No Drives Found In Windows 7 Install
Oct 30, 2011
my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
View 8 Replies
ADVERTISEMENT
Jan 29, 2012
I have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
View 6 Replies
View Related
Oct 22, 2012
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies
View Related
Jan 2, 2012
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]
View 9 Replies
View Related
Sep 26, 2012
No partition appear when i install win 7 in my system.
View 1 Replies
View Related
Dec 22, 2010
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
View 4 Replies
View Related
Jan 26, 2012
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
View 3 Replies
View Related
Nov 6, 2012
Its my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies
View Related
Aug 11, 2011
i've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies
View Related
Sep 20, 2011
No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
View 14 Replies
View Related
Dec 27, 2010
I'm trying to install windows 7 32bit from a "family pack" upgrade disk (home premium) that I bought like a few hours ago. The disk definitely isn't scratched or dirty.I have a similar problem, that is, when I get to the part where I am supposed to find the drive to install it on (in this case my /C drive) it shows nothing (the list of drives is empty).I bought this computer used and it has a non genuine version of windows 7 (32bit professional)(so I know the computer is able to run windows 7) but I have been having some troubles with that (randomly restarting) so I decided to install a genuine copy of windows 7.
View 3 Replies
View Related
Feb 14, 2010
Well, unfortunately I have a serious problem. To go ahead and get this over with.I'm not sure what kind of drives they are..GParted failed to boot [ "BootMGR is missing"] Anyway to figure this out?I'm installing via USB, due to me not currently having the disc.The USB is bootable 100%.
My problem is that Windows 7 does not recognize any of my drives. Nor do I know what kind of drivers to get.Before I tried booting with the USB, it told me that a OS was not found.
View 2 Replies
View Related
Apr 23, 2011
Suddenly I cannot open my DVD drives. I get an error message that says cant find the path or you do not have permission. I have googled the problem and tried various fixes to no avail. They are shown as working ok in device manager.
View 7 Replies
View Related
Sep 18, 2012
I have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies
View Related
Nov 23, 2011
I have three external drives, and every time I boot now, they show up as "found," as if I'd just put in a USB drive.....meaning I have to close them all each and every time. Not a serious issue, just an annoyance I'd like to avoid. How can I set it so that they are not "found" each time?
View 6 Replies
View Related
Dec 5, 2011
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies
View Related
Aug 12, 2011
I have bought an Acer Aspire One a751h with an integrated 3G modem. I received it with a fresh install of Windows 7 and I cannot get the integrated 3G modem to work. I click on the Acer internet manager and it says the modem is not found. The 3g switches on fine and it's lit up so all ready to use but it cannot find the modem. What I need to install and add instructions on what I need to do because I've downloaded several drivers to try and none have worked, although I must admit I'm not sure what to do once they are extracted from a zip file?
The info on the side of the box is as follows:-
A0751h - 52BGk MODEL NO: ZA3
CPU: Intel Atom Processor Z520
RAM: 1GB DDR2 STORAGE 160GB
Operating System:- Windows 7 Ultimate Service Pack 1
Installed Memory (RAM): 2.00 GB
System type: 32-bit Operating System
View 3 Replies
View Related
Apr 19, 2011
So im trying to install Windows 7 on my computer. Im curently running off of XP. When i try to install Windows 7 it says it cannot find any drive to upload to. When i click on my hard drive it doesnt recognize it.
View 1 Replies
View Related
May 23, 2011
I also have a Liteon ihas424 98B DVD writer, that win7-64 will not recognize during install (but it reads the win7 install DVD..) Installed win7-32 and all is fine. Used PLDS smartpack utility to update the DVD firmware, to latest level. Ran twice, 2nd time no update. rebooted to win7-64 install dvd, win7-64 install still pops error right before unpacking files, CD/DVD driver missing... I gotta say huh? win7-32 has the driver, 64 does not?I will try to find another win7-64 install dvd.
View 4 Replies
View Related
Oct 17, 2012
I recently bought a new Sony VAIO T series ultrabook. The windows 7 that came with it had lots of bloatware on it so I am trying to install a clean version of win7. The problem is, when it gets to the "Where do you want to install Windows" dialog box, nothing shows up. Things I've tried:1. tried to change sata controller from IDE to AHCI, but BIOS does not have such setting.2. diskpart, drive does not even show up in diskpart. **I would like to add that if I run diskpart while in windows, the disk shows up, but when I run the command in the windows set up, it does not show up, the command line begins with X and not the usual C. Also, diskpart while in windows set up does not recognize my computer name, which is set as Larry. It shows it as MINIMUT...
View 17 Replies
View Related
Jul 26, 2010
This was my first time building a computer and everything went smoothly until the Windows 7 64bit installation. Right after the installation starts, a box pops up that says a "Required CD/DVD drive driver is not found" and that I can take out my Windows CD to install the driver. My CD/DVD drive is a LiteOn iHAS424-98 and the manual says that it should be ready for installation with Windows 7 without any drivers. The drive did come with a CD for Nero 9 and drivers/manuals, but when I put that CD in at the appropriate time, it still says no drivers are found. I looked at reviews for the drive on newegg and most of them said their installation went smoothly, but a couple seemed to have similar problems. However, each time they seemed to be caused by different things. I do not have another copy of Windows so I am trying to find solutions other than buying another copy. I'm not sure what's going on with it.
View 8 Replies
View Related
Jun 17, 2012
So, I just built my first computer, components below:[CODE]Anyways, I restared the installation, but this time, I got the "No drives were found. Click load driver to provide a mass storage driver for installation." message. I looked up the solution and checked the BIOS, when, to my surprise, I could not find the SATA connection to my HDD.
View 9 Replies
View Related
Nov 7, 2009
i have just assembled a new computer, and i am attempting to perform a custom install of windows 7. however, i am getting an error message saying that no drives were found. i have a brand new seagate 7200.12, which shows up in the bios and will pass tests in SeaTools.
View 9 Replies
View Related
Jul 10, 2011
Tolerance here, new to the forums as some of you may notice. Anyways I'm trying to install Windows 7 ultimate package on a PC that previously had Windows Vista. I've already ran the Windows Adviser program, and my PC seems fine so i went ahead and tried to install. First i tried using a burned ISO file to a DVD, with this i made my primary boot device the DVD drive, and my setup started normally. But after i selected the language, then a custom installation, and was directed to select the driver in which Windows 7 would be installed on i would get an error that reads, No device drivers were found. Make sure the installation media contains the correct drivers then click OK."
I've browsed these forums looking for someone with similar problems, and i did find them, and a lot of the threads were really annoying seeing as how so many people decided to reply with long irrelevant comments. Based on the answers from those threads I've tried burning the ISO file with a different burner (which was suggested often), but still with no prevail. So i was wondering if there was a problem with my system, or maybe my C: drive.
View 8 Replies
View Related
Jul 25, 2012
I built a new computer yesterday and when it came to installing Windows 7 it says no drivers found. Everything is hooked up properly, but I'm not sure how to fix this. Not sure if my specs will help, but here they are.
asus sabertooth z77
evga nvidia gtx 670
corsair hx750w
i5 2500k
8gb corsair vengeance
corsair force series gt 120gb ssd
View 3 Replies
View Related
Jan 14, 2013
I'm trying to install windows 7 for my boss. Had no problem on the last computer. Now this one is giving me an error message that reads:
The procedure entry point W could not be located in the dynamic link library KERNEL.32.dll.
View 2 Replies
View Related
Sep 28, 2011
[code] So I get the Comp built, and did not have a windows iso yet, so I put Ubuntu 11.04 on it. When I tried to put on Windows 7 64-bit, via live USB, I get to the Install Windows button (very early in the process), before it gives me the error LOAD DRIVER: No device drivers were found. Make Sure the installation media contains the correct drivers, and then click OK.So I can browse for drivers, and I have downloaded the Windows drivers for the Sata and AMD 970 chipset from Gigabyte, but the install windows screen does not pick them up. I hit browse and then find the folder i saved them in and hit ok, yet it finds nothing.My bios have been changed from AHCI to IDE with no luck.
View 1 Replies
View Related
Nov 17, 2012
driver corrupted on my printer windows 7
View 1 Replies
View Related
Jan 28, 2013
i have a presario 2500 and i try to install win7.After the installation starts i get to a screen when the hdd is not found and asks for drivers.What drivers should i load and how? in order for win7 to find hard disk and start installing?
is there any iso dvd disk which has these drivers preloaded?
View 5 Replies
View Related
Apr 30, 2010
I have a HP Pavilion dv9800. It came with Vista and one 250 GB HDD. I added a second internal 250 GB SATA HDD. I got the second drive formatted and so it showed as a second drive where the HHDs are displayed. I didn't have any Vista OS software on it (to my knowledge, as far as I could see) but I could use the drive for extra storage, etc.I went to add Windows 7 with an install disk. I would like to simply replace Vista with Windows 7 and have the second HDD usable as extra space, so it would serve the same function as it has with Vista. However, when I used the install disk it asked me which drive I wished to install Windows 7 on. I installed it on on the second HDD only, so now I'm running Vista on the C: drive (and it's on D: Recovery too) and Windows 7 on the drive added second. can I replace Vista on C: (and D) and then use the other added HDD for storage, etc? In other words, I want only Windows 7 OS on this machine, but want to be able to use both drives, with a similar configuration as I had with Vista.
View 4 Replies
View Related
Mar 8, 2011
install two hard drives using windows 7
View 1 Replies
View Related
