No Drives Were Found
Dec 27, 2010
I'm trying to install windows 7 32bit from a "family pack" upgrade disk (home premium) that I bought like a few hours ago. The disk definitely isn't scratched or dirty.I have a similar problem, that is, when I get to the part where I am supposed to find the drive to install it on (in this case my /C drive) it shows nothing (the list of drives is empty).I bought this computer used and it has a non genuine version of windows 7 (32bit professional)(so I know the computer is able to run windows 7) but I have been having some troubles with that (randomly restarting) so I decided to install a genuine copy of windows 7.
View 3 Replies
ADVERTISEMENT
Sep 20, 2011
No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
View 14 Replies
View Related
Feb 14, 2010
Well, unfortunately I have a serious problem. To go ahead and get this over with.I'm not sure what kind of drives they are..GParted failed to boot [ "BootMGR is missing"] Anyway to figure this out?I'm installing via USB, due to me not currently having the disc.The USB is bootable 100%.
My problem is that Windows 7 does not recognize any of my drives. Nor do I know what kind of drivers to get.Before I tried booting with the USB, it told me that a OS was not found.
View 2 Replies
View Related
Oct 30, 2011
my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
View 8 Replies
View Related
Sep 26, 2012
No partition appear when i install win 7 in my system.
View 1 Replies
View Related
Jan 29, 2012
I have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
View 6 Replies
View Related
Dec 22, 2010
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
View 4 Replies
View Related
Jan 26, 2012
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
View 3 Replies
View Related
Oct 22, 2012
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies
View Related
Nov 6, 2012
Its my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies
View Related
Aug 11, 2011
i've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies
View Related
Apr 23, 2011
Suddenly I cannot open my DVD drives. I get an error message that says cant find the path or you do not have permission. I have googled the problem and tried various fixes to no avail. They are shown as working ok in device manager.
View 7 Replies
View Related
Sep 18, 2012
I have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies
View Related
Jan 2, 2012
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]
View 9 Replies
View Related
Nov 23, 2011
I have three external drives, and every time I boot now, they show up as "found," as if I'd just put in a USB drive.....meaning I have to close them all each and every time. Not a serious issue, just an annoyance I'd like to avoid. How can I set it so that they are not "found" each time?
View 6 Replies
View Related
Dec 5, 2011
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies
View Related
Jun 17, 2012
So, I just built my first computer, components below:[CODE]Anyways, I restared the installation, but this time, I got the "No drives were found. Click load driver to provide a mass storage driver for installation." message. I looked up the solution and checked the BIOS, when, to my surprise, I could not find the SATA connection to my HDD.
View 9 Replies
View Related
Nov 7, 2009
i have just assembled a new computer, and i am attempting to perform a custom install of windows 7. however, i am getting an error message saying that no drives were found. i have a brand new seagate 7200.12, which shows up in the bios and will pass tests in SeaTools.
View 9 Replies
View Related
Jan 1, 2013
I just got a brand new computer for christmas, it's a hp compaq dc5850, and it was working fine until now! I tried turning the computer on and it got stuck at the blue hp invent screen, I didn't know what to do, so I finally decided to just try and restore it. When I try to use the windows 7 disc to do this it keeps saying "no drives were found. Click to load driver to provide a mass storage driver for installation".
View 1 Replies
View Related
Sep 14, 2012
as usual I turned off my laptop and after a while a turned on again to use my laptop but it couldn't reach operating system and showed error : " OPERATING SYSTEM NOT FOUND" !
I tried all instructions to solve the problem and finally run by windows start up CD to re-install new windows. this time I faced error: " No drivers were found. click load driver to provide a mass storage driver for installation"
View 1 Replies
View Related
Aug 26, 2011
So the other day I logged on to my computer to find all my downloads gone and not reach able and the folder has a huge error something like File osociated cant be found. I have system restored to the previous today and it didnt work What do I do?
View 2 Replies
View Related
Jul 21, 2011
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies
View Related
May 30, 2011
am trying to do a backup of my Win 7 system drive (C, but the backup utility is saying that it must backup by non-system drives (E: and H, which happen to have "System Volume Information" folders on them. They are not system drives. E: is my main utilities drive and H: is my games drive.Somehow, Windows thinks they are system drives, when in reality they aren't.Any ideas on how to change them? When I go in to Disk Management, they are not showing as system drives. They are all partitions on the same hard drive, but there are other partitions not included in the backup.
View 3 Replies
View Related
Feb 19, 2011
I have a new laptop NV55C with windows 7 & 3 GB DDR3 memory 500 HD. Intel Pentium P6200.I get an email from a website I have belonged to for many years, & when I click on the link it says waiting on website, then web site not found. There is a information link to click on and it says to check the web address and A DNS and the web address might be wrong.I can move over to my wife's PC access my account click on the email link without any problems. Also some pictures do not show up in emails only a red x. What should I do?
View 1 Replies
View Related
Apr 27, 2011
I had a malware/spyware problem and used antisuperspyware to fix it but after deleting the detected files now I cannot open any .exe file directly when I try it gives me application not found error or which of the following programs u want to use to open the file ,I cannot even open IE or firefox ,what should I do?
View 1 Replies
View Related
Feb 4, 2013
I open a a mail contain virus.after that when I insert a dvd into DVD RW drive it does'nt open it & said application not found.
View 2 Replies
View Related
Jul 21, 2011
well the problem is i went to my friend today after a long night trying to fix the problem from the first thread which didnt work and everything was okay since then, thats the last time i touched the computer and when i was at my friend's house i wanted to download an mp3 and didnt figure out why it downloads it perfectly but then i saw on the firefox download statusbar "file size: file not found" so i checked my desktop and found the file which was named like it should be only at the end was ".part" which as i know is the temp file being downloaded. i tried changing its name to .mp3 and it didnt work, i also tried refreshing the desktop which made the file disappear! now im at my home again and i tried to download it again assuming my friend's router was maybe malfunctioning but the same thing happens now at my place.what is wrong with my new computer?!i googled the problem and found out that memtest would let me see if my ram is the problem. i downloaded memtest which doesnt work on my win 7 coz its 64 bit and memtest doesnt support it at all.
View 5 Replies
View Related
Mar 18, 2012
i am currently using a windows 7 hp laptop, But for some odd reason when i plug in my RCR microphone it will just not work.Yes i can hear everything fine but instead of capturing my voice through the RCR mic. It instead captures it through the laptop mic. Whenever i unplug the rcr mic then the laptop mic will stop being in use. When i plug in my RCR mic it uses the laptop mic and when i unplug the mic its doesnt use the laptop mic anymore.i also cheaked the recording deviced could not find my mic, just the computers.
View 4 Replies
View Related
Nov 21, 2012
My hard drive recently died in my laptop. I have had it replaced and downloaded Windows 7 iso from Microsoft Dreamspark (as i am a student) and burned it to a CD. I have booted from the cd but it is keeps coming up saying "Windows Failed to start. A recent hardware ir software change might be the cause.File:windowssystem32ootwinload.exeStatus: 0xc0000001 Info: The selected entry could not be located because the application is missing or corrupt
View 1 Replies
View Related
Jun 23, 2011
just installed a new game on my computer, but upon starting, the game crashes because Xinput9_1_0.dll is not found. What can I do to rectify this? I've tried installing the newest version of DirectX and reinstalling the game. Neither fixed the problem.
View 3 Replies
View Related
Aug 17, 2011
My system is a dell Studio XPS 435MT running W7. I just replaced the motherboard. Everything is working fine except the Boot is taking forever. It is getting stuck prior to windows loading and saying " PXE-E53" No Boot file found. In my research this has something to with the system trying to boot from the LAN.
View 12 Replies
View Related
