I have three external drives, and every time I boot now, they show up as "found," as if I'd just put in a USB drive.....meaning I have to close them all each and every time. Not a serious issue, just an annoyance I'd like to avoid. How can I set it so that they are not "found" each time?
View 6 Replies
i've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies View RelatedI plug quite a few different hard drives into my PC running windows 7 VIA a usb 3.0 Nexstar SATA adapter, normally just bare hard drives that need data backed up or moved, and as time goes on it seems to get slower and slower to find and bring up a new drive when i bring it in. My assumption is that it caches all the drivers for each drive and searches them to see if a matching driver is already installed for that specific device, or something of the nature. I had thought the 2-5 minute wait when plugging in a hard drive was just how W7 operates but apparently this is not the case according to some other tech savvy people i've talked to. Other USB devices such as flash drives don't take nearly as long to come up as a SATA I could clean out so as to get the process back onto a fresh leg.
View 6 Replies View Relatedhow can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedMy Windows 7 PC is in "Hibernate" most of the time and I rarely restart it. I would like to do what most people are trying to avoid: I would LIKE TO have a chkdsk run on all drives every time I boot. Is there an easy way to do this? Further, might there be any way to distinguish between "this chkdsk is being run because you want it run every time" vs. "the chkdsk is being run because the dirty bit is set (you had a problem)"?
View 7 Replies View RelatedI've just had a new mother board installed in my tower, now it's a Pent 4 3.4g. I used to have my two external HDD's connected to the old system configuration but now at startup, when it gets to Auto-Detecting External HDD's it takes for ever to do anything. I have to unplug them, then do a reboot and all is fine, but then have to plug them back in again.
I know from reading some post's that it's in the BIOS startup sequence but I'm not quite sure where and what to change in the startup.
In the BIOS Boot Device Priority I have: 1st - Floppy Drive, 2nd - [3M-ST3200800AS], 3rd - [ATAPI CD-ROM], 4th - [Disabbled].
Long story short, I have shares on three PCs that are not always on. If I make a shortcut to the share and put it on my desktop, sometimes for some reason, the shortcut vanishes. I believe this is because I haven't connected the PC to the network in a while.
So, I went about and mapped those shares to drive letters. All is well, however, it adds another 45 seconds to my boot time.
Pretty sure this is because windows is trying to reconnect to them on boot, but they are disconnected. Is there any way to keep my drive mappings, but not have windows attempt to reconnect on boot?
I know that you will lose your mappings if you do not check "reconnect on login".. so, is there a way to keep the mappings without attempting to reconnect at login?
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]
View 9 Replies View RelatedI just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies View RelatedNo drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
View 14 Replies View RelatedI'm trying to install windows 7 32bit from a "family pack" upgrade disk (home premium) that I bought like a few hours ago. The disk definitely isn't scratched or dirty.I have a similar problem, that is, when I get to the part where I am supposed to find the drive to install it on (in this case my /C drive) it shows nothing (the list of drives is empty).I bought this computer used and it has a non genuine version of windows 7 (32bit professional)(so I know the computer is able to run windows 7) but I have been having some troubles with that (randomly restarting) so I decided to install a genuine copy of windows 7.
View 3 Replies View RelatedHow can i stop windows 7 from installing a preconfiguredriver for my video card. I want to install my own driver for my video card but windows detects it and installs their own preconfigure driver.
View 14 Replies View RelatedWell, unfortunately I have a serious problem. To go ahead and get this over with.I'm not sure what kind of drives they are..GParted failed to boot [ "BootMGR is missing"] Anyway to figure this out?I'm installing via USB, due to me not currently having the disc.The USB is bootable 100%.
My problem is that Windows 7 does not recognize any of my drives. Nor do I know what kind of drivers to get.Before I tried booting with the USB, it told me that a OS was not found.
my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
No partition appear when i install win 7 in my system.
View 1 Replies View RelatedI have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies View RelatedIts my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies View RelatedI have got an HTPC/Server that has a lot of hard drives in it. The OS is run off a SSD and of all the hard drives, the one that really gets used is 1.5TB WD drive for recording of the television.
I have set Windows up so it turns off hard disks off after 20 minutes if they are not being used which is fine, but my problem is that my computer automatically goes into Sleep Mode (S3 hybrid sleep) when it is not recording anything and when it wakes up all the hard drives spin back up.
Is there any way to keep hard drives spun down even when resuming from sleep?
Suddenly I cannot open my DVD drives. I get an error message that says cant find the path or you do not have permission. I have googled the problem and tried various fixes to no avail. They are shown as working ok in device manager.
View 7 Replies View RelatedI have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies View Relatedso lately ive been getting BSOD all the time,i cant play a game more than 15 min before i get BSOD, and when im surfing it takes a little bit longer but after an hour or two of doing NOTHINg on the computer, i still get bluescreen. i dont know what to do, i think its the graphic card that is messing with me. because if i touch it, i almost get burnt, its really hot. error code is stop: 0x00000124 (0x0000000000000000, 0xfffffa8007c9c028, 0x00000000f2000000, 0x00000000002008f) ive never posted here, nor do i know alot about this
View 3 Replies View RelatedI like to keep my BIOS time set to UTC, which works perfectly with Linux, but whenever I log into Windows, the displayed time is UTC even though I have set the timezone. When I change the time manually or with synchronization, it changes BIOS time itself instead of simply using it as a base for localtime.
View 3 Replies View Relatedi've a toshiba satellite A300-1C9 and it was time to change the battery so i've bought a new one the brand 2-power 6600mAh, but Windows 7 can't find the battery? if i unplug the ac the battery works GREAT but i can't see the percentage and time leftwhen i plug the ac back in it says "on ac - but no charging"
View 9 Replies View Relatedim going to install an ssd (and run windows 7 from it) and would like to be able to keep my old hard drive with (exsisting windows 7 installation) for a few days till i sort out what i want to copy.if i select the ssd as the boot drive then i should be able to look around in the old hard drive?? or am i wrong
View 7 Replies View RelatedMy desktop is currently running into an issue where it will crash (BSOD) at random times doing just about any program, the screen will basically become jumbled up/turn into Lines for a second and then BSOD to the Stop Error. I have included the Minidump file, JcGriff File, and Health and systems report as per the BSOD posting instructions. My Basic system Specs include- Windows 7 Professional x64 ( installation itself is about 2.3 years old and its Retail)Age of System - Varies (Oldest component is 2.3 years old [AMD Phenom II X6 1090T], newest is only about 3 months [Asus DirectCU 6870s])
Components -
AMD Phenom II X6 1090T
Asus Crosshair IV Formula 890FX
2x Asus DirectCU 6870
10 GB DDR3 1600 (3x 2GB 1x 4GB)
2 x SSD (C300 and M4)
1x 750GB SATA II HDD
2x DVD/CD-RW - R Combo Drives
1x Rosewill RNX Wireless NIC
(Also I noticed in the Perfmon it says it cannot detect an Antivirus Program, although I do possess one [AVG Internet Security 2012])
How can I stop Windows from asking whether I want to scan and fix an external drive,whenever I turn on that external drive. It gives me the choice to scan and fix or continue without scanning.The annoyance is that when I turn on the external drive, I may be doing something else and the notification will pop up or rather pop under all the other programs and windows I may have open and won't see the notification until I click on the taskbar and Windows Explorer is waiting for some response
View 6 Replies View RelatedI use Internet Explorer, Firefox and Chrome. Firefox is filled with privacy tools including Privoxy, Ghostery and Disconnect. My other browsers do no have anything. I use Windows firewall, Avast Free and Full version of Malwarebytes with malicious web-site blocking turned off. I also use Spyware Blaster. I use Windows 7. I am behind Cisco router.
Problem: When I use facebook.com either https or http, after a certain period of times or page visits, the facebook stops loading and "hangs" on a page not going back or forward. I either have to wait, or close it and open another browser. This has been going on for quite some time. I tried clearing everything with CCleaner, flushed DNS, Etc. When I ping, I get all 4 responses.
