Upgrading From Windows Ultimate 32bit To Ultimate 64bit?
Aug 3, 2010
Can I upgrade from Windows ultimate 32bit ver 6.1 ( build 7600) to windows 7 ultimate 64bit edition and keep all of my installed programs and files ?[meaning not having them moved to a new folder called windows.old]
I am running Windows Vista Home Premium on my Dell Inspiron 1721. Can I upgrade to windows 7 Ultimate 64 bit software. I have purchased Windows 7 Ultimate and received both 32 and 64 bit software discs.
how can i change my 32 bit win7 ultimate free dos to 64 bit win7 ultimate?can i do it without charge? where can i get it done?? can i get the iso/disk in downloadable format?
I'm planning to replace the 32-bit OS with 64-bit Windows 7 Ultimate. This laptop can support 8GB as mentioned in the catalogue. I guess the processor i5-430M is the first generation processor. I'm getting two 4GB RAM modules fairly cheap with same speed specifi'x.
I've no plans to trade off this laptop because its a rare "breed" - Made in Japan by Fujitsu and after 2 years of service it still runs extremely well.
I've been a 32bit windows 7 user for quite long time and have a lot of softwares installed on my Lenovo g460 laptop. I'm planning to migrate to 64bit windows 7 ultimate OS.can i copy/clone my Drive C (where my OS is installed) to my Samsung S2 Portable External Hard Drive to still use my laptop while wiping out my Internal Drive C for a clean install of the 64bit OS? Will there be a conflict on changing Device Drivers to 64bit if booting up using my external drive? is it really possible to still use my laptop while doing a lot of software re-installations.
I am using Windows 7 ultimate 32 bit. I am planning on installing the 64 bit version soon. Before I do I wanted to know if it could be installed on just one partition. My 500 GB hard disk has about 7 partitions ( C : , D: , E : etc). If I want to install windows 7 64 bit on the primary C: Drive (Clean install) would it affect the other partitions, which has data on them? (D: , E: etc?) like erase or not make them function. Also will my external hard disks which worked on 32 bit system (seagate goFlex Desk) work on the 64 bit after i plug it in after the install? All of my externals have my backups and I wouldn't want them erased.
I have 3 systems each running Windows 7 Ultimate on a home network (not a home group). I have an HP Laserjet 1022 attached via USB to system #3 (32 bit). System #1 is 64 bit and #2 is 32 bit. System #2 prints fine on system #3. When system #1 (64 bit) prints, the entry is made into the print queue of #3, but never prints. I've tried restarting the print spooler to no avail. Print entry from #1 cannot be cancelled. I have to manually delete the spooler entry for the print job from C:/Windows/system32/spool/PRINTERS.Without getting into finger pointing at HP, is there a problem with the printing software in Windows 7 when OS word sizes are mixed ? Is the HP Laserjet 1022 driver too old to be used (the driver states it was modified this current year)?
I got windows 7 ultimate 32bit free from my school, and decided that I wanted to clean install, and not upgrade it. I transferred all my files off, booted the laptop up with the windows 7 disk, and proceeded to clean install. I didn't have the drivers cd for my laptop, but I just wiped my drive and installed 7 anyway. Now I have windows 7 ultimate 32bit, and can only use 3 of my 4 gigabytes of memory.. The thing I don't really understand is the whole upgrading option, and like, I know that it's a windows 7 32bit dvd, but it doesn't seem right to go from 64bit to 32bit. So is there anyway I can make it 64bit without having to buy a new dvd? And if not, how much am I missing out on, with not having 64bit, especially with having 4 gigabytes of ram?
I am wanting to upgrade my computer from xp to 7 ultimate. It says to backup all files onto external hard drive but i don't have one. what would be a good program to use for this. after up grade will i be able to put all the files back on the computer without all the xp extras?
I know that one copy of windows 7 can only activate one computer. I have two, one already with windows 7 32bit installed and one without windows 7. I plan on buying a new one, installing windows 7 on my second computer and upgrading windows 7 to 64bit on the other. If I upgrade, will windows use the old activation key or require me to enter a new one, because that computer came with windows 7 32bit so I don't have the disc.
I want to upgrade my windows 7 32 bit installation to 64bit so I can add some extra ram to my system, but I was wondering if I do a backup on my 32bit install, format the drive, and then install 64 bit windows 7 and recover from the backup will it work? Can you use a 32 bit backup on a 64 bit machine?
i have brought new desktop and installed windows 7 32 bit and now i would like to install windows 7 64 bit how to do that. is there any other patch should i download... or should i install new operating system itself....
About a week ago I updated my computer to Windows 7 Ultimate. Since then, 90% of the time, when I boot up the computer a black screen appears on my screen and no desktop shows up. I can't do anything like get to to a task manager but the computer works fine in safe mode. Strangely, if I leave the computer for a couple of hours the black screen disappears and everything works perfectly.
So I have the windows 7 32 bit ultimate installed into my new computer by mistake, but im only using 4 out of the 16GB ram that I have. and I am hoping to install the 64 bit instead.however, I do not have the windows 7 32 bits disk as I used my brother's copy. What I DO have is a 64 bit windows 7 ultimate "upgrade" legit download from my school that is burnt into a dis., not sure if it is the same thing as the windows installation disk itself. the size is 3.18 GB..how then, can I change to 64 bit in this case, because when i attempt to simply run the 64 bit upgrade it just say "the installation disk isn't compatible with your version of windows....."
The reason on why i want to upgrade from a 32 bit to 64bit is because i have some extra ram that is not being used. Also i want my computer to be a little bit better when playing my games.
Processor : Intel Core 2 Quad CPU Q8200 @ 2.33GHz 2.34 GHz Memory(RAM) : 4.00 GB System type: 32-bit Operating system Graphics : NVIDIA GeForce G100 64-bit capable Yes Model : Aspire M5700
I am trying to go from 32 bit Vista to 64 bit Windows 7. The 32 bit Vista was installed by mistake. My system can handle a 64 bit OS. Now I have finally found the time to upgrade. But the 64 bit installation DVD can't be read from my OS. I have tried setting up my CMOS so that I can boot from the DVD but I have run into some issues. First of all, when I look at my keyboard during the boot procedure, I noticed that the little light which indicates that one row of buttons are to be used for F1 - F12 keys, the little green led light goes on and off. Sometimes, during the boot process, it is on, sometimes it is off.
The CMOS procedure tells me I can hit F12 and set the boot order. I can hit F12 but when I go into that menu, I notice my keyboard is dead. The CPU does not accept any commands from me. So I need to power off and power on and try again. The CMOS procedure tells me I can hit DEL and that launches the whole CMOS utility. There I can set the boot order so that the DVD is run first. But when I save and exit, I notice my keyboard is dead again. This time, the screen is showing things being set and loaded and I am prompted to hit any key to show I am sure that I want to boot from the DVD.
I hit the Y key and I hit the spacebar, but it becomes clear that my input is ignored since my keyboard is being ignored. And the ol' Vista OS is loaded. Is there any way to set things up in the VISTA OS to force a boot from the DVD? I guess I can load the OS in save mode and format the C drive, but if I do that I might risk having a dead computer since the CMOS does not seem to be trusting enough to boot from the DVD drive even if you tell it to.
Microsoft has this page of links: [URL] And then there is this link: [URL]
And the Notes section specifies that I need boot off the DVD drive: "To install a 64-bit version of Windows 7 on a computer running a 32-bit version of Windows, you'll need to start, or boot, your computer using a 64-bit Windows 7 installation disc or files."
i have an hp laptop which had windows 7 home basic 32 bit installed from the factory and has a recovery drive (which i suppose all hp laptops have ) and i havent made a copy of it on cd/dvd i saw my friend using windows 7 ultimate it was good so i was thinking i should upgrade it too from home basic to ultimate i tried from the inbuilt upgrader but it says i cant upgrade from this copy of windows so i bought windows 7 ultimate cd now the problem is that i was thinking if i install ultimate will the home basic stay and will the recovery drive stay i really want them to stay so before installing ultimate i wanted to ask will it affect the home basic and the recovery drive?
i just wanted to ask one simple question, and that is, " How can i upgrade windows 7 home premium to windwos 7 ultimate without losing any data, programs, movies, music and documents on my hard drive?" when i boot from cd and install, does it keep everything?
In case anyone is running into issues trying to upgrade Windows 7 Home Premium to Ultimate, I did the following things and got it to work. I ran into the "Can't upgrade. Need clean install" issue, and the "you have a later version" issue.
1. Changed the two registry keys in Hkey Local MachineSoftwareMicrosoftWindowsNTCurrentVersion Changed Edition ID to "Enterprise".Product Name to "Windows 7 Enterprise"
2. Browsed the Windows 7 Ultimate CD directory, found the Setup.exe file, right mouse clicked it, selected "properties", and told 7 that I wanted to run this file in Vista Version 2.
Then ran setup from Windows 7 Home Premium.You obviously need an upgrade license for this to work, but I had just purchased one.
I just preorded the windows 7 upgrade and I'm wondering, is it possible for me to "upgrade" (Clean install) my windows xp 32 bit to 64bit windows 7? I've read the windows 7 FAQ and it said of your upgrading from XP, a clean install is required to upgrade but does the upgrade offer allow for xp 32bit to be upgraded to w7 64bit?
My OS is XP Pro 32-bit. Using Easy Transfer 32-bit saved selected files to external HD. After installing Win 7 64-bit, can I use the resident Easy Transfer to reapply/import the earlier saved files?
I have an Acer AOD260 which is came with Windows 7 Starter. I want to upgrade it to Windows 7 Ultimate , is it will run smoothly? The netbook came with Intel Atom Processor and 1 GB ram only.
Recently, going back over my quasi-gaming rig, I found out that my processor (Intel Pentium Dual-Core E5200) is 64-bit, not 32. I've been running 32-bit Windows 7 ever since I got it. When I bought Windows 7, I did so off of the Microsoft store, so I always have the option to go back into my purchase history and download a new .iso of either the 32- or 64-bit release. I did so, and ran Microsoft's USB/DVD tool for Windows 7 to put it on a USB drive (I didn't have any DVD-R's on hand) and it all seemed to work perfectly fine. But when I try to boot from the USB drive, it goes from the "Windows is loading files" screen to the "Starting Windows" screen, then gives me an unexpected error and forces me to reboot. I already tried redownloading the .iso, in case it was a corrupt download.
I have a computer running a 32 bit oem version of windows 7 home. I really need to change this to a 64 bit version. I do not want to do this illegally. Can I buy this upgrade copy of 7 professional, perform a clean install of windows prof. 64 bit with the upgrade disc, and then use my current oem 32 bit home disc and or license key, to validate that i do in fact have a copy of windows currently.
So technically I wont be "Upgrading" from 32 to 64, I will be re-installing. I have asked several tech savy friends, and while they don't think it cant work, they are unsure. Essentially I am asking if anyone knows what validation windows requires for its upgrade discs. I am given to understand it requires you to put in your original windows disc at some point, and i assume your original key, but will it accept a 32 bit disc/key?