I built my own PC with 2 Crucial M4 64GB SSDs in a RAID 0 logical drive as the boot/Windows drive. Everything was fine for about eight months then yesterday I got a BSOD with the code 0x...F4. The machine automatically rebooted and a message about insert boot device came up. The RAID utility that comes up during post shows the Logical drive. I put in the Windows installation CD to try and repair but it doesn't detect an existing Windows installation. When I try the installation process, after adding the appropriate RAID drivers, the installer sees the drive so I think I could reinstall but I don't know how that would effect the data on the partition. I also have a logical data drive of two 2TB HDDs;if I reinstall on the SSDs will the data on those drives be lost? I also have an external drive that I had setup for Windows Backup; will I be able to access that after a reinstall? And my biggest concern is that if this happened once and I dont' know why, could it happen again? Maybe there is something wrong with the SSDs? I'm not sure how to troubleshoot this or how to proceed.
My Acer 7736Z-4809 laptop (pre-installed with Win7 Home Premium 64bit, so I don't have the Win7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked.
I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive." Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse).
Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.
I have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration. After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. "No signed Driver Found, Please insert CD/DVD/ Floppy", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.
After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed "during" the Windows installation. Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
I have tried to find the way to do this, but without success as I cannot see the wood for the trees.
I have a mature Windows 7 system, with so many applications loaded that rebuilding from scratch is just not an option. I have a 300MB Velociraptor wholly given over to the OS and another empty 300MB VR. I want to extend, that may not be the right word, my OS to use both disks in Raid 0.
I have Win 7 Pro 64 bit installed on an ASUS P7P55D LE motherboard which supports RAID 0,1,5 and 10 using Intel Matrix Storage Technology through an on board Intel P55 chip set. The system was assembled in Nov 2009 using two Western Digital Caviar Black 750Gb drives in RAID 1 as Drive C:. (I now know from Western Digital Customer Service that I shouldnt have done that, but lets move on from there). Last December, an error message informed me the RAID array was broken and identified one of the 750 Mb drives as needing replacement. I happened to have a spare 1.5Tb WD Caviar Black at the time, so I pulled the 750Mb drive and replaced it with the 1.5Tb drive. Life was once again good. Then on July 4th (wouldnt you know) there was a repeat of the December 2011 error message telling me to replace the other original 750Gb drive. Okay so I had another 1.5Tb WD Caviar Black laying around (dont ask) and did a similar swap out. Thats when I emailed WD Customer Support asking about the 750 since their diagnostic software said the drives were fine. Thats when I learned that I should be paying lots more for enterprise quality drives if I want/need RAID. Well thats not what ASUS says in their advertising, but live and learn. All thats prologue, because my real question is whether its possible to break the hardware-based RAID 1 array and set up a Windows 7-based RAID 1 with the two 1.5Tb WD Caviar Black drives without having to reinstall Windows 7.
I had one hard drive failed(640gb). I bought replacement and tried to restore image but it failed. Then I wanted to convert to non raid system. I changed both drives(640gb) to non raid and bios change in advance setup. I am getting error when I try to reinstall win 7, "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have deleted old partition many times but win 7 setup on this dell xps435 desktop won't install windows.
Which configuration would be better using mobo sats 2 raid or using seperate rid controller via pcie card Rosewill Rc-211 wsis3132) or should I use mobo for raid and card for extra sata w/o raid I have more drives than sata slots. How do I transfer data videos/Tv shows from existing drive to raid?
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
So the other day I logged on to my computer to find all my downloads gone and not reach able and the folder has a huge error something like File osociated cant be found. I have system restored to the previous today and it didnt work What do I do?
I amtryuing to reinstall windows 7 pro x64 on my desktop, but I have a raid 0 array setup. I had it installed on these before I had virus problems, now when I go to install it I cant seem to see the hdd's when in raid in bios, only when in ahci mode
I have W7 installed, works fine. I bought 2 HDDs and wanna add them just as data disk and set up as RAID1. If I set up RAID in bios, Windows crashes when loading with classic blue screen + restart. Is there any way to make it work (install some driver etc.) or do I have to reinstall Windows with RAID set up prior to Windows installation? I have Asus P7P55D-E board.
I had to move the hard drive that I installed W7rc on to a SATA port that is configured in the BIOS as a raid. Now it will not startup because it needs the raid driver installed.
How can I install that driver?
I have tried "Startup repair" and it tells me it can not fix the problem. I tried to do an upgrade and you all know what it said. Must boot into that os first then do the upgrade.
My PC is setup with two hard drives as RAID-0 (1 partition) and it has refused to boot Windows 7 for the past few days. The computer simply shows a black screen after it goes through the BIOS screens. Pressing F8 to enter Safe Mode does not work at all.This issue has arisen after I tried installing a video card (XFX Geforce 8800 GTX) without uninstalling my old video drivers. It's still a mystery to me how installing the card would cause problems with Windows or my hard drivesHere's what I've done so far to troubleshoot:I created a System Recovery boot disk because I lack the original Windows 7 installation cd. System Restore does not work, nor does the Image function. System Repair simply hangs for an unbelievable amount of time.
After scanning my hard drives for various info, I found out that my first hdd is listed as NTFS, yet my second one is RAW. Subsequently, the C: drive is also listed as RAW, and I cannot use Chkdsk.exe on it. Through a cmd prompt, I used Bootrec.exe /FixMbr and /FixBoot, but it did not seem to fix the issue. I also used Bootrec.exe /ScanOs to see if the Windows 7 installation still existed, yet it came up with nothing.I've managed to use a program called RAID Reconstructor, via a PE Builder boot disk, in order to copy all my hard drives' sectors over to my external hard drive. The external is now hooked up to a second PC that I'm using to troubleshootIt seems that all of my personal files are intact and working perfectly fine, and the file names are also correct. I don't really know how to check my Windows/System32 files for corruption.I'd like to fix Windows 7 without having to format the hard drives. Since I lack the Windows 7 installation cd, I can only install Windows XP while lacking 64-bit support. Since I'd like to avoid this, I was wondering if there was a way to get Windows 7 back up and running. But I suppose this isn't possible without getting my second hdd back to NTFS format.
I am currently using my motherboard's fakeRAID capability (AMD 890FX chipset) to create a RAID1 array (separate from my boot drive, of course). I was considering switching to a Windows 7 software RAID implementation, the idea being if I switched motherboards or addon cards I wouldn't have to recreate the RAID array (plus, I've heard that software RAID tends to be slightly better than fakeRAID at throughput and cpu load). However, one of my friends told me that, at least in previous versions of windows, RAID arrays created in win software were specific to that particular windows installation. So, if I lost my boot drive, I would lose my RAID array as well.if I create a software raid array in Windows 7 and later reinstall the operating system or move the array to another computer with the same operating system, would it still properly recognize the array?
I am running Windows 7 Professional 64-bit. I have a single 500GB hard drive, which contains 2 partitions. The first partition is about 265MB and contains Windows 7. The second partition contains Windows XP Professional 32-bit, as I occasionally need to boot into XP for some software development and testing.I would like to add a second hard drive, and use it to mirror the Windows 7 partition using Windows 7 software RAID 1, thus providing me with some protection should one drive fail. If I purchase another identical 500GB hard drive, and make a partition of the same size (265MB), will I be able to mirror my Windows 7 setup in the way intended, or can anyone foresee any problems or issues? I am NOT intending to mirror the Windows XP partition.
I'm trying to stripe two drives using the disk management tool. Both partitions give me the option to stripe them but when I use the wizard the other drive doesn't show up to allow me to raid to it! Both drives have partitions on them at the moment, but I was under the impression that this will make a raid partition rather than a drive.
what drivers should be better to use when installing Windows 7 on Raid 0. Should I use the drivers that comes by default in Windows 7 or should I download the Intel Matrix Storage Manager drivers?
I installed Windows 7 on a 20GB partition on a 2TB HDD for my PC on a AMD E-350 APU motherboard.
1) Can I use the other partition that doesn't have Windows 7 installed and RAID it with another empty HDD?
2) Will I be able to add another HDD down the road and add it to the RAID without erasing all my data without using a RAID Manager like Intel Rapid Storage?
If Yes: How can I do this?
If No: Is there a RAID Manager that I can use that will allow me to do this?
I have install xp on raid striped but when i try to install win 7 the driver i have are not the correct ones i have a dfi lanparty tu p45 t3rs mb and two wd 500gb hdd. i have looked around but cant find any others anything i can do or anone know where i can get driver
I am doing a quick windows build here on a couple of computers and want to RAID 1 the windows C drive. The motherboard i got for them does not support RAID (I kinda figured it would). So now i was thinking of just doing a software RAID in windows. I got the C drive to mirror each other in disk management but the issue seems to be booting. When the computer starts it asks which hard drive i want to boot from and when i simulate hard drive failure the boot manager doesn't come up at all and i am stuck with the no boot device error. My guessing is that there is something on the 100MB system partition that isn't copying over.
Im using one ssd as my boot drive for windows 7 but i dont know which way i should install it. i can either use AHCI or RAID and if i choose RAID i can specify either RST or RSTe. if i install AHCI, should i install intel's rst by loading the driver before installing windows 7 or install the rst driver after? same with RAID, should i install before or after?
I purchased 2 500gb hdd's for a raid 1 setup. I already have a 128gb SSD with my operating system that i plan to leave untouched. i simply want to install games onto the hard drives in raid 1.
I have an m5a99x evo motherboard by asus. My problem is that whenever i turn on the raid in bios, press control+f, and set the 2 drives in raid 1, windows 7 cannot boot. If i select the restore, i cannot access my system image from my external hard drive and it cannot solve the problem on its own.
I am having to do a clean install of Windows 7 Ultimate and would like to implement RAID 1 for data duplication afterwards. My CompTIA A+ textbook says RAID 1 is supported only by server OSs such as Windows Server 2003 and I wonder if Windows 7 Ultimate would support RAID 1. I am looking forward to receiving any advice.
I have two 1.5TB WD HDs that I am going to use soley for storage, these will not be for the OS drive. If I place them in a Windows 7 Software RAID 1 configuration, and say my main OS drive was to fail. I would have to rebuild my OS drive on a new HD. Now when I do this, will the new install of Windows 7 I do at the time pick up my previous Windows 7 Software RAID 1 for my storage drives or do I lose the array? I am scared that if I lost my OS drive, my R1 storage array would go as well if Windows 7 keeps some kind of settings or configuraiton to manage the array.
cant install windows 7 on raid 0 setup gateway dx4831 i3.installs fine with single hd..Using two 1tb wd caviar green hd's.configured raid under bios w/o problem..windows see's them as single hd upon installation but fails after restart error message. windows can not configure to run on your hardware?
Setup mb asus p6t6 ich10r (raid controller) 2 x vertex 30GB 2 x seagate 1.5TB in ( motherboards controller fakeraid ) raid 0 array Volume1 = 1 GPT partition with 1 windows dynamic simple volume ntfs formated (just 1 big ~3TB partition for storage created on a previous install of Windows 7)
Reinstall Window 7 on a vertex
Problem: After reinstall the raid array is not recognized by Windows 7 it asks me to initialize the disk (which is a raid volume). I say yes, then asks to create MBR or GPT i say GPT. But then it says the disk is unallocated and wants me to create a new dynamic volume, i say simple volume. But now is asking to format... and here i stopped, with out formating to new ntfs.
Questions: Is there a way to recuperate / restore / reinstate / recover / rescue / rebuild .... the old dynamic ntfs simple volume ? So that i could access the data without having to use a data recuperation program for 3TB of data.
Will a quick ntfs format and a scan-disk make that possible?
