DVD Not Recognised Intermittently By Windows 7 Preofessional 64bit
Nov 22, 2011
I have a Blu-Ray/DVD drive on my PC (its a brans new PC).When I first start windows up the drive genreally seems to be recognised by windows (i.e. I can see it in windows explorer), however at some point windows stops recognising the DVD drive forcing me to restart the PC if I want to get my DVD out.I realize there is a fix where you change the registry settings, but given that the DVD srive works when I restart the PC I'm not sure that fix if applicable here?
View 9 Replies
ADVERTISEMENT
Jan 27, 2013
I have a problem with an existing program I have had for years. I had the installation program on my disk, but after re installing Win 7 I somehow have lost the installation program. It is an old one and therefore not awailable any more. I have the program installed on an disk partition, buit when clicking on the icon it tells me that window cannot find language.dll.I have the program installed on another Computer running XP, but it is very slow.Is there any way I can get into Window and install the missing file myself. Alternative would be to remove the XP disk from the old computer and install it on the newer computer, but I might get problem with having both XP and Win 7 running on the same computer.
View 2 Replies
View Related
Mar 3, 2011
I have a Toshiba sattelite A215 that I upgraded from Vista Home Premium to 32 bit Windows 7 Pro. I did a clean install from a legit copy of 7. Prior to installing, I ran the upgrade advisor and there was one device (listed as unknown) that was listed as not compatible.A few days after install, after the laptop sits idle for a few hours, when I open it up and start navigating, it will freeze up. I power off using the power button, power back up, and it works fine. Next time I try to use it after it sits idle for a while, again it freezes.This process is repeated nearly every time I start using it after it sits idle for a few hours
[code]...
View 5 Replies
View Related
Nov 24, 2011
My sata usb 2.0 external drive is not being recognised in windows 7 ultimate 32bit.all my other usb devices work fine when plugged in.
View 2 Replies
View Related
Jan 20, 2012
I have got a Epson SX235W. It can be used with either cable or wifi. I have beenunsuccesfull in setting the wireless side up, cable is ok. The laptop does not find it when scanning to look for it during the setup phase. I uninstalled it and run setup again but only tried to do the wireless part and still no joy. The Epson site is no good and does n The WiFi on the computer and printer is switched on and I had the printer on the table beside the laptop so distance apart was not an issue. I have read that I need to go to register the mac address with the computer but dont know how to do this or even find the mac address for the printer.
View 9 Replies
View Related
Dec 2, 2011
I have been running Windows 7 Ultimate x 64 bit on my pc for 6 months or so when recently it just started freezing up either whilst loading or whilst im on the desktop screen. I have checked memory chips for error and its returned back no errors found. I have to sometimes reboot the pc when its frozen and then it doesn't load up. It freezes just after windows logo appears and just halts for ages. Sometimes it doesnt even get that far. I have a memory and cpu gauge on my desktop which constantly has memory on about 56% usage and cpu on 0.2%.
I have even resinstalled a backup image i have created of the operating system but now its even worse. I have Virgin media security software installed.
View 1 Replies
View Related
Apr 14, 2011
I have a Maxtor 500GB stand alone hard drive which I originally bought for a Vista laptop, but have also been using it on my new Windows 7 laptop.It has been absolutely fine for the 6 months that I've been on Windows 7, but today Windows Update decided that I needed 27 (count 'em!) updates to be installed an run - mostly for MS Office.
View 9 Replies
View Related
May 3, 2011
When I'm disconnected, I lose all connectivity both to the internet and on the local lan, so pinging (for example) Google will time out, but also pinging 192.168.1.1 (the router's lan ip address) will also time out
Fix : Start -> dev manager -> network adapter. Double click, open her up and then under "advanced", take a look at "Link Speed & Duplex".
If this is set to auto-negotiation, try re-setting it to 10 or 100mbps Full Duplex, re-start your computer.
It's the network driver that costs me hours of hunting & searching. MOTHERBOARD : ASUS IPIBL-LB Integrated LAN : Realtek 8111C 10/100/1000 Mb/s (Gigabit Ethernet)
View 1 Replies
View Related
Nov 2, 2012
I am facing an issue where the wireless connectivity drops intermittently for my Win 7 Home Basic Notebook.Within less then a minute the connection is resumed. Earlier I thought that it was an issue with my service provider.But then I did not face this issue with my Win XP notebook. I mean, both the notebooks are connected and then the wireless connection of Win 7 drops for a minute and then reconnects. During the period when the connection drops, I can still see my SSID, and also checked that the Win XP was connected and I could access the internet.What could be the root cause and the possible solutions for this issue?It is really frustrating when the connection drops when I am downloading big files and I have to start all over.
View 4 Replies
View Related
Aug 14, 2011
I have a new HP Notebook with Windows 7. Downloaded my old Office 2003. However, Outlook only works intermittently without any rhyme or reason. I've kept a log since August 5 for being on and being off. It is mostly off. The # of the error message that comes up is (0x800CCC0F0), it says: "The connection of the server was interrupted. If this problem continues, contact our server administrator or Internet service provider." My internet provider is AT&T u-verse, they tell me that they do not deal with Outlook problems, I should use webmail. Of course I use it to get my emails but don't anybody tell me what to use, I have used Outlook for the past 15+ years and I intend to continue using it. I use the very unimaginative webmail out of necessity. AT&T also tells me that that I can subscribe with a one year contact $ 15 a month to their special service to address my type of problem.
View 8 Replies
View Related
Feb 20, 2012
We have 2 x Server 2008 R2 domain controllers and 120+ Windows 7 x64 clients. We have a print server which runs Server 2008 R2.We have several other servers which also run Server 2008 R2. An issue occurs intermittently and apparently at random, whereby a client will be unable to resolve the host/computer name of the print server. When the issue occurs, we have confirmed the following: - The client has a valid IP address.The client DNS server addresses are correct. - The client can ping the IP address of the print server. - The client can resolve the IP address of the print server by using nslookup and the server�s FQDN. - The client cannot resolve the IP address of the print server by using nslookup and the host/computer name of the print server.The issue can occur regardless of which domain controller the client used to log on. - When the output of ipconfig /display is printed to a text file, many of the other servers in our domain are present in the DNS cache but the print server is not. After the ipconfig /flushdns command is executed, the client can resolve the host/computer name of the print server immediately.
View 2 Replies
View Related
Oct 4, 2012
I am getting reports in windows and device manager of an unknown device attached to computer, but there are no devices attached. Hardware error has been ruled out by a computer technician but still get messages. (screenshots attached)
View 3 Replies
View Related
Dec 23, 2009
I have a new computer running Windows 7 Home Premium and a new laptop with the same o/s.
I have a new Panasonic Lumix DMC-FX150 and an old Canon camera.
According to Panasonic the driver for their camera is incorporated in 7. I tried the canon and there was no problem downloading.
The Lumix down loads perfectly on the laptop without any drivers being added.
When I try to download the Lumix to the computer all I get is
"one of the usb devices has malfunctioned and windows does not recognise it"
When I check the message it says "Unknown device. (check connections) If windows still does not recognise it replace the device"
Why does it work with the laptop and not the computer? Panasonic are no help once I said it worked on the laptop.
View 4 Replies
View Related
Oct 14, 2009
i have a sony vaio fw21 e ..with optiarc bc 5500 S... recently i have installed windows 7 64 bit build 7600... .. now windows can t play blu ray disc..cd and dvd are working perfect..only blue ray it doesnt work .. ..i put a blu ray disc inside.. makes a weird sound( that sound like the disc is broken ) , and it says in my computer no disc.
View 4 Replies
View Related
Jul 10, 2009
I'm currently running Windows XP SP2 and wanting to upgrade to Windows 7. I have set aside a 20GB partition and i'm wanting to make a fresh instal, not fussed about keep XP. I have 2 internal hard drives @ 149GB each. But, Win 7 fails to recognise them even when i have set a partition on the empty HD! It says something like 'setup was unable to create a new system partition or locate existing system partition ' What does this mean?
View 9 Replies
View Related
Nov 27, 2011
i cant seem to log on as administrator anymore,, password not recognized.what do i do ?
View 4 Replies
View Related
May 2, 2012
I've recently purchased a Zoomstorm PC and am running Windows 7 professional. I was happily going along when the dvd driver stopped being seen. It is there in the BIOS. I have checked the SATA cables, I have checked the filters in the regedit - I have even been on the MShelp forums and done all advised. But to no avail. The DVD does open and shut and I think mechanically it is fine. I do think that I am missing some kind of driver - that isn't supported by Windows 7. Although it was there initially. I can't re-install Windows 7 as its ...my DVD drive!! The DVD is a Samsung
View 4 Replies
View Related
Jul 18, 2011
I'm a complete newbie on Windows 7, having been a diehard XP user. I'm actually fielding this question from my XP computer.However, I now have a new computer running [b]Win7 Home Premium (64-bit)[/b].Currently, it's completely 'clean', no other software installed bar Win7. I haven't even connected it to the web yet! There are two 500Gb hard drives installed.However, when I click on 'Computer', all I see is notification of ONE drive only:' [code] When I right-click 'System Reserved', I have the option: 'Change Drive Letter & Paths'. I don't have that option if I click '465Gb Unallocated'If I give 'System Reserved' a letter, will this then designate my 'missing' drive accordingly?If I then click 'Computer' will it show 'Hard Drive (1) and 'Hard Drive (2)?All I want to do is 'see and access' the second drive and be able to add files etc to it whenever I want. Just the way I can with XP.
View 4 Replies
View Related
Aug 17, 2009
I have a problem I hope someone can help with. I have an Iomega Prestige 1Tb USB HDD which is working fine. I have however just insstalled Windows 7 RC on an old PC to try it out. The installation went fine and I connected the USB HDD and copied over a number of files to help further set it up to meet my requirements with no problem.
I then installed drivers for my Speedtouch 330 USB Modem and now the USB HDD is not working. I have tried uninstalling the Modem Driver and uninstalling the USB HD Driver and then reconnecting but with no success. I continue to get a Windows 7 error message. The USB HDD is still working perfectly on my XP laptop.
I hope someone can suggest a solution before I try a complete Windows 7 reinstall?
View 0 Replies
View Related
Nov 29, 2009
I have a desktop and a laptop. Both Windows 7
If I try to access files on desktop I am asked for a password. When I put in the password which is the same as that in the windows vault on both computers I am toldit is incorrect.
It may be wanting aassword for the computer rather than the workgroup but I cannot sort it out.
I was told networking was easy on windows 7 but its much harder that when my desktop was XP and laptop vista!
View 2 Replies
View Related
Feb 8, 2013
Running Win 7/64 Home Premium. I have a Bluetooth USB dongle and on insertion Windows goes away and comes back saying it has found the driver and all is well but I cannot find a way for Win to recognise my BT headset. Is there a way to force a connection such as thepairing process for mobiles?
View 1 Replies
View Related
Sep 17, 2011
Dvd rom not recognised error code 39?
View 1 Replies
View Related
Dec 10, 2011
My DVD is not recognised by windows 7 64 bit.
View 2 Replies
View Related
Jun 9, 2012
I attempted to upgrade my 64bit vista to windows 7 yesterday, and somehow managed to screw it up. After supposedly completing the upgrade my system restarted then told me the upgrade had failed and everything from my HDD was deleted. I then proceeded with a clean installation on my other HDD, everything went okay and it seemed fine until I restarted and it loaded vista again from my other HDD.I went into bios upon boot and tried to change the load order, however it would seem only one of my HDDs is recognised. Also, the vista HDD is now failing apparently (yay!) which I'm not too fussed about, I just want to get a working system again. I checked device manager to try and see whether my other HDD was recognised there and it is, however it would seem that both of my HDDs are exactly the same make/model. Presuming my vista HDD is on its way out, how can I sort my computer so that it boots from the 7 HDD.
View 9 Replies
View Related
May 19, 2011
I have a playsation controller adaptor which will not connect properly with windows 7.I can see that this is a fairly common problem as there are quite a few threads on other forums about this particular issue. Unfortunately having read through all of them the solutions offered (and seemingly successful for adaptors of other makes) do not work for me.A little history: worked perfectly on the machine I am using before upgrading from XP to 7. I didn't have to install specific drivers as the drivers XP provided were sufficient.Symptoms: pad/Controller is not recognised in "game controller settings" (joy.cpl found in system32 folder) which on XP allowed me to configure the pad. (There is no pad showing in the window under controller) The controller does show up in the control Panel's "devices and printers" but as "HID-compliant game controller" (it also doesn't show in the device manager under "sound, video and game controllers" only in the Human interface devices tree) The pad is therefore not recognised by, amongst others, pro evolution 11.
Checks: I know the hardware I have works as I have a clever little piece of software called joytokey which substitutes buttons pressed on the pad for keys on my keyboard. Indeed I have typed this entire post using the offending pad. (I haven't really but the point is that I could have done showing that the controller is recognised to a degree and working). Why don't you just use the joytokey software to play pro evo? I hear you ask. I do, however as good as that software is it can't mimic the two joysticks on the PS2 pad which limits the functionality I have in that game. (Like going to war and only being able to use a pistol)
The most damning piece of evidence I have to prove that the hardware works fully is that I have microsoft's very own flight simulator X and without the trickery of joytokey or any type of manual configuring I am able to control the vehicles using my playstion 2 pads. (For those of you who have never played the game, everything important is controlled using the two joysticks on the ps2 pad). Just get an Xbox controller they are not that expensive, in fact in the time it has taken you to create this thread you could have earned enough for a few of them! My, you're a talkative fella. I could buy one but I really prefer the layout and feel of the PS2 pads.
So there we have it. The pad and adaptor work perfectly but only on games that don't require Windows 7 to see the pad in the game controller settings.I have tried the closest thing I could find to the manufacturers driver and one I found at another forum, [URL] neither worked properly for my particular adaptor. (Pad still did not show up in joy.cpl and also caused the pad to vibrate uncontrollably and most functionality stopped in games I tested it in)all I need is the driver windows developed for windows XP but if this is microsofts way of forcing people to buy and use one of their XBox controllers then I'll have to admit defeat.
View 7 Replies
View Related
Sep 17, 2012
my usb scandisk 4 gb pendrive not not working as soon as i connected my pend drive in usb port lite of pen drive blows constant and and error show 43.
View 1 Replies
View Related
Sep 6, 2012
For a little while now, completely randomly it would seem, the USB ports on the back of my PC will seemingly cut in and out indefinitely until I do a restart.
If the devices that were plugged into the back USB ports are switched to the USB ports on the front of the case, there isn't a problem at all.
I'm almost certain that the problem is not with my mouse and keyboard as like I said, plugged into the front they work fine.
View 6 Replies
View Related
Apr 8, 2011
How do I remove radio from my laptop...it's annoying, and it just comes on intermittently...
View 2 Replies
View Related
May 10, 2011
I am running two systems off one laptop. One 64bit and the other 32bit.On the 64bit system all is well and working fine, but on the 32 bit system there is no wireless adaper been detected in the device manager. As i say, the actual wireless card is fine as its working perfectly on the 64bit system.What I am asking is: How do I get the device manager to recognise the wireless card within the 32bit system?
View 9 Replies
View Related
Mar 11, 2011
Ever since I installed Windows 7 on my Toshiba Satellite computer, the keyboard unexpectedly stops functioning at times, perhaps once a week. The only solution is to restart the computer.Windows Support says for me to call Toshiba, and Toshiba Support blames it on Windows. It seems obvious (even though nothing is obvious with computers) that the keyboard is in working order - since I can type 99 percent of the time - the glitch has to be with Windows.
View 2 Replies
View Related
Sep 11, 2011
I'm running Windows 7 x64 and I just reformatted and reinstalled a couple weeks ago. I did this because I was messing around with Linux and removed the partition in the wrong drive...sigh. So anyway, Windows 7 was running rock solid prior to this....no problems whatsoever with anything. So after I reinstall Windows I notice my Internet connection drops once in a while. Some days it doesn't do it at all while others it drops multiple times. It's all up to date too. There are two things different in this install though. The first is I updated my BIOS. I did this because I suddenly couldn't access the BIOS or even use F8 on boot up. The second thing is after you install, Windows wants to update my Atheros (I believe it's called) adapter. I didn't do this with the first install because it was working fine. Ok, so there are the two differences. Do you guys think it's the adapter driver or the BIOS update? [code]
View 3 Replies
View Related
