I just wanna know how to install Windows 7 Ultimate on my External HDD. First, I tried installing it but it prompts a warning message about BIOS or something I can't remember. My PC's OS now is Windows 7 Home Basic 32-bit, and I have a 2 GB RAM, and I don't have a video card. So, what should I do? I want to install Ultimate on my External HDD if possible.
View 1 Replies
I have to go away for a week or so, and wanted to bring my Computer with me. Since, my computer is a desktop I purchased an External Hard Drive Enclosure (Link: Newegg.com - SilverStone TS07B Aluminum / Plastic 3.5" Black USB 3.0 Tool-less Design External Enclosure). I installed my Hard Drive (Seagate 1 TB 7200 RPM HDD 6.0 SATA), in it. I then, proceded to do a "Test Boot." I booted off of it and the Computer Restarted. I tried again, it crashed and Restarted. I tried it on another computer I had and it flashed a BSOD for .2 seconds.
View 1 Replies View RelatedI have an hp 9400f, and had windows 7 ultimate x64 or x86 installed.Two days ago, I unplugged my logitech keyboard. By doing so, it triggered some sort of reaction. The monitor visual showed the screen distorted in coloring, so i assumed that i moved the graphics card a little. I restarted my computer, and when i did, it wouldn't go past the bios screen. I'd get the "hp " blue screen, but would not work ( system recovery ) .The symptoms my computer has right now is the blinking underscore, and from that point on, nothing happens. It stays at that point, never moves on. I have restarted my computer countlessly. I also noticed that when its on this screen, and I press / hold on to a key, my motherboard will make a "clicking" noise repeatedly directly related to the amount of times i press the key. It's instantaneous. I'm not sure if that has anything to do with it though .many people have encountered this issue. One forum had a comment which said this was a result from faulty ram. I have removed each stick of ram, but i have not seen any sort of change
View 9 Replies View RelatedMy sata usb 2.0 external drive is not being recognised in windows 7 ultimate 32bit.all my other usb devices work fine when plugged in.
View 2 Replies View RelatedI got an old pc and once every 6 months i re- instal my windows 7 to keep it up speed.This time i made a big mistake. While instaling i had cleared out all my drives ( c and d) Cause it keeps giving me a message bootmgr is missing press ctrl+alt+del to restart.And if i try to instal windows it starts unpacking till 5% and then i get a message not able to instal code: 8007045d.
View 4 Replies View RelatedI formatted my hard disk (it has two partitions) and installed Windows 7 Ultimate on one of the partitions.Then when I tried to start Windows 7 Ultimate it said that I must repair the Windows installation.I tried to repair with Windows repair disk the start up but Windows 7 Ultimate won't boot again and says "bootmgr is missing".I tried again to repair with the command prompt,to rebuild with "BOOTREC/REBUILDBCD but it still won't boot.It boots only if I change the Bios and make my DVD as the first booting device and put my Windows 7 DVD on it.If I put other disks it won't boot.Can anyone tell me a way of how to boot without the Windows 7 DVD on the drive.
View 5 Replies View RelatedI got the upgrade ultimate win 7; i am upgrading to 64 bit from xp pro 32; as directed i am going with the clean install; my system is already partitioned; at first i jus loaded the disc and change my start up to boot from disk and it would freeze at expanding files tried 3 times and all froze at different %s; after reading a few blogs i disconnected all usb's, multi card reader, all other disc drives and only kept the one running this disk; took out my 2x1GB RAM and left the 2x2GB to only run one channel;i did leave my usb mouse (Logitech MX revolution) and had to connect my key board for a sec when I had to tell it to start win normally since I interrupted boot, but disconnected again; after all this the upgrade seemed to be going awesome i selected my the partition with XP already to wipe out (150GB) and went all the way to completing installation and it froze! so i restarted after 1 hr of waiting and let it run all the way to booting from HDD and error came up saying installation not complete, restart to complete but it just keep coming up, so i started from scratch and now i froze again at expanding files..
View 9 Replies View RelatedI completely formatted my computer to Windows 7 Ultimate 64 bit from Windows 7 Home Edition x64, I put in the correct product key and then when I attempted to connect to the internet I couldn't because I don't have the correct drivers.Back when I used to use Windows XP I put a little CD in and then installed the drivers from Device Manager but now with Windows 7, I put the CD in and I can't install the drivers. They show up with a tiny symbol with a yellow exclamation mark on it (it was like this too back when I used XP, but I had no problems then,).
The uninstalled drivers are these:
Base System Device
Base System Device
Ethernet Controller
Network Controller
SM Bus Controller
Also, if this helps my laptop is an Acer Laptop.
Windows 7 Home Premium
AMD A-Series Quad-Core Processor A6-3400M - 4MB cache, 1.4GHz
15.6" HD 1366 x 768 pixel resolution - 6GB DDR3 SDRAM
500GB hard drive
integrated Super-Multi drive
5-in-1 card reader
AMD Radeon HD 6520G Graphics
802.11b/g/n WLAN
Gigabit LAN
I had a retail version of the genuine edition of Windows 7 Ultimate edition, but I threw away the disk upon moving. However I do still have the CD key for it.I'm wondering how I can do a reformat of the hard drive without a CD/DVD. If there's an official ISO file out there anywhere, I could just enter my CD key again.I have no way of getting to the desktop right now because of BSOD on boot.
View 3 Replies View RelatedI have a system with a lite version Windows 7 ultimate. From the lite version the remote desktop connection terminal client was remove. There is any way to install it now?
View 1 Replies View RelatedMy Windows 7 Ultimate upgrade($220) from Windows Vista Ultimate was 3/4 done judging from the progress bar. Received a command prompt stating that the upgrade failed due to corrupt installation files.On reboot I get a disc read error ctrl alt delete.I receive the same error everytime I ctrl alt delete. Is the disc corrupted by the upgrade?
View 4 Replies View RelatedSo I have searched around and none of the solutions worked, but let me get to the basics:
DFI LanPark DK 790 FX Motherboard
3.2 GHz AMD Athlon X2 64 bit processor
4 GB DDR2 RAM
Nvidia GeForce 8800 GTS Video card with 720 MB Ram
Hard drives:
Western Digital Raptor @ 70 GB (going to be used as the OS drive)
Western Digital Caviar @ 80 GB
Maxtor 120 GB IDE drive (the other 2 are both SATA drives)
Sony DVD R/RW Drive
using onboard audio
Okay so I am running a fresh, clean install (the only "information" is on the IDE drive, and that's my backup for iTunes and Steam) using the Windows 7 Ultimate DVD. The DVD kept hanging @ "completing installation", so I took it to my laptop, and using the instructions on here, made a bootable flash drive.I just tried completing installation from the bootable flash, and it still hangs at that step.When it hangs, it's in a locked up state.. I can't even press Shift + F10 (nothing happens). Also, the CD correctly makes the "System Allocated" section on the drive. Also, i removed all USB drives, and am running both a PS/2 mouse and keyboard.
My computer's HDD had died and all data was lost. I gave for fix but windows ultimate was installed instead of home premium and I want to downgrade because its not genuine and I don't have windows installation CD. Is there any possible way of downgrading without clean install and CD?
View 6 Replies View RelatedI have this problem with my Toshiba laptop: Several days ago my com crashed, when I started my computer on the very beginning on start up screen when it says windows is starting I get a 1 second blue screen with some saying and my laptop restarts by it self. So, ok I have Windows 7 Ultimate installation dvd and i tried to install it,everything goes well untill on the second line of the very beginning of windows installation 98% I get this message Error Code: 0x80070570.
I've read some forums people were saying that this could be a RAM problem,so,ok my toshiba have 2 RAMS x 2 Gb..so i taken out 1 tried to install-same error, put in another slot-same error,replaced and putted my other Ram Memory in the slots same again. So,is there any solution how to fix this?i can see in bios that bios is reading my HDD,not sure if its working,does that mean that if BIOS is recognizing my Laptops HDD that works 100%?
I am getting a error during reinstallation of win 7 which is "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." I have win7 DVD for install. I have Dell xps studio 435MT/9100 desktop. I have 2 hard drives(640gb) each.
View 16 Replies View RelatedI have been encountering this same error code in one of my machines. I get the Error Code: 0x8007050 during installation of Win 7 Ultimate 64 Bit. It occurs during the expansion of files phase, during instalation, with the message "Windows cannot install the required files. Make sure the required files are available..."
Machine Specs:
Intel DP43TF MB
Intel Quad Core 8300 CPU
4GB OCZ ATI DDR2 RAM
Antec 500 Watt PSU
Hitachi HDS725050 KLA360 HD
and later a Seagate ST3640323AS HD.
In previous installations of Win 7, I've observed that about 29MB are copied to the System Reserved partition. In this scenario, only 11MB are copied. I've performed the following trouble shooting in order:
- Changed out the DVD drive. Tried installation again without success.
- Performed factory system restore on the hard drive. Tried installation again without success.
- Replaced the hard drive with a new one. Tried installation again without success.
- Removed all PCI cards, and tried again with just the PCI-E video card. Tried installation again without success.
- Replaced the PCI-E video card with a PCI card. Tried installation again without success.
- Cloned the "System Reserved" partition from another PC with a functioning install of the same OS. Tried installation again without success.
It should be noted that this specific machine was previously running Win 7 Ultimate 64 Bit. I was simply attempting to upgrade the hard drive. I've also tried to install Win 7 Home and Win 7 Pro, all with the exact same error code, which occurs during the same phase of installation. I also tried to perform an Upgrade install. The machine accepted a complete install of Win Vista Ultimate 64 bit (twice), but had the same error codes appear during the Upgrade install to Win 7 Ultimate 64 Bit. I reformatted and reinstalled same Vista 64 bit OS. I tried to install Win 7 Pro 64 Bit, and again encountered the same error codes. Incidentally, I have used 3 different Retail Win 7 install media. The machine passes all MemTest and CPU diagnostics.
How can i change windows 7 home premium to ultimate without installation disk
View 1 Replies View RelatedI can't install my Windows Ultimate 64 bit edition on my RAID 0 Western Digital 500GB hdd's because on the boot screen my computer keeps telling me to "Reboot and select proper boot device or insert boot media in selected boot device", I've done both those instructions, rebooted, reinserted, all of it, no solution. I made sure my boot priority is the drive first, and raid drives after. Still nothing. But this is the interesting part, last time I fixed this problem by using my previous computers dvd drive to install instead of the blu ray, it installed and everything was right with the world.
But I have since then thrown out the old DVD drive, and now have nothing to install with. So what I did in the past hour was used a freinds DVD drive to install and it did not work. When my System Config, is set to RAID, it calls both my blu ray and his dvd drive, ATAPI CD, when in IDE, it calls my blue ray a blue ray and his dvd drive a dvd drive. I simply want to do a clean(custom) install of my windows 64 bit on my two RAID 0 HDDs, I've checked the boot priority, I've put both hdds in RAID0 and I've also used someone elses dvd dive to try and install.
I have a dvd of genuine windows 64 bit professional and the problem is that instead of a cd/dvd drive I have an ultrabay hard drive which I want windows 7 to be on.
So the whole process would be getting all files from DVD, and "burning" them to external hard drive so I would be able to install Windows 7 on my 500gb hard drive.
After i press any key to reboot from DVD, the windows is loading. But when it reach to the screen where we suppose to select language, currency & time format and keyboard layout, the screen become stuck. Mouse cursor doesn't appear and keyboard also not available to use.
View 6 Replies View RelatedBefore upgrading from XP to 7, I made backup on 2 external drives. I tested both backup, and they tested fine.
I then reformated my laptops hard drive & installed Windows 7. No problems were reported.
However I could not access the data on the 2 external hard drives. Windows 7 reported that they were unreadable and that I needed to reformat them!
The 2 hard drives were connected to my laptop when I installed Windows 7
I had to take both too a comuter geek who spent 2 days recovering my data - at a huge cost to me.
Is there any way to use a windows 7 Ultimate Upgrade disc as a installation disc? Or would I have to go out and get another Windows installation disc and then use the upgrade disc?
View 6 Replies View RelatedCan I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
View 3 Replies View RelatedI bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
View 9 Replies View Relatedhow can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
View 6 Replies View RelatedI have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies View RelatedI just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies View RelatedSo i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
How to get output on external speaker by using external microphone via laptop.(window 7,xp and vista)
View 1 Replies View RelatedI am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs."
The installation compatibility test warns me about my Nvidia drivers, which I've attempted to both remove and upgrade to the latest version, but that doesn't seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that.
The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)."
As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference.
System specs: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
