Driver Not Found For Windows 7 Install
May 23, 2011
I also have a Liteon ihas424 98B DVD writer, that win7-64 will not recognize during install (but it reads the win7 install DVD..) Installed win7-32 and all is fine. Used PLDS smartpack utility to update the DVD firmware, to latest level. Ran twice, 2nd time no update. rebooted to win7-64 install dvd, win7-64 install still pops error right before unpacking files, CD/DVD driver missing... I gotta say huh? win7-32 has the driver, 64 does not?I will try to find another win7-64 install dvd.
View 4 Replies
ADVERTISEMENT
Jul 26, 2010
This was my first time building a computer and everything went smoothly until the Windows 7 64bit installation. Right after the installation starts, a box pops up that says a "Required CD/DVD drive driver is not found" and that I can take out my Windows CD to install the driver. My CD/DVD drive is a LiteOn iHAS424-98 and the manual says that it should be ready for installation with Windows 7 without any drivers. The drive did come with a CD for Nero 9 and drivers/manuals, but when I put that CD in at the appropriate time, it still says no drivers are found. I looked at reviews for the drive on newegg and most of them said their installation went smoothly, but a couple seemed to have similar problems. However, each time they seemed to be caused by different things. I do not have another copy of Windows so I am trying to find solutions other than buying another copy. I'm not sure what's going on with it.
View 8 Replies
View Related
Aug 2, 2010
I have an ASUS Motherboard M4A87TD EVO, got two new hard drives, and changed the BIOS settings to a RAID configuration. After exiting BIOS, I loaded the WIN 7 (64 bit) installation disc, got thru the first few prompts of installation, and the pop up error menu shows up. "No signed Driver Found, Please insert CD/DVD/ Floppy", and my RAID configuration does not appear in the box as a hard drive for Windows to be installed into.
After researching on the web and contacting ASUS, I still don't understand. From what I can gather, it is a driver that will make THE INSTALLATION PROCESS RECOGNIZE MY RAID configuration. Apparently, it must be downloaded onto a thumbdrive and installed "during" the Windows installation. Is it specific to this type of installation, or manufacturer specific? Asus or Windows? A third party??
View 3 Replies
View Related
Jul 16, 2012
I recently bought a new Sata 3 Hard Drive (500gb Sata 3 Barccuda) for my PC. I've downloaded countless Windows 7 ISO's. I have a LEGIT key. After burning it on ImgBurn, Nero and Poweriso at 4x and 3.5 (Can't go lower than 3.5) It gets to the Language setup after 30minutes or so, Than a futher hour to get to driver selectio, but once on driver selection it tells me "No device driver found", I've tried lots of seperate ISO's and even Vista!
SPECS
Mobo: Ga-Ma770-Ds3
CPU: AMD 6000+ 3.01ghz X2 Dual core
RAM: 1gb x 4 (4gb)
GPU: Nvidia Geforce 550TI 1gb
View 2 Replies
View Related
Aug 12, 2011
I have bought an Acer Aspire One a751h with an integrated 3G modem. I received it with a fresh install of Windows 7 and I cannot get the integrated 3G modem to work. I click on the Acer internet manager and it says the modem is not found. The 3g switches on fine and it's lit up so all ready to use but it cannot find the modem. What I need to install and add instructions on what I need to do because I've downloaded several drivers to try and none have worked, although I must admit I'm not sure what to do once they are extracted from a zip file?
The info on the side of the box is as follows:-
A0751h - 52BGk MODEL NO: ZA3
CPU: Intel Atom Processor Z520
RAM: 1GB DDR2 STORAGE 160GB
Operating System:- Windows 7 Ultimate Service Pack 1
Installed Memory (RAM): 2.00 GB
System type: 32-bit Operating System
View 3 Replies
View Related
Oct 30, 2011
my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
View 8 Replies
View Related
Apr 19, 2011
So im trying to install Windows 7 on my computer. Im curently running off of XP. When i try to install Windows 7 it says it cannot find any drive to upload to. When i click on my hard drive it doesnt recognize it.
View 1 Replies
View Related
Oct 17, 2012
I recently bought a new Sony VAIO T series ultrabook. The windows 7 that came with it had lots of bloatware on it so I am trying to install a clean version of win7. The problem is, when it gets to the "Where do you want to install Windows" dialog box, nothing shows up. Things I've tried:1. tried to change sata controller from IDE to AHCI, but BIOS does not have such setting.2. diskpart, drive does not even show up in diskpart. **I would like to add that if I run diskpart while in windows, the disk shows up, but when I run the command in the windows set up, it does not show up, the command line begins with X and not the usual C. Also, diskpart while in windows set up does not recognize my computer name, which is set as Larry. It shows it as MINIMUT...
View 17 Replies
View Related
Jul 10, 2011
Tolerance here, new to the forums as some of you may notice. Anyways I'm trying to install Windows 7 ultimate package on a PC that previously had Windows Vista. I've already ran the Windows Adviser program, and my PC seems fine so i went ahead and tried to install. First i tried using a burned ISO file to a DVD, with this i made my primary boot device the DVD drive, and my setup started normally. But after i selected the language, then a custom installation, and was directed to select the driver in which Windows 7 would be installed on i would get an error that reads, No device drivers were found. Make sure the installation media contains the correct drivers then click OK."
I've browsed these forums looking for someone with similar problems, and i did find them, and a lot of the threads were really annoying seeing as how so many people decided to reply with long irrelevant comments. Based on the answers from those threads I've tried burning the ISO file with a different burner (which was suggested often), but still with no prevail. So i was wondering if there was a problem with my system, or maybe my C: drive.
View 8 Replies
View Related
Jan 29, 2012
I have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
View 6 Replies
View Related
Oct 22, 2012
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies
View Related
Jul 25, 2012
I built a new computer yesterday and when it came to installing Windows 7 it says no drivers found. Everything is hooked up properly, but I'm not sure how to fix this. Not sure if my specs will help, but here they are.
asus sabertooth z77
evga nvidia gtx 670
corsair hx750w
i5 2500k
8gb corsair vengeance
corsair force series gt 120gb ssd
View 3 Replies
View Related
Jan 14, 2013
I'm trying to install windows 7 for my boss. Had no problem on the last computer. Now this one is giving me an error message that reads:
The procedure entry point W could not be located in the dynamic link library KERNEL.32.dll.
View 2 Replies
View Related
Sep 28, 2011
[code] So I get the Comp built, and did not have a windows iso yet, so I put Ubuntu 11.04 on it. When I tried to put on Windows 7 64-bit, via live USB, I get to the Install Windows button (very early in the process), before it gives me the error LOAD DRIVER: No device drivers were found. Make Sure the installation media contains the correct drivers, and then click OK.So I can browse for drivers, and I have downloaded the Windows drivers for the Sata and AMD 970 chipset from Gigabyte, but the install windows screen does not pick them up. I hit browse and then find the folder i saved them in and hit ok, yet it finds nothing.My bios have been changed from AHCI to IDE with no luck.
View 1 Replies
View Related
Nov 17, 2012
driver corrupted on my printer windows 7
View 1 Replies
View Related
Jan 28, 2013
i have a presario 2500 and i try to install win7.After the installation starts i get to a screen when the hdd is not found and asks for drivers.What drivers should i load and how? in order for win7 to find hard disk and start installing?
is there any iso dvd disk which has these drivers preloaded?
View 5 Replies
View Related
Jan 8, 2013
I'm trying to install Windows 7 64 bit on a newly built PC; All pieces are brand new. While trying to install Win 7, I get past a couple of screens then I get stuck at a "Select the driver to be installed." screen. Whenever I click on any of the drives showing up I get an error message that says Load Driver "No signed device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK."
I have the bios set to boot from CD/ROM first, Hard disk second, and USB third. The bios reads the hard drive as the correct 1 TB that it is. The "OnChip SATA Type is [Native IDE]." I have checked and double checked that things are plugged in correctly, but do tell me if its still possible I did something wrong. I have also tried booting with a copy of Windows XP that I had laying around but that gave me an error about "unable to partition drive."
View 25 Replies
View Related
Nov 26, 2010
I have a computer that came with windows 7 home pre-installed. After the 1st month's trial period we decided to install windows 7 enterprise. [code] Second problem is that the windows cannot be installed since the right driver cannot be found. Using the windows software we first disinstalled the initial windows 7 home editions and followed the next steps to install the new windows 7 enterprise version.After finishing the language set up a new box comes up to "select the driver to be installed".Whatever I do, the programme cannot find right driver.I got the necessary driver from the company that configured the computer, but the systems does not recognise it. I have tried to check the BIOS set up, and it appears to be alright...., though I am not really an expert. Which driver should I use in this case?Is there some set up change to consider before installing windows 7?
View 9 Replies
View Related
Oct 12, 2012
Few days back I tried to connect internet in my PC, said that "windows cannot found driver for your network adapter? Please install or upgrade your driver".
View 2 Replies
View Related
Jan 10, 2013
Sound driver not found dc 7600 for windows 7
View 1 Replies
View Related
Jan 7, 2013
Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were "check if your hd is listen in bios".So, i IS listed in bios but I can't reinstall windows nor access it
View 1 Replies
View Related
Dec 5, 2011
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies
View Related
Jun 27, 2012
I have installed WINDOWS 7 (Lisenced) in HP-Laptop. After that i can install all drivers. Then i can use all USB drivers. I am using 3 USB regularly. Then I installed VMware 7. Now I cant use all USB drivers except 3 drivers. While connecting, It scanning "Searching Windows Update" then it shows the error "No driver found".
View 1 Replies
View Related
Dec 12, 2011
To start, I had Windows 7 Home Premium x64 installed with internet connectivity working perfectly. I decided to place ultimate x64 version on, but now there is no network adapter, no drivers to be found. I really don't even know where to start with getting this fixed. And for some reason two copies of windows 7 appear on start up despite both versions being the same - ultimate x64 editions.
View 2 Replies
View Related
Dec 31, 2011
I have a digital download verson of Windows 7 Pro64 that i am trying to install over my Vista Home premium 32 install. I have burned the contents of the download to a DVD, however when i try to boot to the DVD it says BOOTMGR is missing. The file structure is the same on the 7 DVD as it is on the Vista disk, and both have BOOTMGR on the top of the Disk.I do have hardware that supports 64bit, and i can boot from the Vista CD, so i think the issue is with the burnt 7 Disk.
View 2 Replies
View Related
Jul 10, 2011
When I click "install now", I get a msg box that is saying 'no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK'.
View 9 Replies
View Related
Sep 20, 2009
I've been searching for an our or so all over trying to find something that helps me with this problem, but nothing seems to be working. I have an HP dv6780se Pavillion Laptop.
I put a new hard drive in it to restore and the restore disks are working correctly. It will install windows vista, but then when it starts installing all the bloatware the computer restarts and says OS not found.
So, I figured I'd install windows 7 since I was planning on doing it anyway.
My problem now is that I'm wondering since restore disks only install vista and don't finish the other hp stuff that the drivers aren't getting installed for vista...hence when I try and do a clean install of Windows 7 it says no drivers found. Any idea what I can do to get my install going?
View 9 Replies
View Related
Jan 1, 2013
My computer, a HP Pavilion with Windows 7, can't install my old deskjet 710c It is connected with a cable with on one side a USB plug en on the other side the old parallel connector for the printer.If I put the USB plug into the computer Windows update starts to find the printerdriver and that's the point where things go wrong.In the end it says no printer found.
View 1 Replies
View Related
Jan 15, 2013
My laptop is from Toshiba, model L650 PSK1JA OK3017. Here's Toshiba's driver page for my device: Support :: Toshiba ::Computers, Laptops/Notebooks, Tablets, Televisions, DVD and Blu-Ray Players, Camcorders, Storage, Accessories, and moreI recently purchased a blank hard drive along with a copy of Windows 7 Ultimate 64 bit. I've installed all drivers listed on the page for a 64 bit system but when I try to install the "Intel Wireless LAN Driver (For Intel Model Only)" driver or Proset driver, the driver extraction begins, ends, but when the setup is meant to run, nothing happens. I've redownloaded it and attempted to install it twice to no avail.Basically, I cannot connect to the internet and Windows cannot detect my network adapterI can't call Toshiba support because their operating hours are when I'm at school.casionally, when I try running the driver I mentioned before and the extraction is complete, when I select "No" as to whether I want to run the file, Windows gives me the error: "Archive Extractor -- Error occured in system module [-135]".
View 1 Replies
View Related
Mar 6, 2011
im having problem with my lan driver.im using Asus M4A78TD V-EVO mobo in Windows 7 2bit.Yestereday i cant connecting internet and found my driver was not found. Im uninstall and reinstall the driver but this error keep pop up"Realtek Network Controller was not found. If deep sleep mode is enabled, Plug in Cable" googling found there a trick such put out RAM, Gpu card and reset the CMOS..and it not work.inbefore i've flashed bios to v.2005..then im update bios to 2105 but still same problem occur.i try to flash to manufacture bios but cant due latest version is installedalso put D-Link DFE-520TX network card..there a green light in my modem which i assume the adapter was detected.but in device manager there no network adapter after installing the driver.Do manual installing same thing happened
View 1 Replies
View Related
Mar 14, 2012
Gateway DX4300 running Windows 7 home preimum. CD drives are in device manager but with yellow ?. Driver cannot be found. Windows 7 trouble shooter cannot solve problem. Problem is present on external CD and internal CD.
View 2 Replies
View Related