External Usb 2.0 Sata Not Recognised - Windows 7 Ultimate?
Nov 24, 2011My sata usb 2.0 external drive is not being recognised in windows 7 ultimate 32bit.all my other usb devices work fine when plugged in.
View 2 Replies
ADVERTISEMENT
External Hard Drive Not Recognised Following Windows Update
Apr 14, 2011I have a Maxtor 500GB stand alone hard drive which I originally bought for a Vista laptop, but have also been using it on my new Windows 7 laptop.It has been absolutely fine for the 6 months that I've been on Windows 7, but today Windows Update decided that I needed 27 (count 'em!) updates to be installed an run - mostly for MS Office.
View 9 Replies View RelatedSATA Drives Showing Up As SCSI Windows 7 Ultimate?
Jan 17, 2012I've been reading about issues with people having problems with their SSD's not being reconized by Windows 7 Ultimate.but my WD 600gig STAT III Raptor is listed as a SCSI as well. I assume the problem is with my Marvell Driver.I bought this 60gig OCZ Vertex 3 SATA III drive for a Boot drive and had a pain installing drivers for it on a clean install of windows. I plugged it, and my WD Raptor both into the 2 SATA III ports that I have on my ASUS Rampage III MB. I set the Drives to ACHI not IDE. Tried to install Windows, had to force windows to accept the Marvell Drivers...but finally got it installed.Now Im stuck with the OCZ SSD and the Raptor both at SCSI speeds...not able to get them reconized my Windows 7 Ult as SATA drives.Should I try uninstalling the Marvell and JBMicron drivers and let Windows try and install drivers that will work? Funny thing is, I know that windows is reconizing the SSD as a SSD because of the Disk Defrag has been disabled on it...and was able to get some info off the drive via Intels SSD toolbox....OCZ's tool box wont reconize it unless you use Windows drivers. I had to install the Marvell Drivers to install Windows, Windows wouldn't reconize either drive plugged into the SATA III ports.I've tried bout everything, even tried the reg. fix via the Windows Helper with no luck.
View 1 Replies View RelatedExternal HDD To SATA Fail
Oct 30, 2012I had a new external HDD WD My Book Essential USB 3.0 (2TB) 6 month ago. All was good until two days ago. I rebooted my computer and I won't boot up. After disconnecting WD HDD it work perfectly But after I turned my PC off, and tried to turn it on, again it won't boot up with the HDD connected AND some weird ticking noise started in HDD itself. I sounds like it's trying to boot but failing and trying again. So I disconnected, boot up the system and then plugged it in. Nothing Not in explorer, not in disk management not in Acronis program, nothing.I rebooted and it showed and Local Disk R, but I can't even start disk management or open it with explorer, or even open any program to be able to see/fix it. In the end, HDD wasn't even turning on.So the next day I called tech support of WD. They told me standard stuff, like "Disconnect, Reconnect Try another port, etc ". Nothing. By warranty they can replace it, BUT I don't care about the drive itself, I need data. In this case they can't help me. All they told me is to contact special company for that, and it's gonna cost me up to 1000$.After that call, I noticed a burning smell from HDD. It was connected to power and USB. I disconnected and I opened the case of my HDD. SATA HDD itself seams to be fine, but the connection board (with USB and power) burned.So, I connected directly via SATA to my PC. And that's when the fun starts: BIOS did not recognized it. I switched the SATA port. BIOS showed the model and everything but it gives me "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed." Reboot.In different software... NOTHING. Reboot again: and again "Ultra DMA Mode-5 S.M.A.R.T Capable but Command Failed". Reboot. S.M.A.R.T. Command Failed... Reboot 5 times, all good. Started LiveBoot CD by Wondershare. It found my HDD and UNKNOWN. Was trying to recover data from it, program freeze. Reboot again. Was trying to fix mbr with Win 7 Boot Cd, nothing cuz it can't see were to fix mbr. Reboot. Started HDAT2. Nothing. Reboot 10 times, and HDAT2 finally can see my HDD. Before I start any test I shows me read error from UNKNOWN DEVICE. Started "hdat2 most powerful test". Nothing. No errors was found. O_o. Also I try Read MBR with the same HDAT2. Everything 0/0/0/0. So what else I can possibly try?? Oh yeah, when I connected my HDD via SATA, that "boot or not to boot" sound was still there.
View 5 Replies View RelatedUSB.E-SATA External Hard Drives
May 6, 2011I am currently running Ubuntu 11.04 on my HP (DV5 1110em) laptop from an external USB 2 Buffalo ministation hard drive, I have noticed my machine is equipped with an E-SATA port. Would using an e-sata external hard drive be any faster that the usb option ?.
View 3 Replies View RelatedNot Able To Change Ownership On External Sata Drive?
Feb 16, 2012I've googled and tried many methods to fix this over the last two hours but nothing so far as worked.I have an old hard drive with data on it from my old Windows XP Professional computer attached to a usb port on a converter. Win 7 claims it cannot display the owner, if I try to take permission it says permission denied. If I take down the UAC the hard drive no longer appears in My Computer.I have tried to go in as the administrator account specifically it keeps giving me access denied. I tried using the administrator account in normal mode and using the command line 'take owner' command and it says access denied.I tried going into administrator safe mode, but again the external hard drive won't show up.Shortly I am planning on reformatting the current C drive and putting on Windows Xp Pro 32 bit, Win 7 and Ubuntu. Should I just wait till do that and hope it will miraculously identify it if I take control of it with Xp Pro? I'm really hoping this isn't going to indicate problems sharing files between the two operating systems on the same hard drive.
View 1 Replies View RelatedWindows 7 Ultimate X64 In An External Enclouser
Jun 24, 2012I have to go away for a week or so, and wanted to bring my Computer with me. Since, my computer is a desktop I purchased an External Hard Drive Enclosure (Link: Newegg.com - SilverStone TS07B Aluminum / Plastic 3.5" Black USB 3.0 Tool-less Design External Enclosure). I installed my Hard Drive (Seagate 1 TB 7200 RPM HDD 6.0 SATA), in it. I then, proceded to do a "Test Boot." I booted off of it and the Computer Restarted. I tried again, it crashed and Restarted. I tried it on another computer I had and it flashed a BSOD for .2 seconds.
View 1 Replies View RelatedWindows 7 Ultimate Installation On LG External HDD?
Nov 1, 2012I just wanna know how to install Windows 7 Ultimate on my External HDD. First, I tried installing it but it prompts a warning message about BIOS or something I can't remember. My PC's OS now is Windows 7 Home Basic 32-bit, and I have a 2 GB RAM, and I don't have a video card. So, what should I do? I want to install Ultimate on my External HDD if possible.
View 1 Replies View RelatedExternal Sata Drive Will Not Keep Assigned Drive Letter?
Jul 16, 2011I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
View 6 Replies View RelatedProgram Not Recognised In Windows 7?
Jan 27, 2013I have a problem with an existing program I have had for years. I had the installation program on my disk, but after re installing Win 7 I somehow have lost the installation program. It is an old one and therefore not awailable any more. I have the program installed on an disk partition, buit when clicking on the icon it tells me that window cannot find language.dll.I have the program installed on another Computer running XP, but it is very slow.Is there any way I can get into Window and install the missing file myself. Alternative would be to remove the XP disk from the old computer and install it on the newer computer, but I might get problem with having both XP and Win 7 running on the same computer.
View 2 Replies View RelatedChanged The SATA Controller From AHCI To Raid SATA Result = FAILED?
Aug 10, 2010Very little, all the parts were shipped here about four days ago and I spent a couple of hours putting them together. I ran into a hiccup when Windows 7 Home Premium would not get past the extracting phase of the installation, kicking up the error in this thread. I began the first install on a 20GB partition, when that failed I tried just installing it on a single partition. When that failed I tried removing all the partitions and just installing on the unformatted drive, in it's entirety (seemed weird but others said they had luck with this).Testing Methodology:
At the end of each attempted solution I tried to install Windows again.My keyboard is a USB keyboard. All of my boot testing is done with a bootable USB that I have running MS-DOS 6.22. What I Have Tried:Solution 1: First I went into the bios and changed the SATA controller from AHCI to Raid SATA Result = FAILEDSolution 2: I tried burning OEM Windows disk from Microsoft to an iso at the lowest speed possible for my DVD burner (4x).Result = FAILEDSolution 3: At this point I had created and deleted so many partitions I was concerned it may be having an effect on the install. So I went to Samsung's website and grabbed their HDD utility tool. I figured let's kill two birds with one stone and test the drive while also restoring it to it's original state. So I did a low level format and then ran the HDD diagnostic. All came back with no errors. Result = FAILED
On to memory...Solution 4: I downloaded Microsoft's Memory Diagnostic Tool and let it run overnight. It returned no errors. So I decided to use MemTest86 4.1 and let it run for 10 passes, I did find errors then. As of now I am running each module of memory one by one to determine if it is a problem with them or the sockets on the motherboard. So far I have been unable to reproduce the errors I got when both modules were running together. As a precaution I double checked the motherboards specifications on the socket order for memory, all is to specs. Result = [PENDING]What's Next:After my current memory test ends, I plan on checking my BIOS to see if the correct memory speeds were detected in the auto detection. If at that point I'm still unable to reproduce the memory errors, I'll put both memory modules back into the system and run the testing again to see if I can reproduce the errors I got the first time.
DVD Not Recognised Intermittently By Windows 7 Preofessional 64bit
Nov 22, 2011I have a Blu-Ray/DVD drive on my PC (its a brans new PC).When I first start windows up the drive genreally seems to be recognised by windows (i.e. I can see it in windows explorer), however at some point windows stops recognising the DVD drive forcing me to restart the PC if I want to get my DVD out.I realize there is a fix where you change the registry settings, but given that the DVD srive works when I restart the PC I'm not sure that fix if applicable here?
View 9 Replies View RelatedWiFi Printer Not Recognised By Windows 7 Laptop?
Jan 20, 2012I have got a Epson SX235W. It can be used with either cable or wifi. I have beenunsuccesfull in setting the wireless side up, cable is ok. The laptop does not find it when scanning to look for it during the setup phase. I uninstalled it and run setup again but only tried to do the wireless part and still no joy. The Epson site is no good and does n The WiFi on the computer and printer is switched on and I had the printer on the table beside the laptop so distance apart was not an issue. I have read that I need to go to register the mac address with the computer but dont know how to do this or even find the mac address for the printer.
View 9 Replies View RelatedSATA 3 Not Working On Asus P6X58D-E Motherboard With SATA III Support?
Jun 27, 2012Yesterday I had a PC technician around to see why my PC was not booting-up properly and also to change my SSD to a larger SSD. As I am visually challenged I cannot do hardware upgrades etc, so I got a Techie guy in. We used Zinstall HDD by-the-way and I would highly recommend this application for such a job plus, it is extremely fast.Anyway, while he was diagnosing my boot-up issue he discovered I had a malfunctioning network card; while removing this, he noticed all the SATA settings were set to SATA 2.When he reset these to SATA 3, the PC would not start-up! When he set them again to SATA 2 there was no problem and it worked fine?
View 9 Replies View RelatedInstall Sata Hard Drive As A Slave Where The Master Is Also A Sata?
Aug 10, 2011i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies View RelatedSATA-II Drive On SATA Raid Controller?
May 7, 2011i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?
View 5 Replies View RelatedUSB Device Not Recognised
Oct 4, 2012I am getting reports in windows and device manager of an unknown device attached to computer, but there are no devices attached. Hardware error has been ruled out by a computer technician but still get messages. (screenshots attached)
View 3 Replies View RelatedUSB Device Not Recognised
Dec 23, 2009I have a new computer running Windows 7 Home Premium and a new laptop with the same o/s.
I have a new Panasonic Lumix DMC-FX150 and an old Canon camera.
According to Panasonic the driver for their camera is incorporated in 7. I tried the canon and there was no problem downloading.
The Lumix down loads perfectly on the laptop without any drivers being added.
When I try to download the Lumix to the computer all I get is
"one of the usb devices has malfunctioned and windows does not recognise it"
When I check the message it says "Unknown device. (check connections) If windows still does not recognise it replace the device"
Why does it work with the laptop and not the computer? Panasonic are no help once I said it worked on the laptop.
Blue Ray Not Recognised
Oct 14, 2009i have a sony vaio fw21 e ..with optiarc bc 5500 S... recently i have installed windows 7 64 bit build 7600... .. now windows can t play blu ray disc..cd and dvd are working perfect..only blue ray it doesnt work .. ..i put a blu ray disc inside.. makes a weird sound( that sound like the disc is broken ) , and it says in my computer no disc.
View 4 Replies View RelatedPartitions Not Being Recognised
Jul 10, 2009I'm currently running Windows XP SP2 and wanting to upgrade to Windows 7. I have set aside a 20GB partition and i'm wanting to make a fresh instal, not fussed about keep XP. I have 2 internal hard drives @ 149GB each. But, Win 7 fails to recognise them even when i have set a partition on the empty HD! It says something like 'setup was unable to create a new system partition or locate existing system partition ' What does this mean?
View 9 Replies View RelatedPassword Not Recognised
Nov 27, 2011i cant seem to log on as administrator anymore,, password not recognized.what do i do ?
View 4 Replies View RelatedDVD Drive Not Recognised?
May 2, 2012I've recently purchased a Zoomstorm PC and am running Windows 7 professional. I was happily going along when the dvd driver stopped being seen. It is there in the BIOS. I have checked the SATA cables, I have checked the filters in the regedit - I have even been on the MShelp forums and done all advised. But to no avail. The DVD does open and shut and I think mechanically it is fine. I do think that I am missing some kind of driver - that isn't supported by Windows 7. Although it was there initially. I can't re-install Windows 7 as its ...my DVD drive!! The DVD is a Samsung
View 4 Replies View RelatedSecond Hard Drive Not Being Recognised
Jul 18, 2011I'm a complete newbie on Windows 7, having been a diehard XP user. I'm actually fielding this question from my XP computer.However, I now have a new computer running [b]Win7 Home Premium (64-bit)[/b].Currently, it's completely 'clean', no other software installed bar Win7. I haven't even connected it to the web yet! There are two 500Gb hard drives installed.However, when I click on 'Computer', all I see is notification of ONE drive only:' [code] When I right-click 'System Reserved', I have the option: 'Change Drive Letter & Paths'. I don't have that option if I click '465Gb Unallocated'If I give 'System Reserved' a letter, will this then designate my 'missing' drive accordingly?If I then click 'Computer' will it show 'Hard Drive (1) and 'Hard Drive (2)?All I want to do is 'see and access' the second drive and be able to add files etc to it whenever I want. Just the way I can with XP.
View 4 Replies View RelatedIomega Prestige 1Tb USB HDD Not Recognised
Aug 17, 2009I have a problem I hope someone can help with. I have an Iomega Prestige 1Tb USB HDD which is working fine. I have however just insstalled Windows 7 RC on an old PC to try it out. The installation went fine and I connected the USB HDD and copied over a number of files to help further set it up to meet my requirements with no problem.
I then installed drivers for my Speedtouch 330 USB Modem and now the USB HDD is not working. I have tried uninstalling the Modem Driver and uninstalling the USB HD Driver and then reconnecting but with no success. I continue to get a Windows 7 error message. The USB HDD is still working perfectly on my XP laptop.
I hope someone can suggest a solution before I try a complete Windows 7 reinstall?
Network Password Not Recognised
Nov 29, 2009I have a desktop and a laptop. Both Windows 7
If I try to access files on desktop I am asked for a password. When I put in the password which is the same as that in the windows vault on both computers I am toldit is incorrect.
It may be wanting aassword for the computer rather than the workgroup but I cannot sort it out.
I was told networking was easy on windows 7 but its much harder that when my desktop was XP and laptop vista!
Bluetooth Device Not Recognised?
Feb 8, 2013Running Win 7/64 Home Premium. I have a Bluetooth USB dongle and on insertion Windows goes away and comes back saying it has found the driver and all is well but I cannot find a way for Win to recognise my BT headset. Is there a way to force a connection such as thepairing process for mobiles?
View 1 Replies View RelatedDvd Rom Not Recognised Error Code 39?
Sep 17, 2011Dvd rom not recognised error code 39?
View 1 Replies View RelatedDvd Rom Not Recognised Error Code 39?
Dec 10, 2011My DVD is not recognised by windows 7 64 bit.
View 2 Replies View RelatedHDD Failure / HDD Not Recognised In Bios
Jun 9, 2012I attempted to upgrade my 64bit vista to windows 7 yesterday, and somehow managed to screw it up. After supposedly completing the upgrade my system restarted then told me the upgrade had failed and everything from my HDD was deleted. I then proceeded with a clean installation on my other HDD, everything went okay and it seemed fine until I restarted and it loaded vista again from my other HDD.I went into bios upon boot and tried to change the load order, however it would seem only one of my HDDs is recognised. Also, the vista HDD is now failing apparently (yay!) which I'm not too fussed about, I just want to get a working system again. I checked device manager to try and see whether my other HDD was recognised there and it is, however it would seem that both of my HDDs are exactly the same make/model. Presuming my vista HDD is on its way out, how can I sort my computer so that it boots from the 7 HDD.
View 9 Replies View RelatedHDD SATA 3 (6.0Gb/s) Works With SATA 2 (3.0Gb/s) Controller?
May 22, 2011My MB supports only SATA 2 but in my city, the HDD SATA 3 is more cheap than SATA 2. If I buy the HDD SATA 3 it will work with my MB SATA 2 controller?
View 5 Replies View RelatedAsus P6X58D-E - SATA II SSD Or SATA III SSD?
Mar 5, 2012i'm looking to upgrade from a HDD to SSD. I've been reading online about my board and apparently the marvell 9128 controller sucks speed wise. I was looking at the Corsair Force 3 because of the read/write speeds. Upon doing more digging though it looks like id be better off running a drive on the SATA 2 ports.
View 2 Replies View Related
