Upgrating From XP To Windows 7 Ultimate 64 / Freezes During Installation
Sep 1, 2010
I got the upgrade ultimate win 7; i am upgrading to 64 bit from xp pro 32; as directed i am going with the clean install; my system is already partitioned; at first i jus loaded the disc and change my start up to boot from disk and it would freeze at expanding files tried 3 times and all froze at different %s; after reading a few blogs i disconnected all usb's, multi card reader, all other disc drives and only kept the one running this disk; took out my 2x1GB RAM and left the 2x2GB to only run one channel;i did leave my usb mouse (Logitech MX revolution) and had to connect my key board for a sec when I had to tell it to start win normally since I interrupted boot, but disconnected again; after all this the upgrade seemed to be going awesome i selected my the partition with XP already to wipe out (150GB) and went all the way to completing installation and it froze! so i restarted after 1 hr of waiting and let it run all the way to booting from HDD and error came up saying installation not complete, restart to complete but it just keep coming up, so i started from scratch and now i froze again at expanding files..
View 9 Replies
ADVERTISEMENT
Mar 11, 2012
On a random basis Windows 7 freezes for about 2 minutes, then proceeds with the activities in normal fashion. The operating system and software is on a Solid State Drive while everything else is on a hard drive. I have troubleshooted all the normal suspects but cannot find the reason for the temporary freeze.
View 5 Replies
View Related
May 25, 2012
I am sorry to bother you but my PC whose OS is Windows 7 Ultimate x86 froze on the 'welcome' screen today! I freaked out and tried everything I could to make it work, but I couldn't. It only runs under Safe Mode which is making me go crazy. I already tried Start Up repair and obviously didn't work!
View 9 Replies
View Related
Oct 20, 2009
I just got the windows ultimate 7 64 bit disc from Microsoft the other day. I have been trying to install it on my computer and everything goes well until the second reboot. At this point the computer freezes at the windows 7 splash screen. The 32 bit version installs perfectly without any problems.
View 8 Replies
View Related
Jun 24, 2011
I have an acer aspire one d255 and recently used a anytime upgrade key and got windows 7 ultimate it worked for a couple days now when i turn my computer on it goes to a black screen and freezes after the welcome screen cant go into safe mode or desktop and takes longer than normal to get to the welcome screen?
View 3 Replies
View Related
Apr 24, 2012
I re-installed windows three days ago. Since then, it has completely frozen (requiring a hard reset) 4 times, twice in a row today, and twice in a row the day before yesterday.
My specs are as follows:
AMD Phenom II X6 1055T
M4A89GTD-PRO
6GB A-Data DDR3 RAM
ASUS EAH5770 CUcore
Windows 7 Ultimate x64
I never had freezing issues before my new installation.
View 4 Replies
View Related
Apr 16, 2012
I have had a boot error and i have formatted my hard disk. I have inserted windows installation disk,it freezes at 99% at the first installation part, i cant even move the mouse. Pls help fast, tried everything ; writing from cell phone . I have no pc now , i even tried connecting my hard disk to another pc. and installing windows from there and it doesnt work.
View 5 Replies
View Related
Jan 21, 2013
I bought a Toshiba laptop it came with windows 8 and I wanted to install 7. I deleted the hard drive and when I start installing windows 7 it freezes right away at "starting windows". After this, I put windows 8 cd into it and setup started.
View 3 Replies
View Related
Jun 1, 2011
I have an hp 9400f, and had windows 7 ultimate x64 or x86 installed.Two days ago, I unplugged my logitech keyboard. By doing so, it triggered some sort of reaction. The monitor visual showed the screen distorted in coloring, so i assumed that i moved the graphics card a little. I restarted my computer, and when i did, it wouldn't go past the bios screen. I'd get the "hp " blue screen, but would not work ( system recovery ) .The symptoms my computer has right now is the blinking underscore, and from that point on, nothing happens. It stays at that point, never moves on. I have restarted my computer countlessly. I also noticed that when its on this screen, and I press / hold on to a key, my motherboard will make a "clicking" noise repeatedly directly related to the amount of times i press the key. It's instantaneous. I'm not sure if that has anything to do with it though .many people have encountered this issue. One forum had a comment which said this was a result from faulty ram. I have removed each stick of ram, but i have not seen any sort of change
View 9 Replies
View Related
Nov 27, 2012
A month ago I started experiencing random system freezes (system halts for ~30sec and then resumes to work normally). I thought it was my Windows 7 going insane, so I did a clean install, but the problem is still present. I read somewhere that SP1 might be the cause, so I haven't done an update to SP1 this time - but the problem remains.
View 2 Replies
View Related
Sep 18, 2012
i have installed window 7 ultimate 32 bit on my 32 bit PC. But it freezes when i restart it.
View 2 Replies
View Related
Aug 11, 2010
My Windows 7 installation freezes every time at the "starting windows" screen right after the little orbs come together to form the windows logo. I have let it sit there for hours and nothing changes. I am doing a fresh installation on a new build.
It seems I have literally tired everything to get this to work (changing bios settings, unplugging unessential usb connections, etc.). When I boot in safe mode the installation gets further along to the "windows is configuring your computer for first time use" but eventually just leads to an error saying that setup cannot finish in safe mode and requires a reboot.
My guess is that maybe this is some sort of driver issue? I have no way of installing any drivers though if I cant even get the OS to install. I am getting extremely frustrated with this and I am amazed that its not working.
specs:
motherboard: msi p55m-gd41
graphics card: Nvidia GTS 250 512MB
2 x 1GB DDR3
Intel i3 530
250GB Maxtor HD
View 9 Replies
View Related
Aug 27, 2010
The installation is done from dvd and worked just fine.
Win 7 Home premium
mainboard Asus M2R32-MVP with bios update v 1109
OCZ PC2 6400 2 GB (have 2 of those took 1 out for installation)
Nvidia Geforce 9800 GTX+
AMD Athlon 64 X2 dual core 4000+
Barracuda 7200 SATA 250gb harddrive (ST3250820AS)
DvD/cd TSSTcorpCD/DvDW SH-S183A
as well i unhooked all usb devices
clean install, worked fine, but after install, the desktop would come up and nothing was working after, just freezes up.
View 8 Replies
View Related
Oct 10, 2011
I got an old pc and once every 6 months i re- instal my windows 7 to keep it up speed.This time i made a big mistake. While instaling i had cleared out all my drives ( c and d) Cause it keeps giving me a message bootmgr is missing press ctrl+alt+del to restart.And if i try to instal windows it starts unpacking till 5% and then i get a message not able to instal code: 8007045d.
View 4 Replies
View Related
Apr 23, 2012
I formatted my hard disk (it has two partitions) and installed Windows 7 Ultimate on one of the partitions.Then when I tried to start Windows 7 Ultimate it said that I must repair the Windows installation.I tried to repair with Windows repair disk the start up but Windows 7 Ultimate won't boot again and says "bootmgr is missing".I tried again to repair with the command prompt,to rebuild with "BOOTREC/REBUILDBCD but it still won't boot.It boots only if I change the Bios and make my DVD as the first booting device and put my Windows 7 DVD on it.If I put other disks it won't boot.Can anyone tell me a way of how to boot without the Windows 7 DVD on the drive.
View 5 Replies
View Related
Nov 1, 2012
I just wanna know how to install Windows 7 Ultimate on my External HDD. First, I tried installing it but it prompts a warning message about BIOS or something I can't remember. My PC's OS now is Windows 7 Home Basic 32-bit, and I have a 2 GB RAM, and I don't have a video card. So, what should I do? I want to install Ultimate on my External HDD if possible.
View 1 Replies
View Related
Jun 16, 2012
My computer freezes randomly windows 7 ultimate 64bit so what can i do?
View 3 Replies
View Related
Nov 2, 2012
I try to start up windows after entering my password at the screen it loads for a while then i am faced with my desktop background and icons show up. If i move my mouse cursor to the bottom taskbar to click start it has the loading circle. If i click anything on my desktop that wont work either. i tried several things but i dont want to fresh install as i have tons of data and files that i need to keep otherwise i would have just went ahead with the fresh install. The things i tried were
1. tried system repair, but i get this "windows cannot repair this computer automatically"
2. I just tried sfc/scannow and I got the following message: There is a system repair pending which requires a reboot to complete. Restart windows and try sfc again.
3. i then did the scanow offline command i found it said scanning and then after 20 min i get this "SFC Windows Resource Protection could not perform the requested operation FIX''
4. Memory tool but i can't see results because as soon as i sign in it freezes
5. ctrl,alt ad del dont work screen goes black then i wait till a message pops up and click enter then it brings me back to the desktop
6. i scanned pc with avg and malawarebytes no viruses.
I called dell but my protection ran out 2 weeks ago and they want 270 for software help i really dont have that type of money as the mortgage gets taken out and im a little behind if not i would have went that option. If you need more infor write in the thread and ill try as i cant really access anything on the pc.
the computer im using is a dell xps 420 ram 4gb hdd 1tb
View 9 Replies
View Related
Aug 16, 2011
I've recently built my first gaming PC and am having trouble installing windows 7 ultimate. Whenever I try to boot from the cd, it loads the Windows 7 files, then freezes on the first screen of the install wizard Unlike this image however, I have no cursor and there seems to be no response to keyboard input. This is in contrast to when I open the BIOS menu and both mouse and keyboard work[CODE]
View 8 Replies
View Related
Dec 23, 2011
i have my computer:
i3 dual core 3200hmhz
mb: msi h55m-e23
8gb ram 1600 (4gb each)
windows 7 ultimate 64bit
cpu:intel r core tm i3 cpu 550 @ 3.20ghz
purchased the combo unit from tigerdirect in jan or april 2011.(here)memory info:
CORSAIR XMS 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMX8GX3M2A1600C9
XMS3 - Xtreme Performance DDR3 Memory
SPD Latency: 9-9-9-24
Tested Latency: 9-9-9-24
Memory Type: DDR3
Speed Rating: PC3-12800 (1600MHz)
Tested Speed: 1600Mhz
>>> purchased here.
power supply i have this one hereinfo:SeaSonic SS-350ES active pfc f3 pso 350 watt 80 plus power supply.so i had this error coming out :today and few days ago sand the computer will just crash into a blue screen:
error: 9c
0000000000000000
fffff80000ba8bb0
0000000000000000
0000000000000000
so i decided to re-install windows fresh,i put my windows 7 ultimate 64bit in and booted from it i got to the screen and click next,then agree ,chosse the hard (is only one 1tb),and then the progress bar % come,,like 30sec the pc is getting frozen ...stock,if i do it again same problem.so,changed hard drive ,same problem,all cables are out ,only keyboard and mouse ,i checked the memory with memtest+ it pass 10. so that means is okay,also tested each memory separate ,same problem.so right now i have the dvd drive ,one hdd 1tb ,memory,thats all i have in my pc,and i cant figure out why is it freezing on me all the time,the computer is clean ,no dust!
View 9 Replies
View Related
Feb 5, 2013
I am trying to install Windows 7 Home Premium in a Compaq SG3207LA but I've run into the following issue: During the installation process, the computer freezes at random intervals, which makes me have to restart it by force. I was finally able to complete the installation and then it froze again while I was installing some application software (on normal mode).At first I thought that the power supply could be causing this issue. I checked it and measured its voltage levels and they're OK. Then I tested the hard drive using a couple of bult-in stress tests from a LiveCD (booting from it), and they completed without any errors.I then started Windows in safe mode and it doesn't freeze at all. I ran again other stress tests and again, they completed successfully.I was thinking that maybe one of two options could be the root cause of this issue:
1) The SATA controller in the motherboard - but in this case, the stress tests would show some sort of error, or it would freeze in safe mode as well, wouldn't it? I haven't yet tested with an IDE hard drive because I don't have one.
2) Some device in normal mode could be using an IRQ that is being used by some other device - this would explain -in my humble opinion- why it doesn't freeze en safe mode while it does in normal mode. But I don't know how to find out which device since this computer doesn't have anything added to it - just the onboard hardware from factory.And before I forget, I tried with 2 different installation DVDs, so I don't think this can be caused by a failed media.
View 7 Replies
View Related
Jan 30, 2012
So I just received some new computer parts today:
AMD Phenom II x4 960t
8gb patriot pc3 10666 ram
ASUS M5A78L-M LX motherboard
I've installed the new parts but am having a lot of difficulty installing windows. I've tried installing both windows 7 and winxp multiple times with no luck. Both of the CDs have worked in the past, and there aren't any visible scratches or damage to them. Win7 and xp freeze at random points during the installation, usually during the "completing installation" or unpacking files stage.
I've tried the installation with two different DVD drives, with only one ram stick, various bios settings, etc. One thing that I've also noticed is that it will fail to boot unless being powered off completely. For example, after the initial stage of copying/unpacking files the usual reset that windows does to continue with the installation results in only a black screen (no beep).
However, when I power down the computer completely then start it up, the installation Is able to continue but only to eventually freeze. One install did actually work, however after installing a few drivers it started freezing while windows was starting up. It would start in safe mode and I did a system restore but it continued to freeze. I figured at that point I had nothing to lose and began trying another reinstall - and now it won't work at all.
View 7 Replies
View Related
Jul 2, 2012
I completely formatted my computer to Windows 7 Ultimate 64 bit from Windows 7 Home Edition x64, I put in the correct product key and then when I attempted to connect to the internet I couldn't because I don't have the correct drivers.Back when I used to use Windows XP I put a little CD in and then installed the drivers from Device Manager but now with Windows 7, I put the CD in and I can't install the drivers. They show up with a tiny symbol with a yellow exclamation mark on it (it was like this too back when I used XP, but I had no problems then,).
The uninstalled drivers are these:
Base System Device
Base System Device
Ethernet Controller
Network Controller
SM Bus Controller
Also, if this helps my laptop is an Acer Laptop.
Windows 7 Home Premium
AMD A-Series Quad-Core Processor A6-3400M - 4MB cache, 1.4GHz
15.6" HD 1366 x 768 pixel resolution - 6GB DDR3 SDRAM
500GB hard drive
integrated Super-Multi drive
5-in-1 card reader
AMD Radeon HD 6520G Graphics
802.11b/g/n WLAN
Gigabit LAN
View 1 Replies
View Related
Sep 3, 2011
I had a retail version of the genuine edition of Windows 7 Ultimate edition, but I threw away the disk upon moving. However I do still have the CD key for it.I'm wondering how I can do a reformat of the hard drive without a CD/DVD. If there's an official ISO file out there anywhere, I could just enter my CD key again.I have no way of getting to the desktop right now because of BSOD on boot.
View 3 Replies
View Related
Sep 19, 2012
I have a system with a lite version Windows 7 ultimate. From the lite version the remote desktop connection terminal client was remove. There is any way to install it now?
View 1 Replies
View Related
Apr 19, 2012
My Windows 7 Ultimate upgrade($220) from Windows Vista Ultimate was 3/4 done judging from the progress bar. Received a command prompt stating that the upgrade failed due to corrupt installation files.On reboot I get a disc read error ctrl alt delete.I receive the same error everytime I ctrl alt delete. Is the disc corrupted by the upgrade?
View 4 Replies
View Related
Jun 12, 2009
A while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs:
Dell dimension 5150
XP professional sp3
3ghz intel pentium 4
5 gb RAM
Radeon x300 SE 128mb hypermemory
direct x 9.0
creative SB live! 24-bit
160gb maxator SATA HDD
View 3 Replies
View Related
Sep 18, 2010
I am trying to install Windows 7 64 bit on my system and it freezes during expanding files. I searched all forums and information thats available online, tried everything that was listed but no solution yet.
My system is Foxconn P9657AB-8EKRS2H LGA 775 Intel P965 Express ATX Intel Motherboard, Intel Quad Core Processor, 6 GB RAM on 3 slots, I had a 250 GB before this process but i bought a 1 TB 7200 RPM HD thinking that it would solve the problem somehow.
I took out all USB items including mouse & keyboard and using PS2 mouse/kb now. Also took out 2 RAMs leaving only one 2 GB. Now the machine only has the mother board, processor, video card, 2 gb ram, ps2 mouse & keyboard, and the monitors.
I checked BIOS, and i have the latest update. Tried everything on BIOS from setting it to Safe Mode, Disabling all USB ports, Internal Audio Device, and pretty much everything that i found online. Im just yet to flush the BIOS, change DVD drive and install it from a flash drive.
View 9 Replies
View Related
Dec 30, 2010
I just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.
Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.
I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.
View 6 Replies
View Related
Feb 9, 2010
So I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive
using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
View 9 Replies
View Related
Dec 18, 2012
My computer's HDD had died and all data was lost. I gave for fix but windows ultimate was installed instead of home premium and I want to downgrade because its not genuine and I don't have windows installation CD. Is there any possible way of downgrading without clean install and CD?
View 6 Replies
View Related