Get Output On External Speaker By Using External Microphone Via Laptop?
Feb 24, 2012How to get output on external speaker by using external microphone via laptop.(window 7,xp and vista)
View 1 RepliesHow to get output on external speaker by using external microphone via laptop.(window 7,xp and vista)
View 1 RepliesI have Dell Inspiron N4050 Laptop with Integrated Webcam and running Windows 7 Ultimate edition - 64 bit.I normally call using Gmail's Call phone service. I want to setup so that I can use Internal microphone in laptop to transmit my voice and hear the incoming call voice using external speakers.I normally keep external speakers connected to laptop for listening to music, but whenever I have to make a call, I have to remove the speaker cables and connect headphone cables in audio jack. So, I am looking up for solution to do make audio/video calls using external speakers and without needing to connect headphones to transmit my voice to caller.
View 2 Replies View RelatedIm running 7 on my laptop, and im trying to get it to output only to my external monitor when the lid is closed. I can get it to extend my desktop, but when i close the lid, it turns off the external monitor. I have set Windows 7 to do nothing when lid is closed. Is there anyone else with this problem?
I have an Dell Inspiron 1525, with Intel x3100 integrated graphics, if that helps.
Onboard laptop speaker including headphones is working but external speaker is not working..why??
View 2 Replies View RelatedI'm running Windows 7 Home N SP1 x64. I'm using an M-Audio Fast-Track Pro device to record audio into a music sequencer (Cubase 5), through a Shure SM58 Microphone. The M-Audio box is connected to the computer via USB. I've been using this set-up for about a year now and it hadn't caused me any problems until the last few weeks. For some reason Windows is not registering any signal from the input of the M-Audio box. The box itself picks up the sound and I can hear tapping on the microphone when M-Audio is selected as the output device, but not from the built-in speakers.
I first noticed the problem in the software (and thought for the longest time that it was the software). I'm very competent with Cubase and tried everything I could think of to get it to register with no avail. It was only when I tried to use the device on another sequencer that I realised that it's not the software. Then, since the mic works fine, the box itself is picking up the signal and out-putting it through itself, it must be something wrong with the computer or the OS.
I've re-installed the M-Audio driver, didn't make any difference. I've set the M-Audio as default in both playback and recording tabs in the sound control panel. Playback works fine. One thing that's really strange is that when I open manage sound drivers in the control panel and tap on the mic, neither the levels in recording nor playback even flutter, even though I can hear it pretty clearly through the headphones.
i want to use my computer mic,so what is the first step
View 1 Replies View RelatedWhen i use my SKYPE account to talk with someone they can totally hear me but the problem is I can't hear them. my audio device is REALTEK audio device
i tried a lot of changes in my laptop but it doesn't work at all.
how I can talk through the computer speaker using a microphone?
View 1 Replies View Relatedhow do I install system speaker and get sound output on my computer?
View 2 Replies View RelatedI recently purchased DELL N5050 laptop. I installed Windows 7 Ultimate OS on it. I installed all the drivers required from this link: url...But whenever i play any media (viz., audio/video), only front-right speaker sound playing can be heard. The front-left speaker does not work. Its a brand new laptop. I tried re-installing all the drivers (which i thought may not have been installed properly).
View 2 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View Relatedi have a samsung syncmaster 915N that i am trying to hook up to one of my laptops and am having no luck. i have two hp's one is a pavillion dv4, the other is a dv6000. i tried messing with every setting i could find on both computers and can't get anything but a black screen to show up on the samsung monitor. it came from a desktop that crashed so i know it works. i tried the function key that looks like the monitor as well.
View 3 Replies View RelatedFor a total of three including the laptop screen. My laptop is a Dell E5420 with a VGA out on one side, and a HDMI on the other. I can also put it in a docking station and have a DVI connection there. I believe I have the hardware, but do not know what to do.
View 2 Replies View RelatedI am using a SAMSUNG NP-S3510-A03 laptop. The problems I have had with this laptop are unreal, I wouldn't recommend anyone to buy itAnyway, my current problem is that the laptop will not read my external HD that it was previsouly reading fine before.I recently got a whole bunch of important files on the external HD to transfer to the laptop. While it was transferring the files, the transfer window crashed. I ended the task and went to try again but the external HD would no longer show up in My Computer. I tried restarting, no joy. I then tried plugging the external HD into all 3 USB ports, still no joy.It won't even show up in Disk Management.
When I plug the external HD in, the light comes on so seems to be working fine. But I get no noise in Windows to say the device has been connected, no autorun, nothing.I really need the files that are on it ASAP and cannot get the files from the original source anymore. I have not tried it on anyone elses PC/laptop yet and won't be able to for some time.
I'd ideally like to rig it up to an HDMI adapter, but VGA would be fine as well.
View 2 Replies View Relatedhow to install windows 7 operating system in HP Pavilion dv6000 Laptop with samsung external dvd writer ?
View 2 Replies View RelatedI have a laptop which is connected to an external monitor through a HDMI cable.Sometimes when I'm using the external monitor for watching a movie or playing a game I close the laptop lid. If I need to type for a second, when I open the laptop it automatically changes from the external display to the laptop display. This sometimes crashes certain applications and games. I would much prefer if it didn't automatically change my current screen when I plugged in a HDMI cable or when I opened the laptop lid. Is this possible?
View 3 Replies View RelatedI recently got a 24" 1920 x 1080 external LCD monitor for my laptop. It's awesome. I've been using laptops only for many years and now I'm very sorry I waited so long before getting one. But, on to my issue:
I want to only use the external monitor and keep the laptop screen turned off. The problem is that when I resume from sleep sometimes, but not always, the laptop display comes back on showing only the desktop wallpaper. So I then have to hit the windows key plus "p" (for projector) and select projector to get the laptop display turned off again.
I know how to select the external monitor in Windows 7. Basically, one goes to screen resolution from the desktop right click context menu and make the proper selection under multiple monitors (see screenshot below).
But windows 7 seems to forget this setting sometimes and it's a mild annoyance to have to check the laptop monitor and if it's on, hit the windows key plus "p" each time (or almost each time).
So I'm wondering if there's some way to force windows 7 to remember to use only the external monitor and keep the laptop monitor off until I tell it otherwise? I suppose this issue is likely due to some bug in one of my drivers but I am using all the latest drivers.
I was given two External usb HDDs both 80gb each, my friend said they were totally unusable on his laptops they were corrupted but using them on my laptop I successfully formatted and am using them as we speak.
I'm just concerned with whether or not I will lose all i've backed up onto these External HDDs because of them not working on my friend's laptops but working perfectly fine on mine!
I have my external drive, I am connecting to my computer but its not detecting.I have HP probook 6455b, window 7 laptop.
View 1 Replies View RelatedI am planning to move to another country and do not want to transport my desktop Win XP system.If I were to buy a new laptop maching can I set up the hard drive from my desktop, as an external device,so that the new laptop can boot from that external drive? My XP drive is SATA.I really did not know how to categorize this question so I Windows 7, assuming the new laptop would have that OS.
View 3 Replies View Relatedusb mouse idoesnot connect with my hp proBook 4530s
View 1 Replies View RelatedMy windows 7 professional 32bit on my laptop has a problem. Everytime I turn it on, my laptop screen is white (and fades in some hints of black) and nothing shows up. However, sometimes I am able to get a display on an external monitor.
Before my computer loads my desktop it does a startup repair. What ends up happening is that it does a system restore and my computer is able to boot up normally on my external monitor (laptop screen still white). Once everything loads, my computer automatically looks for and installs a VGA controller driver (at this point I am suspecting something may be wrong with my graphics card because I no longer have the windows aero theme).
Once the VGA drivers are installed, my computer says it has to restart so that changes can be made. After the restart, everything is back to normal with my laptop screen working again and now I have the aero theme again. What is the problem? I've been trying to fix this for weeks. It should be noted that I can't always get the display onto my external so I have to keep on force restarting (holding onto the power button) until I can get it on the external.
I installed a new driver for my graphics card and it hasn't fixed the problem. I know there is a virus on my computer (file is tdx.sys). I am going to replace that file with a new one following some instructions from another forum but I don't want to do that yet because I am currently writing exams and not much of a tech savvy person. I don't want to mess around with system files until at least after my exams so I can back up everything.
My work laptop, an HP 8560p, crashes after a period of time with an external monitor connected to it. Crashing can occur anywhere from a few minutes after rebooting to a couple hours after rebooting. There is no BSoD when the laptop crashes; the laptop just shuts off and automatically restarts. I have not been able to replicate this issue without an external monitor plugged in. The issue happens with the external monitor plugged in via direct to the laptop or through the dock; VGA or DVI.
So far I've tried:
A clean sweep of the video drivers and testing both the windows display drivers and the ATI drivers.Sending the laptop to HP, where they completely replaced the motherboard.Currently running memtest86+ (currently 2 passes through without any issues).
I'd like to boot a Win 7 laptop from an external hard drive with XP and software installed. Probably use a USB port input from the drive through an adapter. Is it possible to boot XP that way and read and write personal files on the drive? The drive is eSATA and is Windows 7 compatible.
View 5 Replies View RelatedI was wondering if there was a device I could plug into the male usb lead on my hard drive and connect it to my computer over wifi or through another usb dongle on my laptop, this would allow me to watch movies without having to go to where my HD is stored and moving them to my laptop manually. I have a lot of files on my external hard drive, it is not portable and it needs to be plugged into a wall socket so I cant just carry it around with my laptop. My hard drive is a western digital 1TB external hard drive and I am using windows 7.
View 1 Replies View RelatedI installed 2 hard drives using a caddy in my laptop, 1 SSD for the OS and 1 HDD for data. Every once in a while (once a year id say) I still need the DVD drive so I bought an external DVD enclosure (Generic). The problem right now is that windows doesn't recognize it or rather doesn't recognize it correctly.On windows 7 pro x64.here is a pic of the device manager so windows recognizes it a a disk drive automatically (changed it manually to optical drive) and adds a portable device (? WPD FileSystem Volume Driver). The drive appears in My computer but empty.
What Iv tried:
- chose manually all available drivers from windows in update driver.
- disabled power management on usb
- other usb port/computer (on Windows 7 32bits)
- using a power cable instead of the usb power cable
- google search for drivers using the device id ( USBSTORDISK&VEN_GENERIC&PROD_EXTERNAL&REV_1.12303030303030303030303030&0)
I recently got a new monitor (samsung sync master s27b350), and when I connect it to my laptop (alienware m11x r2) it works perfectly fine through either vga or hdmi. Until I close the laptop's lid. Then the image on the external monitor either flickers or goes completely black (I have settings to 'do nothing' on lid close). All my drivers appear as up to date and working, and with the lid open, there is no flickering. I have tried several different cables of each hdmi and vga all with the same results.This didn't happen for the first 3 days with the new monitor, but then the problems started shortly after.
View 4 Replies View RelatedI am a MAC user but for a project I have to upload something on a PC...the external hard drive is recognized by the computer but I cant see the files on it...it is fine when I hook it up to the Mac..
View 1 Replies View RelatedHow can install external hard drive on my laptop
View 2 Replies View RelatedI can copy any files (from and to) in any external devices.... wen i tried it says disk write protected
View 4 Replies View Related