones that have been changed (to cut back on backup time...but maybe this is standard for syncing and mirroring programs. ??) Needs to be able to handle long file names A nice GUI Cost - free to low (I'd pay up to $30ish...but free would be great) I was thinking of using Windows 7 Backup & Restore for the disk imaging, and then SyncToy for the file/folder syncing...but is this the best option?
I've an all-in-one computer but would like to mirror the hard drive with an external usb drive, main hd 1T internal and 2T external partitioned into 2x1T one for mirror and other for data. Is this possable, running 7 Ultimate.
View 4 Replies View RelatedIs there any way to set up a mirrored monitor setup with monitors of differing resolutions, but simultaneously maintain the native resolution on both monitors?
I have an onboard G31 video on my system. This particular motherboard has both a DVI and VGA output. I have DVI connected to an LCD (1980 x 1020) and VGA connected to a plasma 720p TV. When I mirror the monitors, the monitor and TV both display 1368 x 720.
I know that I could "extend" instead of "mirror," and thus fix the problem. But because this computer is ultimately for my grandmother's setup, using "extend" will not be an option, as it will greatly confuse her and make matter exponentially worse.
Is it possible to mirror and maintain native resolutions with some sort of software? Could I achieve this by purchasing two separate graphics cards?
I have an external enclosure. Could anyone point to me where to go and read in point blank detail step by step how to:
1. Make a mirror image backup copy of the pc hard drive including partitions and the OS..
2. How to set it in such a way that I could save the eventual changes produced in that backed up copy by doing in future just an incremental back up each time (of only what has changed since the previous backup).I am running Windows 7 Home 64-bit.
I have my present hard drive backed up using Windows Backup on an external hard drive. I want to replace the 500gb hard drive in my desktop with a 1tb hard drive, I am assuming (i know bad word) after the transfer is complete the new hard drive will be recognized and function on boot as the 500gb drive did.
View 1 Replies View RelatedI have an Alienware m17x laptop (Dell) running Win 7 Pro 64-bit. I have it set up to output to an external 22" monitor as a two-monitor setup, and the monitors are set to extend the desktop across both monitors.
Occasionally it will suddenly revert to mirroring the desktop on both monitors. After I go in to the setting I change it back to extended desktop, but my wallpaper disappears (desktop is black). Although the taskbar is still there, and works fine.
This also, possibly, has caused desktop shortcuts not to display. I generally don't keep any desktop shortcuts. all the default ones are set not to display, and even my recycle bin is on the taskbar, but if I go to an .exe file in explorer, or even from the start menu, and choose Send > To desktop as shortcut, _no_ shortcut appears on the desktop.
I looked in my actual desktop folder, and all the shortcuts are there, they just won't appear on the desktop!
Any ideas? I know there are problems with Dell computers and Win 7 as far as graphics go, is this just another Dell quirk?
how do I mirror print on the Canon MP560 for printing a T Shirt
View 1 Replies View RelatedI am replacing my HHD with a SSD and made a mirror image on my backup external drive. When I tried to do the system image recovery, it fails to find the recovery information. It says the no disk that can be used for recovering the system disk can be found.
View 6 Replies View Relatedjust completed a first-time new Windows 7 PC build. Successful installation of Windows 7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.
BIOS sees all HDDs, but are not viewable in Disk Management.
System Specs:
Antec Nine Hundred
ASUS P6X58D-E MOBO
[Code].....
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.
On hard drive drive only Win7 mirror image."Some Smart" deleted all. Motherboard was bad - change motherboard & memory.Start resoring windows and when it start setting for first time say config error.
View 1 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
I was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my screen. I scaned my hdd for errors using my Bios/Advanced options and no errors came up. I decided to take out the hdd and put it into my External Hdd bay to hook up to my laptop to extract the data off it.When i hooked it up to my laptop it showed up empty. I went into folder options and clicked on show hidden files and folders. Everything came up but it was grey/transparent. I then copied the files to another hdd for backup.
Then i formatted the hdd and put on a fresh new OS. Id like to mention i have a second internal drive that i use for backups but it wasnt backed up recently when this issue happen so i had to take out the main drive and use it as an external to back up onto another external drive.so then when i click on my second internal drive after the reinstall of the new OS it shows empty i have to go in and show hidden files and folders.. now they show again transparent. also i plug in my external to get the recent back up and all those files are still transparent when i move them to my desktop that is freshly OS installed they are still grey/transparent and i have to keep the show hidden files and folders to view them.. so its all my music, pics, documents etc they are all greyed out..i tried to copy my backup IE favs into my new IE browser and they wont show up because they are hiden it shows it copied to the favs folder but in ie i cannot view them if that makes any sense.
I have Windows 7 Home premium. All of a sudden tonight my taskbar hides when I do anything else; web, apps, etc. It is not set to "auto-hide." What can I do to get it to stay visible all the time?
View 1 Replies View Relatedwhen i put in the usb hard drive,why cant show the device anything?
View 2 Replies View RelatedHow to show workgoups on windows 7 like My networkplaces in XP
View 1 Replies View RelatedOkay I'm SO close to having this fixed now... Long story short, my SSD got corrupted so I reformatted it and now I'm trying to reinstall windows on it. So I reformatted the SSD and it shows up fine now in disk management and My Computer, but when I go to install windows on it, it won't show up in the Install Windows screen. I went into disk management and made sure it showed up as "Active, primary partition" which was fine. But it still doesn't show up as an install option? I hate being this close and not being able to just install windows now. I already tried running it in AHCI and RAID and nothing works.
View 5 Replies View RelatedI just installed win xp though i also have win 7 in separate drive...and my problem is that i have not been able to log on to win 7 after installing xp....because os selection does not show win 7 but only win xp....
View 7 Replies View RelatedI am opening my lancard and opening properties but it is coming blurr on the screen means it is not showing properties as a link tell what i do for it.I want to access internet but this problem is persisting.
View 2 Replies View RelatedI started out thinking it was only an IE issue, but now I know I have something else going on. In applications using some unknown software, pictures do not display. This includes internet explorer and some other software also(H&R Block tax software for example). Strangely, I downloaded Chrome after I had the issue and it works flawlessly. The problem appears to be a windows based issue not an Internet Explorer issue. I have chased firewalls, anti virus software and checked boxes and nothing seems to be wrong.
View 3 Replies View Related