Windows 7 Installation Drives Could Not Found
Sep 26, 2012No partition appear when i install win 7 in my system.
View 1 RepliesNo partition appear when i install win 7 in my system.
View 1 RepliesMy system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
Its my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies View Relatedemachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies View RelatedI just got a brand new computer for christmas, it's a hp compaq dc5850, and it was working fine until now! I tried turning the computer on and it got stuck at the blue hp invent screen, I didn't know what to do, so I finally decided to just try and restore it. When I try to use the windows 7 disc to do this it keeps saying "no drives were found. Click to load driver to provide a mass storage driver for installation".
View 1 Replies View Relatedmy laptop hdd died a few days ago and I've been pulling my hair out trying to install Windows 7 on a brand new HDD i bought.I don't know where else to look for the appropriate drivers. Seagate does not provide any and there are no other drivers on the HP website.I managed to flash the BIOS with a new version just before my old HDD crashed (it was on the fritz so I managed to back up my data on a USB)
- I've also tried the Clean Installation Guide posted here, no difference.
- I've tried formatting it in Disk Management, still no detection.
I've looked at many forum topics here and it points to an SATA non-detection issue?or could it be that I"m installing Windows 7 Ultimate on a VISTA machine and it's not accepting it? I bought this new hdd thinking I could just put it in and install with no fuss but 4+ days later it's a giant headache and I can't return the hdd if I wanted to. There's a pin (primary slave) on the Seagate that was not on the original, but there are no jumper pins, could this be the problem?
I have a pretty basic desktop computer (CQ5600Y) that broke down on me recently. I haven't owned it for more than a year. All I know is that I left my computer on for a few hours and when I come back to use it, it was responding very, very slowly. It took 5 minutes just for an icon on my desktop to highlight after I clicked it just once. As a result, I shut my computer off by holding the power button and then turned it back on.
When I turned it back on, it will show the Compaq start-up screen with the option for Setup, Boot Menu or System Recovery. I can get to Setup and Boot Menu, but not System Recovery. If I press nothing during this time, the computer will just turn into a black screen with a blinking cursor and the statement, "Disk Boot Failure, Insert System Disk and Press Enter". I have a Windows 7 installation disk and the system recovery disks, but neither seem to work.
When I use the Windows 7 installation disk, I choose the Windows Setup mode. It then goes to a "Windows is loading files..." screen and I assume it is loading files from the disc. It then asks me which language, time and currency format and keyboard or input method I would prefer. I choose accordingly and press "Next. I then choose "Install Now.." It states that "Setup is starting...". I then get through the licensing information and press "Next" and then I choose Custom so that I can install a new copy of windows.
This next step is where I am stuck. A window pops up with the title "Where do you want to install Windows?"
It also states that "No drives were found. Click Load Driver to provide a mass storage driver for installation." I don't know where to go from here. I assume I need to load a driver, but what driver am I supposed to load? When I click "Load Driver" it asks me to "insert the installation media containing the driver files."
I have inserted the recovery disks (there are 4 of them + one supplemental disc) and searched through them, but I couldn't find anything. What exactly am I looking for? All these file names are foreign to me. Am I looking in the wrong discs? Are there drivers I am supposed to download from some website? If so, what should I type into google in order to find the right drivers?
I have a netbook ASUS Eee PC 1005PXD.After only two days of use, i get a black screen at the beginning: "Reboot and select proper boot device or insert boot media in selected boot device and press a key".Pressing F9 on boot doesn't work and i'm still getting the black screen.F2 is working, then in Boot Settings, i set Removable Device as 1st Boot Device. (and there is no Boot Booster option to disable).Then, using the Windows 7 USB/DVD Download Tool, i create a Windows 7 bootable USB, in order to use the System Recovery.When i get to the System Recovery Options screen, no Operating System appear in the list. (It say to load drivers in this case, but i have no idea which drivers and how to load them).
Then i press next without choosing OS, but pressing Startup Repair after that didn't help.Also using the Command Prompt didn't help (bootrec /fixmbr, bootrec /fixboot, bootrec /scanos, bootrec /rebuildbcd) The two last commands (/scanos and /rebuildbcd) give: "Number of windows installed: 0".Then i decided to reformat and reinstall Windows 7 (my netbook is new):i boot using the Windows 7 bootable USB i created before, then on first screen i press on "Install now".When i get to screen "Which type of installation do you want", i choose Custom.Then i get to screen "Where do you want to install Windows?" but the list is empty, and at the bottom, it is written "No drives were found. Click Load Driver to provide a mass storage driver for installation".
So I installed windows 8 on my HP DV6t-7000 and it regularly gave me BSOD until eventually it stopped booting all together. I have tried doing a fresh install of both win8 and Windows 7 but both provide me with the error that "No drives were found. Click load driver to provide a mass storage for installation". I have run the computer through partition wizard and formatted the hard drive to NTSC but the installation disks still wont recognize the drive, nor will Ubuntu for that matter.
View 9 Replies View Relatedi've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies View RelatedNo drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION.Ok im helping a friend with their computer but have run into a brick wall where can i find a mass storage driver for a hp pavilion dv6-2150us Serial:cnfo146518Product: wa779ua#abarying to install windows 7 home premium 32bitut i get the following during setup No drives were found.click Load Drivers to provide a MASS STORAGE DRIVER FOR INSTALLATION
View 14 Replies View RelatedI'm trying to install windows 7 32bit from a "family pack" upgrade disk (home premium) that I bought like a few hours ago. The disk definitely isn't scratched or dirty.I have a similar problem, that is, when I get to the part where I am supposed to find the drive to install it on (in this case my /C drive) it shows nothing (the list of drives is empty).I bought this computer used and it has a non genuine version of windows 7 (32bit professional)(so I know the computer is able to run windows 7) but I have been having some troubles with that (randomly restarting) so I decided to install a genuine copy of windows 7.
View 3 Replies View Relatedhow can i get windows 7 to install it keeps saying no driver found.
View 1 Replies View RelatedWell, unfortunately I have a serious problem. To go ahead and get this over with.I'm not sure what kind of drives they are..GParted failed to boot [ "BootMGR is missing"] Anyway to figure this out?I'm installing via USB, due to me not currently having the disc.The USB is bootable 100%.
My problem is that Windows 7 does not recognize any of my drives. Nor do I know what kind of drivers to get.Before I tried booting with the USB, it told me that a OS was not found.
Tolerance here, new to the forums as some of you may notice. Anyways I'm trying to install Windows 7 ultimate package on a PC that previously had Windows Vista. I've already ran the Windows Adviser program, and my PC seems fine so i went ahead and tried to install. First i tried using a burned ISO file to a DVD, with this i made my primary boot device the DVD drive, and my setup started normally. But after i selected the language, then a custom installation, and was directed to select the driver in which Windows 7 would be installed on i would get an error that reads, No device drivers were found. Make sure the installation media contains the correct drivers then click OK."
I've browsed these forums looking for someone with similar problems, and i did find them, and a lot of the threads were really annoying seeing as how so many people decided to reply with long irrelevant comments. Based on the answers from those threads I've tried burning the ISO file with a different burner (which was suggested often), but still with no prevail. So i was wondering if there was a problem with my system, or maybe my C: drive.
I completely formatted my computer to Windows 7 Ultimate 64 bit from Windows 7 Home Edition x64, I put in the correct product key and then when I attempted to connect to the internet I couldn't because I don't have the correct drivers.Back when I used to use Windows XP I put a little CD in and then installed the drivers from Device Manager but now with Windows 7, I put the CD in and I can't install the drivers. They show up with a tiny symbol with a yellow exclamation mark on it (it was like this too back when I used XP, but I had no problems then,).
The uninstalled drivers are these:
Base System Device
Base System Device
Ethernet Controller
Network Controller
SM Bus Controller
Also, if this helps my laptop is an Acer Laptop.
Windows 7 Home Premium
AMD A-Series Quad-Core Processor A6-3400M - 4MB cache, 1.4GHz
15.6" HD 1366 x 768 pixel resolution - 6GB DDR3 SDRAM
500GB hard drive
integrated Super-Multi drive
5-in-1 card reader
AMD Radeon HD 6520G Graphics
802.11b/g/n WLAN
Gigabit LAN
I recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new copy of Windows 7 Home Edition. When I got home I plugged the hard drive, a SATA drive, in and popped the install disk in, only right after I got to the "Install Now" button and clicked it did I get this message;No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OKFollowed by;A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step
View 7 Replies View Relatedafter installation of linux mint 7 gloria when i tried to perfoam a new installation windows 7 cant't load drives as well as other operating system i tried
View 2 Replies View RelatedSuddenly I cannot open my DVD drives. I get an error message that says cant find the path or you do not have permission. I have googled the problem and tried various fixes to no avail. They are shown as working ok in device manager.
View 7 Replies View RelatedI have had my system up and running with Windows 7 for at least four or five months. I have four drives in an mATX case. Yesterday, while it was idle, I saw it flash a BSOD and then rebooted. when it restated it displayed the following Error: "No active partition found. Reboot your computer." Which I did several times to no avail. Next, I used the install disk to try to "repair" the partition...seven or ten times, no luck. Also, no drives were listed in the window at repair prompt. So, I pulled all the cables on all the drives but the one containing the system and voilas! here I am writing to you without issue and without three of my drives. I have two other sata drives in addition to my system sata drive. one IDE drive on the system.
View 3 Replies View RelatedI have a system with three hard disks on them. The Primary one has the OS and some programs. Secondary one has programs and data (like pictures and such). Third one has data and backup data.I recently formatted the Primary drive which had Windows Vista on it, and did a full install of Windows 7 Pro.After the install, the Secondary and Tertiary disks showed up in disk management; I just had to assign drive letters to them.The issue: I can see the existing Secondary and Tertiary disks in windows explorer. I can go into properties on each hard disk and see that there is used disk space on them (so the data is still there). But Windows Explorer shows both hard disks as empty. I can't actually see any of the data. What can I do to fix this...obviously without formatting the disks and losing the existing data on there? Is this perhaps a driver issue?
View 5 Replies View RelatedI am getting this <<This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package>> Yesterday I clean uninstalled my photo editing programs, Photplus X4 and PanoramaPlus, which are similar to Adobe Elements. The reason was that certain pics would not display, although displayed elsewhere.This morning my attempts to reinstall from the manufacturer's DVD Rom were unsuccessful with the above error.
View 7 Replies View Relatedafter I first installed Windows 7 to my computer, I was left with only the ability to connect to the internet via Ethernet cable. I've been looking online for wireless adapters or other means to fix this problem, but to no avail.
View 9 Replies View RelatedI bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
I am running windows 7 sp1 and downloaded the german language service pack.but i can t install it and at the end of the progress it fails, with out mentioning the reason or giving an error.I didn t do that from windows update because i wanted to have the installation file for the future, after reinstalling windows.By the way, i have enough free space on windows drive, have downloaded the same 32- bit as the system, and the installation file doesn t seen to be corrupted.I also try to install it, instead of double-clicking- by going to region and language sections and install from there, but in browse window i can t give the installion file to it and it says that : no valid installation package is founded in this folder.
View 2 Replies View RelatedSo, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
View 9 Replies View RelatedI am installing windows 7. but the installation cd won't recognized the hard drives but my bios does. i went to the website and looked up drivers for the wd2500s but they don't have them. they said that they use the software in windows to work. so is there any way to get the drives to work? i have three set up on raid 0
View 5 Replies View RelatedI have a HP dv9920us. A month ago I upgraded to win7 from vista. Everything was working fine until a couple of days ago when returning from work I found a black screen and an error message " no operating system found". No attention paid since I thought that my hdd went bad. So got a new one installed it but got the same message. So went into BIOS and saw that no hdd was detected. My laptop has 2 sata ports so I changed port and to my relive BIOS recognized my hdd in this 2nd port leading me to believe that the first port had gone bad. I did a clean win7 install. Everything went fine. Installed drivers etc no problem. During the first boot after and right after the post message the laptop just suddenly shut down and rebooted and then shut down again just after the post message. This loop went on for a couple of times and finally ended to a black screen with the message " no operating system found". Checked the BIOS again and the hdd was there. Booted the machine with the installation dvd in the drive this time and after the same loop for a couple of times (boot-post message- shut down- reboot ) instead of going to the no "operating system found" it continued and loaded win7. I've performed every possible test that I know for checking memory, hdd etc and everything looks good. The bottom line is that now the only way that I can use my laptop is to boot it with the installation disc in and it loads and works perfectly. If I try to boot it without the disc I end up with the "no operating system found".
View 7 Replies View RelatedI purchased a vizio all in one desktop model CA24-A2 , with windows 7 installed. I upgraded it to windows 8, but decided to return back to windows 7 because the Metro UI always crashes on me. I purchased a windows 7 disc and booted the computer off the disc. When the installation asks which drive to install it to, nothing appears. For some reason, the installation disc is not reading the drives. I've checked vizio's page, but didn't find any drivers for the hard drive that would work. I check the Bios menu and both drives appear. I've read on other forum about changing the bios mode (AHCI,IDE), but my bios menu is very restricted, and i dont have that option available. I used MiniTool Partition wizard on a bootable cd, and it was able to see my hard drives as well. I added some pictures below. When i try to boot windows with windows 8, "bootmgr is missing" error appears. After restarting my computer several times it seems i only have access to the bios menu f2, and not f8 for recovery.
View 4 Replies View RelatedJust built a moderate spec gaming PC from scratch, and all has went according to plan except when I try to install Windows 7, my hard drive won't show up. My new motherboard doesn't have any IDE slots, but I only have an IDE hard drive. I am using a 'Pluscom Serial ATA PCI Adapter' to connect my hard drive to the computer as it has 1 IDE slot on it. I don't have a disc for drivers and don't know where to start. I am running Ubuntu on it at the moment so I can download any drivers I may need.
View 9 Replies View RelatedSet up did not find any hard disk drives during installation?
View 1 Replies View Related