Iomega Prestige 1Tb USB HDD Not Recognised
Aug 17, 2009
I have a problem I hope someone can help with. I have an Iomega Prestige 1Tb USB HDD which is working fine. I have however just insstalled Windows 7 RC on an old PC to try it out. The installation went fine and I connected the USB HDD and copied over a number of files to help further set it up to meet my requirements with no problem.
I then installed drivers for my Speedtouch 330 USB Modem and now the USB HDD is not working. I have tried uninstalling the Modem Driver and uninstalling the USB HD Driver and then reconnecting but with no success. I continue to get a Windows 7 error message. The USB HDD is still working perfectly on my XP laptop.
I hope someone can suggest a solution before I try a complete Windows 7 reinstall?
View 0 Replies
ADVERTISEMENT
Jun 24, 2012
My Iomega 2Tb is not accessible, whenever i ope it it says drive not accessible , paremeter not found.
View 1 Replies
View Related
Oct 4, 2012
I am getting reports in windows and device manager of an unknown device attached to computer, but there are no devices attached. Hardware error has been ruled out by a computer technician but still get messages. (screenshots attached)
View 3 Replies
View Related
Dec 23, 2009
I have a new computer running Windows 7 Home Premium and a new laptop with the same o/s.
I have a new Panasonic Lumix DMC-FX150 and an old Canon camera.
According to Panasonic the driver for their camera is incorporated in 7. I tried the canon and there was no problem downloading.
The Lumix down loads perfectly on the laptop without any drivers being added.
When I try to download the Lumix to the computer all I get is
"one of the usb devices has malfunctioned and windows does not recognise it"
When I check the message it says "Unknown device. (check connections) If windows still does not recognise it replace the device"
Why does it work with the laptop and not the computer? Panasonic are no help once I said it worked on the laptop.
View 4 Replies
View Related
Oct 14, 2009
i have a sony vaio fw21 e ..with optiarc bc 5500 S... recently i have installed windows 7 64 bit build 7600... .. now windows can t play blu ray disc..cd and dvd are working perfect..only blue ray it doesnt work .. ..i put a blu ray disc inside.. makes a weird sound( that sound like the disc is broken ) , and it says in my computer no disc.
View 4 Replies
View Related
Jul 10, 2009
I'm currently running Windows XP SP2 and wanting to upgrade to Windows 7. I have set aside a 20GB partition and i'm wanting to make a fresh instal, not fussed about keep XP. I have 2 internal hard drives @ 149GB each. But, Win 7 fails to recognise them even when i have set a partition on the empty HD! It says something like 'setup was unable to create a new system partition or locate existing system partition ' What does this mean?
View 9 Replies
View Related
Nov 27, 2011
i cant seem to log on as administrator anymore,, password not recognized.what do i do ?
View 4 Replies
View Related
May 2, 2012
I've recently purchased a Zoomstorm PC and am running Windows 7 professional. I was happily going along when the dvd driver stopped being seen. It is there in the BIOS. I have checked the SATA cables, I have checked the filters in the regedit - I have even been on the MShelp forums and done all advised. But to no avail. The DVD does open and shut and I think mechanically it is fine. I do think that I am missing some kind of driver - that isn't supported by Windows 7. Although it was there initially. I can't re-install Windows 7 as its ...my DVD drive!! The DVD is a Samsung
View 4 Replies
View Related
Apr 24, 2012
Driver for iomega hdd 30 for windows 7
View 1 Replies
View Related
Jul 17, 2009
Has anyone tried using an Iomega Zip or Jazz disk with W7?
I work in graphics and ocassionally have to pull info from one of these formats.
Looking at the Iomega site lists support for XP. . . no mention of any x64 platforms or even Vista.
I'm just trying to figure out how far to go in efforts of backwards compatability . . . at least I'm not looking to integrate a Bernoulli Drive.
View 4 Replies
View Related
Dec 1, 2009
I have Windows 7 64 bits in a DELL Laptop Latitude E4300 working fine (more or less). I just plugged into it a USB HD from iomega with 500 GB capacity. I can see this disk without problems in all my XP (32 bits) based systems. But not on Windows 7. When I try to open it I get the error message:
Cannot access F:
The archive is damaged or inaccessible
I know the disk is fine. I have in this very same computer vmware installed with Ubuntu 64 bits where I can mount the HD and see it without problem (?) but not in the host Windows 7 system. I saw a driver installation message the first time I plugged into the laptop on Windows 7 but clearly, this was incorrect.
Should I uninstall the driver and get it from somewhere else other than the default place (which did not seem to work well)?
View 3 Replies
View Related
Jan 27, 2013
I have a problem with an existing program I have had for years. I had the installation program on my disk, but after re installing Win 7 I somehow have lost the installation program. It is an old one and therefore not awailable any more. I have the program installed on an disk partition, buit when clicking on the icon it tells me that window cannot find language.dll.I have the program installed on another Computer running XP, but it is very slow.Is there any way I can get into Window and install the missing file myself. Alternative would be to remove the XP disk from the old computer and install it on the newer computer, but I might get problem with having both XP and Win 7 running on the same computer.
View 2 Replies
View Related
Jul 18, 2011
I'm a complete newbie on Windows 7, having been a diehard XP user. I'm actually fielding this question from my XP computer.However, I now have a new computer running [b]Win7 Home Premium (64-bit)[/b].Currently, it's completely 'clean', no other software installed bar Win7. I haven't even connected it to the web yet! There are two 500Gb hard drives installed.However, when I click on 'Computer', all I see is notification of ONE drive only:' [code] When I right-click 'System Reserved', I have the option: 'Change Drive Letter & Paths'. I don't have that option if I click '465Gb Unallocated'If I give 'System Reserved' a letter, will this then designate my 'missing' drive accordingly?If I then click 'Computer' will it show 'Hard Drive (1) and 'Hard Drive (2)?All I want to do is 'see and access' the second drive and be able to add files etc to it whenever I want. Just the way I can with XP.
View 4 Replies
View Related
Nov 29, 2009
I have a desktop and a laptop. Both Windows 7
If I try to access files on desktop I am asked for a password. When I put in the password which is the same as that in the windows vault on both computers I am toldit is incorrect.
It may be wanting aassword for the computer rather than the workgroup but I cannot sort it out.
I was told networking was easy on windows 7 but its much harder that when my desktop was XP and laptop vista!
View 2 Replies
View Related
Feb 8, 2013
Running Win 7/64 Home Premium. I have a Bluetooth USB dongle and on insertion Windows goes away and comes back saying it has found the driver and all is well but I cannot find a way for Win to recognise my BT headset. Is there a way to force a connection such as thepairing process for mobiles?
View 1 Replies
View Related
Sep 17, 2011
Dvd rom not recognised error code 39?
View 1 Replies
View Related
Dec 10, 2011
My DVD is not recognised by windows 7 64 bit.
View 2 Replies
View Related
Jun 9, 2012
I attempted to upgrade my 64bit vista to windows 7 yesterday, and somehow managed to screw it up. After supposedly completing the upgrade my system restarted then told me the upgrade had failed and everything from my HDD was deleted. I then proceeded with a clean installation on my other HDD, everything went okay and it seemed fine until I restarted and it loaded vista again from my other HDD.I went into bios upon boot and tried to change the load order, however it would seem only one of my HDDs is recognised. Also, the vista HDD is now failing apparently (yay!) which I'm not too fussed about, I just want to get a working system again. I checked device manager to try and see whether my other HDD was recognised there and it is, however it would seem that both of my HDDs are exactly the same make/model. Presuming my vista HDD is on its way out, how can I sort my computer so that it boots from the 7 HDD.
View 9 Replies
View Related
Jul 13, 2011
I currently have Windows Home Premium 64-bit and seems to be working quite well.However, when I tried to connect my Iomega eGo external HDD to *every single USB port I have on the computer* the computer would "see" the HDD but not register as a HDD that I can access.It will not show up in My Computer at all. The HDD has music files on it from a different computer, so it's not empty.When I go to look at the USB connections, it shows up as a USB Mass Storage device, but again, I cannot actually get INTO my HDD.As a side note, when I look at computer management, my external HDD shows up as Disk1. Perhaps I need to allocate a letter to it? How can I do that without erasing the data stored on it already?
View 5 Replies
View Related
Oct 17, 2011
I need a Driver for my IOMEGA CD-RW Plus for windows 7 Ultimate 32 Bit.
View 1 Replies
View Related
Feb 13, 2013
My iomega ext. drive suddenly stopped being recognized in my win.7. Drive model is LPHD-UPc 500 MB
View 1 Replies
View Related
Sep 29, 2009
Network storage drive that had loads of stuff on died, though we backups on a another networks drive and finally managed to get it onto a new Iomega drive.
However, the software for getting to the drive is basically a gloryfied web page. It can find the drive fine, and the folders, but cannot connect to the folders. It says "A problem occurred when trying to connect to the folder "Public"".
Tried running as admin, did nothing, then tried compatibility mode which it didn't run at all in. IE doesn't help either. However, XP can run it just fine, and can find the drives fine. But 7 can't!
View 2 Replies
View Related
May 19, 2011
I have a playsation controller adaptor which will not connect properly with windows 7.I can see that this is a fairly common problem as there are quite a few threads on other forums about this particular issue. Unfortunately having read through all of them the solutions offered (and seemingly successful for adaptors of other makes) do not work for me.A little history: worked perfectly on the machine I am using before upgrading from XP to 7. I didn't have to install specific drivers as the drivers XP provided were sufficient.Symptoms: pad/Controller is not recognised in "game controller settings" (joy.cpl found in system32 folder) which on XP allowed me to configure the pad. (There is no pad showing in the window under controller) The controller does show up in the control Panel's "devices and printers" but as "HID-compliant game controller" (it also doesn't show in the device manager under "sound, video and game controllers" only in the Human interface devices tree) The pad is therefore not recognised by, amongst others, pro evolution 11.
Checks: I know the hardware I have works as I have a clever little piece of software called joytokey which substitutes buttons pressed on the pad for keys on my keyboard. Indeed I have typed this entire post using the offending pad. (I haven't really but the point is that I could have done showing that the controller is recognised to a degree and working). Why don't you just use the joytokey software to play pro evo? I hear you ask. I do, however as good as that software is it can't mimic the two joysticks on the PS2 pad which limits the functionality I have in that game. (Like going to war and only being able to use a pistol)
The most damning piece of evidence I have to prove that the hardware works fully is that I have microsoft's very own flight simulator X and without the trickery of joytokey or any type of manual configuring I am able to control the vehicles using my playstion 2 pads. (For those of you who have never played the game, everything important is controlled using the two joysticks on the ps2 pad). Just get an Xbox controller they are not that expensive, in fact in the time it has taken you to create this thread you could have earned enough for a few of them! My, you're a talkative fella. I could buy one but I really prefer the layout and feel of the PS2 pads.
So there we have it. The pad and adaptor work perfectly but only on games that don't require Windows 7 to see the pad in the game controller settings.I have tried the closest thing I could find to the manufacturers driver and one I found at another forum, [URL] neither worked properly for my particular adaptor. (Pad still did not show up in joy.cpl and also caused the pad to vibrate uncontrollably and most functionality stopped in games I tested it in)all I need is the driver windows developed for windows XP but if this is microsofts way of forcing people to buy and use one of their XBox controllers then I'll have to admit defeat.
View 7 Replies
View Related
Sep 17, 2012
my usb scandisk 4 gb pendrive not not working as soon as i connected my pend drive in usb port lite of pen drive blows constant and and error show 43.
View 1 Replies
View Related
Apr 7, 2011
I have an Iomega portable hard drive, which is compatible with windows 7, however, when running the Iomega Encryption Utility using the reconfiguration option to set a password for the hard drive, it told me you must format this drive before use, anyways, my windows 7 doesnt recognise it anywhere! yet before the encryption ran it did! in disk management it only shows my C drive, the Iomega showed up in my computer as a G drive but it doesnt now. Its like the computer cant see the hard drive! I read about formatting the disk but it wont give me that option when the device is plugged in.
View 9 Replies
View Related
Aug 21, 2011
My Iomega Home Storage NAS is suddenly not accessable. It is formatted in Linux (I believe). Can I in any way connect it via USB as an external HDD and save my files? My computer has Windows 7 64b. If I try to connect the drive via USB, I cannot see it in "My computer" but it is present in Diskmanager.
View 4 Replies
View Related
Feb 11, 2012
I am thinking about getting an 'iomega (#34836) 1TB eGo USB 2.0 External Hard Drive to replace a much smaller one from a different manufacturer. However, I have read a few reviews where some folks running Windows 7 had some problems getting it to recognize the iomega eGo External Drive. this External Drive while using Windows 7 ... either 'pro or con'?
View 2 Replies
View Related
Aug 12, 2011
my computer not faund iomega hard drive
View 1 Replies
View Related
Dec 21, 2011
the iomega_HDD(F use to be reconized and it was droped and now it is not reconized. the ubs connection is good i tried on another divice and it was reconized. The light on the imogea_HDD(F is on when plugged in but it makes a ticking sound and it is not reconized?
View 3 Replies
View Related
Jan 6, 2012
iomega hard drive not work with Windows 7 64 bit
View 1 Replies
View Related
Apr 13, 2012
My Iomega external drive stopped working. One minute it was fine and the next I could not see it anymore. Tried two different laptops and neither sees it.
View 4 Replies
View Related
