Suddenly I cannot open my DVD drives. I get an error message that says cant find the path or you do not have permission. I have googled the problem and tried various fixes to no avail. They are shown as working ok in device manager.
View 7 Replies
I need to be able to give permissions back to the users to edit the registry which has been disable by GPO.I am trying this:set KEY="HKLMSYSTEMCurrentControlSetControlSession ManagerEnvironment"Icacls %KEY% /t /c /grant:r "USERS":fI get: "The system cannot find the path specified"When I try regini.exeI get:or: Registry editing has been disable by your administrator
am running cmd.exe as Administrator from a user on the Administrators group.
First i have homegroup with my brother when i try to open shared files it said "error network path not found"
second when i turn network discovery on and save changes it return to off automatically.what should i do ??i have windows 7 32 bit and eset smart security 5
i installed a fresh copy of windows 7 onto my laptop and everything checks out i create a username and name the computer etc but then when it gets time to sign into my account it pops up with network path not found and doesnt let me sign in prompts me for a password when i dont have one too, allows me to click over and select different user and password but i have no other accounts on there, tried to reinstall it after formating the HD again but still no luck
View 4 Replies View Relatedi have a webcam in my pc but i don't know how to open it.
View 1 Replies View Relatedim getting this error when i importing csv php file to mysql.
View 1 Replies View RelatedI keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers.
Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error
Ok, I have a laptop and a desktop. Desktop is currently running 7 x64 and laptop is running 7 x86.
Few weeks ago I was able to access my LAPTOP from my DESKTOP normally by using the Network in the explorer. I was prompted to key in my Username and Password of my LAPTOP and I gained access after.
Now, I have no idea what happened to my DESKTOP. I am able to access other computers but not my LAPTOP. It keeps stating Network path not found with error code 0x80070035. Troubleshooting indicates no problems found.
I do dual-boot with Vista x64 on my DESKTOP and I am able to gain access to my LAPTOP using Vista.
One of the workaround I got for Windows 7 is to create HomeGroup and use my LAPTOP to join it and I can gain access to Network after that.
So, is this a HomeGroup bug and any fix for it?
EDIT: Never mind, I just re-create my password on my laptop and it's fine now. So, it's really weird.
I'm trying to run a DOS program (Locoscript 2.51) in XP mode on a Windows 7 Ultimate virtual PC. This doesn't run - with a message 'error writing file(xxxx) path not found'.Program works perfectly in native XP (on a different machine) and the file is in the same place on both.
View 1 Replies View RelatedI keep getting Error code: 0x80070035 The network path was not found error whenever I try to connect to any other computer (running windows 7 ultimate) on my network. I have another computer with windows 7 ultimate that does not have this problem. Firewalls are disabled on all computers. Computers all ping fine. Can ping by name too. If I try to connect via IP address, I get Error Code: Error0x80004005 Unspecified error.
View 9 Replies View RelatedI'm running Win 7/64 Home Premium on my media PC with 7 USB drives, all connected via a powered hub.
Whenever I reboot (warm or cold), the sharing permissions are lost, generally to all, although every so often one of the WD drives will maintain it (the Seagate ones always lose them). I've tried using different ports to no avail. I've changed the properties of the drives so that I am the owner (as an Administrator). That doesn't help either.
I've read that Windows keeps a list of dynamic shares (or something like that) and that this behavior is by design as drives can be disconnected when the PC is not running. Is this true? I never had a problem with Vista, so this is definitely a Win 7 thing.
No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
View 14 Replies View RelatedI'm trying to install windows 7 32bit from a "family pack" upgrade disk (home premium) that I bought like a few hours ago. The disk definitely isn't scratched or dirty.I have a similar problem, that is, when I get to the part where I am supposed to find the drive to install it on (in this case my /C drive) it shows nothing (the list of drives is empty).I bought this computer used and it has a non genuine version of windows 7 (32bit professional)(so I know the computer is able to run windows 7) but I have been having some troubles with that (randomly restarting) so I decided to install a genuine copy of windows 7.
View 3 Replies View RelatedTesting a windows 7 setup and have problems with the default save as/ open location not defaulting to the users home area. It goes to the desktop insteadI have done thefollowinn group policy go to User Configuration AdministrativeTemplatesWindowsComponentsWindows ExplorerCommon Open File DialogClck ontems displayed in Places Bardd your Save Location. for example \myserverusers est\%USERNAME%i have put the setting in number 1 and i does not work, i have put it in all 5 and still does not work, i have tried just
View 1 Replies View RelatedI'd like to use Teracopy for all copying etc. But after moving to 7 from xp it's giving me these errors. I have Win 7 Pro 64-bit. I copy from network drive for which I have read and write permissions as windows' own copy works fine. But with teracopy I immediately get error "Open error: The system cannot find the path specified". I'm trying to copy, not move, a folder with several subfolders from a network drive into local C:. I have administrator privileges. It seems that Teracopy somehow doesn't have even read permission for the network drive. Taking ownership of the network drive (samba share) is not possible.
View 5 Replies View Related(no write permissions to directory. (see WinFileWriterImpl::open())
View 1 Replies View RelatedI have a 11.04 ubuntu samba share that is serving files to my network (though I don't really think this is relevant). I have 2 Windows 7 64bit machines (1 laptop/1desktop) that can access these files fine, however I have 1 Windows 7 32bit that is unable to access the files. (I even think it may have been able to before.)When I browse the network and go to SERVER it says:
"Windows cannot access \SERVER.... the network path was not found"
HOWEVER when I navigate to \192.168.1.151 with explorer it works fine. What I have tried:
* I have removed all wireless networks and reauthenticated.
* I have set all network configs to the most open possible: network browsing: ON, sharing: ON, homegroup: Off and password authenticate.
* Disabled Norton Internet Security firewall (also on the other two computers)
Again this server is perfectly accessible from all other computers (even a third laptop come to think of it), so it must be something stupid with this one laptop.
I'm having difficulty trying to get my new Windows 7 pc set up to share files across my existing home (wired) network which consists of 1 desktop pc running WinXP and 1 laptop running WinXP.I want the 'C' drive on each of the 3 computers to be shared. I've had the 2 Windows XP computers set up and working like this for several years without a problem but I can't seem to get the 'C' drive on the Windows 7 computer to do the same.All 3 computers have the same workgroup name and none of them require passwords to log on to Windows. There are no problems with the firewalls on any of the machines.On the Windows 7 PC when I right click on the 'C' drive and select the 'Sharing' tab, I have set this up to be shared and when I click on the 'Advanced Sharing' button there is a tick in the 'Share this folder' box, the 'Share name' is 'C'. If I then click on the 'Permissions' button, this shows a 'Group or user name' 'Everyone' and this group has Full Control, Change and Read boxes ticked. As far as I can see there is nothing more I can do.
However from my Windows XP computer, when I go to My Network Places and double click on the icon for the Windows 7 'C' drive, I get the message "\Computername is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The network path was not found"I've subsequently set up a sub folder (of the Windows 7 'C' drive) for sharing by right clicking on the folder, choosing 'Share with' and then selecting 'Specific people'. I then set up a group called 'Everyone' with read/write permissions. Now I can navigate to this folder from my 2 WinXP computers.
"Error code: 0x80070035 The network path was not found" when trying to access any network shared drives. Our file server is a windows server 2003 standard edition.This problem occured yesterday on my laptop with OS windows 7 pro. I cannot access any shared folders, shared drives. I cannot access my own laptops shared folders. I can see the device on the network and can connect to my laptop and access files on my laptop from other pc's. I have checked all the services required and they are started, netbios over tcp/ip is enabled, network discovery is turned on, windows firewall is turned off and also tried disabling the antivirus on the laptop but none worked. Also tried the system restore, which did not allow me to log back into the domain giving error " Trust relationship between this workstation and primary domain failed". So had to undo the system restore.
View 9 Replies View RelatedWell, unfortunately I have a serious problem. To go ahead and get this over with.I'm not sure what kind of drives they are..GParted failed to boot [ "BootMGR is missing"] Anyway to figure this out?I'm installing via USB, due to me not currently having the disc.The USB is bootable 100%.
My problem is that Windows 7 does not recognize any of my drives. Nor do I know what kind of drivers to get.Before I tried booting with the USB, it told me that a OS was not found.
my laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
No partition appear when i install win 7 in my system.
View 1 Replies View RelatedI have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies View RelatedIts my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies View Relatedi've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies View RelatedI have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies View RelatedI just reformatted my C: partition running windows 7.All my data is on the D: partition.I took ownership of all the files in D: Their is one folder I still don't have permission to open the files inside which are graphics for a website I am creating..The error message I get is "Windows photo viewer can't open this picture because you don't have the correct permissions to access this file location".so I ran the command prompt as administrator located the folder in question are ran "takeown /R /D Y /F *"It has given me full control of the files and made me the owner but still the error message comes up.
View 7 Replies View RelatedI recently got a new laptop: HP Pavilion dv6-6b12ed
I have a Control panel from Intel where I could change the colors of my screen and other stuff, but I can't get it to open! Here's my weird problem: It shows in the system tray but when I click it I see this: [URL]
When I try to click on it, or anywhere else, it disappears and the program won't open. I've even tried ALL methods in this following link: Graphics — How to open the Intel Graphics Properties window
I think the problem will be solved if I can re-install the driver, but I've no idea what to (un)install. If you need any additional info on my system specs, just ask me or look up my laptop specs.
