Windows 7 Ultimate X64 New Installation With No Devices Found?
Jul 2, 2012
I completely formatted my computer to Windows 7 Ultimate 64 bit from Windows 7 Home Edition x64, I put in the correct product key and then when I attempted to connect to the internet I couldn't because I don't have the correct drivers.Back when I used to use Windows XP I put a little CD in and then installed the drivers from Device Manager but now with Windows 7, I put the CD in and I can't install the drivers. They show up with a tiny symbol with a yellow exclamation mark on it (it was like this too back when I used XP, but I had no problems then,).
The uninstalled drivers are these:
Base System Device
Base System Device
Ethernet Controller
Network Controller
SM Bus Controller
Also, if this helps my laptop is an Acer Laptop.
Windows 7 Home Premium
AMD A-Series Quad-Core Processor A6-3400M - 4MB cache, 1.4GHz
15.6" HD 1366 x 768 pixel resolution - 6GB DDR3 SDRAM
500GB hard drive
integrated Super-Multi drive
5-in-1 card reader
AMD Radeon HD 6520G Graphics
802.11b/g/n WLAN
Gigabit LAN
View 1 Replies
ADVERTISEMENT
Dec 30, 2009
When I double click on the Bluetooth icon in the taskbar the Bluetooth Devices window comes up, the green bar loads to 99% and nothing happens, even though I have 2 turned on Bluetooth devices near the dongle. I have also tried using the software (BlueSoleil) that came with the dongle, but that doesn't work either. All the devices in the device manager are installed correctly (no unknown devices). I am using Windows 7 Premium.
View 9 Replies
View Related
Nov 2, 2012
i recently installed windows 7 Ultimate on another hard drive to dual boot with my windows 7 Home Premium (Dont bother asking why) And when it finished the installation, it logged on correctly, but now the wifi doesnt work (wifi light isnt even on when the wifi cord is pluged in), also the usb3.0 ports dont work either, how would i fix this?I tried going onto my Home Premium Version and everything worked fine there, specs down below if needed
View 8 Replies
View Related
May 25, 2011
i am having problems with my windows 7 devices and printers screen. I have tried all solutions like stopping the blue tooth support service, uninstalling printer drivers, registry fix for IE 8, stopping printer spooler service and changing display icons all to no avail. I have no idea when the problem started but ive been experiencing this for three months now. i think i dont want to reinstall my OS if it ii am using windows 7 ultimate 64 bit on 4gb ram and intel core i5 processor. also using ie9 as my browser.
View 3 Replies
View Related
Jun 19, 2012
how can i get windows 7 to install it keeps saying no driver found.
View 1 Replies
View Related
Sep 26, 2012
No partition appear when i install win 7 in my system.
View 1 Replies
View Related
Jul 10, 2011
Tolerance here, new to the forums as some of you may notice. Anyways I'm trying to install Windows 7 ultimate package on a PC that previously had Windows Vista. I've already ran the Windows Adviser program, and my PC seems fine so i went ahead and tried to install. First i tried using a burned ISO file to a DVD, with this i made my primary boot device the DVD drive, and my setup started normally. But after i selected the language, then a custom installation, and was directed to select the driver in which Windows 7 would be installed on i would get an error that reads, No device drivers were found. Make sure the installation media contains the correct drivers then click OK."
I've browsed these forums looking for someone with similar problems, and i did find them, and a lot of the threads were really annoying seeing as how so many people decided to reply with long irrelevant comments. Based on the answers from those threads I've tried burning the ISO file with a different burner (which was suggested often), but still with no prevail. So i was wondering if there was a problem with my system, or maybe my C: drive.
View 8 Replies
View Related
Dec 22, 2010
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
View 4 Replies
View Related
Jan 11, 2012
I recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new copy of Windows 7 Home Edition. When I got home I plugged the hard drive, a SATA drive, in and popped the install disk in, only right after I got to the "Install Now" button and clicked it did I get this message;No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OKFollowed by;A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step
View 7 Replies
View Related
Nov 6, 2012
Its my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies
View Related
Oct 31, 2012
i updated windows 7 ultimate x32 on my friends computer only to have her computer not have no wifi or ethernet cable access.. i says i have no network adapter. i tried installing the drivers from another computer saving it on a flash drive and installing it onto her computer but after extracting the file the driver setup never appears. ive tried everything and its driving me crazy. i uninstalled the 54mbps network adapter because it says that was the trouble in the beginning.
View 6 Replies
View Related
Dec 29, 2011
I tried to install driver for samsung laser printer 331 and on desktop w/win 7 home premium. Message says cannot locate printer & in devices & printer its shown in unspecified. Checked printer by installing on laptop with xp worked fine.
View 9 Replies
View Related
Jun 1, 2012
I am getting this <<This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package>> Yesterday I clean uninstalled my photo editing programs, Photplus X4 and PanoramaPlus, which are similar to Adobe Elements. The reason was that certain pics would not display, although displayed elsewhere.This morning my attempts to reinstall from the manufacturer's DVD Rom were unsuccessful with the above error.
View 7 Replies
View Related
Jun 1, 2011
I have an hp 9400f, and had windows 7 ultimate x64 or x86 installed.Two days ago, I unplugged my logitech keyboard. By doing so, it triggered some sort of reaction. The monitor visual showed the screen distorted in coloring, so i assumed that i moved the graphics card a little. I restarted my computer, and when i did, it wouldn't go past the bios screen. I'd get the "hp " blue screen, but would not work ( system recovery ) .The symptoms my computer has right now is the blinking underscore, and from that point on, nothing happens. It stays at that point, never moves on. I have restarted my computer countlessly. I also noticed that when its on this screen, and I press / hold on to a key, my motherboard will make a "clicking" noise repeatedly directly related to the amount of times i press the key. It's instantaneous. I'm not sure if that has anything to do with it though .many people have encountered this issue. One forum had a comment which said this was a result from faulty ram. I have removed each stick of ram, but i have not seen any sort of change
View 9 Replies
View Related
Jan 6, 2010
after I first installed Windows 7 to my computer, I was left with only the ability to connect to the internet via Ethernet cable. I've been looking online for wireless adapters or other means to fix this problem, but to no avail.
View 9 Replies
View Related
Dec 7, 2009
I bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
View 9 Replies
View Related
Jun 7, 2012
We just built a computer yesterday and as we plugged in the speakers on the 7.1 audio on the motherboard, there was no sound! we checked control panel>hardware and sound>sound> and it says "no devices found". we downloaded sound drivers from "realtek", installed it, restarted, still a no go! but as we plugged in the usb headset, voila, there was sound! what we dont understand is why wont the 7.1 audio channel work on the motherboard?
View 22 Replies
View Related
Oct 10, 2011
I got an old pc and once every 6 months i re- instal my windows 7 to keep it up speed.This time i made a big mistake. While instaling i had cleared out all my drives ( c and d) Cause it keeps giving me a message bootmgr is missing press ctrl+alt+del to restart.And if i try to instal windows it starts unpacking till 5% and then i get a message not able to instal code: 8007045d.
View 4 Replies
View Related
Apr 23, 2012
I formatted my hard disk (it has two partitions) and installed Windows 7 Ultimate on one of the partitions.Then when I tried to start Windows 7 Ultimate it said that I must repair the Windows installation.I tried to repair with Windows repair disk the start up but Windows 7 Ultimate won't boot again and says "bootmgr is missing".I tried again to repair with the command prompt,to rebuild with "BOOTREC/REBUILDBCD but it still won't boot.It boots only if I change the Bios and make my DVD as the first booting device and put my Windows 7 DVD on it.If I put other disks it won't boot.Can anyone tell me a way of how to boot without the Windows 7 DVD on the drive.
View 5 Replies
View Related
Nov 1, 2012
I just wanna know how to install Windows 7 Ultimate on my External HDD. First, I tried installing it but it prompts a warning message about BIOS or something I can't remember. My PC's OS now is Windows 7 Home Basic 32-bit, and I have a 2 GB RAM, and I don't have a video card. So, what should I do? I want to install Ultimate on my External HDD if possible.
View 1 Replies
View Related
Dec 15, 2011
I am running windows 7 sp1 and downloaded the german language service pack.but i can t install it and at the end of the progress it fails, with out mentioning the reason or giving an error.I didn t do that from windows update because i wanted to have the installation file for the future, after reinstalling windows.By the way, i have enough free space on windows drive, have downloaded the same 32- bit as the system, and the installation file doesn t seen to be corrupted.I also try to install it, instead of double-clicking- by going to region and language sections and install from there, but in browse window i can t give the installion file to it and it says that : no valid installation package is founded in this folder.
View 2 Replies
View Related
Jul 4, 2012
So, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
View 9 Replies
View Related
Sep 1, 2010
I got the upgrade ultimate win 7; i am upgrading to 64 bit from xp pro 32; as directed i am going with the clean install; my system is already partitioned; at first i jus loaded the disc and change my start up to boot from disk and it would freeze at expanding files tried 3 times and all froze at different %s; after reading a few blogs i disconnected all usb's, multi card reader, all other disc drives and only kept the one running this disk; took out my 2x1GB RAM and left the 2x2GB to only run one channel;i did leave my usb mouse (Logitech MX revolution) and had to connect my key board for a sec when I had to tell it to start win normally since I interrupted boot, but disconnected again; after all this the upgrade seemed to be going awesome i selected my the partition with XP already to wipe out (150GB) and went all the way to completing installation and it froze! so i restarted after 1 hr of waiting and let it run all the way to booting from HDD and error came up saying installation not complete, restart to complete but it just keep coming up, so i started from scratch and now i froze again at expanding files..
View 9 Replies
View Related
Sep 3, 2011
I had a retail version of the genuine edition of Windows 7 Ultimate edition, but I threw away the disk upon moving. However I do still have the CD key for it.I'm wondering how I can do a reformat of the hard drive without a CD/DVD. If there's an official ISO file out there anywhere, I could just enter my CD key again.I have no way of getting to the desktop right now because of BSOD on boot.
View 3 Replies
View Related
Sep 19, 2012
I have a system with a lite version Windows 7 ultimate. From the lite version the remote desktop connection terminal client was remove. There is any way to install it now?
View 1 Replies
View Related
Apr 19, 2012
My Windows 7 Ultimate upgrade($220) from Windows Vista Ultimate was 3/4 done judging from the progress bar. Received a command prompt stating that the upgrade failed due to corrupt installation files.On reboot I get a disc read error ctrl alt delete.I receive the same error everytime I ctrl alt delete. Is the disc corrupted by the upgrade?
View 4 Replies
View Related
Feb 9, 2010
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive
using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
View 9 Replies
View Related
Dec 18, 2012
My computer's HDD had died and all data was lost. I gave for fix but windows ultimate was installed instead of home premium and I want to downgrade because its not genuine and I don't have windows installation CD. Is there any possible way of downgrading without clean install and CD?
View 6 Replies
View Related
May 22, 2012
I have this problem with my Toshiba laptop: Several days ago my com crashed, when I started my computer on the very beginning on start up screen when it says windows is starting I get a 1 second blue screen with some saying and my laptop restarts by it self. So, ok I have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% I get this message Error Code: 0x80070570.
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taken out 1 tried to install-same error, put in another slot-same error,replaced and putted my other Ram Memory in the slots same again. So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%?
View 9 Replies
View Related
Jan 1, 2013
I am getting a error during reinstallation of win 7 which is "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." I have win7 DVD for install. I have Dell xps studio 435MT/9100 desktop. I have 2 hard drives(640gb) each.
View 16 Replies
View Related
Jun 28, 2011
I have a HP dv9920us. A month ago I upgraded to win7 from vista. Everything was working fine until a couple of days ago when returning from work I found a black screen and an error message " no operating system found". No attention paid since I thought that my hdd went bad. So got a new one installed it but got the same message. So went into BIOS and saw that no hdd was detected. My laptop has 2 sata ports so I changed port and to my relive BIOS recognized my hdd in this 2nd port leading me to believe that the first port had gone bad. I did a clean win7 install. Everything went fine. Installed drivers etc no problem. During the first boot after and right after the post message the laptop just suddenly shut down and rebooted and then shut down again just after the post message. This loop went on for a couple of times and finally ended to a black screen with the message " no operating system found". Checked the BIOS again and the hdd was there. Booted the machine with the installation dvd in the drive this time and after the same loop for a couple of times (boot-post message- shut down- reboot ) instead of going to the no "operating system found" it continued and loaded win7. I've performed every possible test that I know for checking memory, hdd etc and everything looks good. The bottom line is that now the only way that I can use my laptop is to boot it with the installation disc in and it loads and works perfectly. If I try to boot it without the disc I end up with the "no operating system found".
View 7 Replies
View Related
