Iomega Hard Drive Not Work With Windows 7?
Jan 6, 2012iomega hard drive not work with Windows 7 64 bit
View 1 Replies
ADVERTISEMENT
Iomega Hard Drive Not Recognized By Windows 7
Jun 14, 2012I am trying to fix a iOmega harddrive for a friend and the issue that he has is that the iOmega is not being recognized by his computer. The device has power, the disk is spinning and the led is on and stays constant, no flashing or anything. I have tried to see if the device was in Device Manager but it is not. The device is not being recognized by Windows 7 at all. No beeping noises when I plug it in or anything. I have tried multiple USB ports as well as other computers. The device just isn't being recognized.
View 1 Replies View RelatedIomega Portable Hard Drive Not Recognized?
Apr 7, 2011I have an Iomega portable hard drive, which is compatible with windows 7, however, when running the Iomega Encryption Utility using the reconfiguration option to set a password for the hard drive, it told me you must format this drive before use, anyways, my windows 7 doesnt recognise it anywhere! yet before the encryption ran it did! in disk management it only shows my C drive, the Iomega showed up in my computer as a G drive but it doesnt now. Its like the computer cant see the hard drive! I read about formatting the disk but it wont give me that option when the device is plugged in.
View 9 Replies View RelatedIomega External Hard Drive Not Recognized?
Aug 12, 2011my computer not faund iomega hard drive
View 1 Replies View RelatedIomega External Hard Drive Not Recognized?
Dec 21, 2011the iomega_HDD(F use to be reconized and it was droped and now it is not reconized. the ubs connection is good i tried on another divice and it was reconized. The light on the imogea_HDD(F is on when plugged in but it makes a ticking sound and it is not reconized?
View 3 Replies View RelatedIomega External Hard Drive Not Recognized
Apr 13, 2012My Iomega external drive stopped working. One minute it was fine and the next I could not see it anymore. Tried two different laptops and neither sees it.
View 4 Replies View RelatedIomega EGo 500GB External Hard Drive Isn't Recognized
Feb 15, 2012Iomega eGo 500GB External Hard Drive isn't recognized
View 1 Replies View RelatedIomega External Hard Drive Not Showing Up In Computer But Does Appear In D?
Oct 18, 2012My Iomega external UBS drives does not show up in mycomputer by it does appear in the device manager.
View 2 Replies View RelatedIomega EGo External Drive And Windows Seven Compatibility
Feb 11, 2012I am thinking about getting an 'iomega (#34836) 1TB eGo USB 2.0 External Hard Drive to replace a much smaller one from a different manufacturer. However, I have read a few reviews where some folks running Windows 7 had some problems getting it to recognize the iomega eGo External Drive. this External Drive while using Windows 7 ... either 'pro or con'?
View 2 Replies View RelatedNew Hard Drive - Windows 7 Recovery CD Refuses To Work
Mar 29, 2012I have a HP Pavilion laptop which came with Windows 7 Home Preinstalled. On the back of the laptop is a coa product key. Recently the hard drive failed. I was told that I could easily get a new drive which I have done and I have run the system test and the new drive passes. However although I have a HP system recovery cd, i do not have any installation cd's for windows as HP don't give you any.
I've tried using the recovery cd but as the new hard drive has never had windows 7 on it, it refuses to work.
What do i do now? Why don't HP give away the software with their computers. It seems fairly logical that maybe one day in the future you might need to install a new hard drive. I'm not exactly enthused about paying for the software when I clearly have a legal key on the back of the laptop.
If I Reinstall Windows 7 On The Same Hard Drive Will The Copy Still Work ?
Jul 8, 2010I am planning on building myself a new computer and I am using the same hard drive as I am currently and I wanted to reinstall win 7 and clear my hard drive to have a new start as my hard drive is currently full of junk .So I was wondering if I reinstall win 7 on the same hard drive will the copy still work or will I have to buy a new license/serial key.
View 9 Replies View RelatedIomega Zip Or Jazz Drive
Jul 17, 2009Has anyone tried using an Iomega Zip or Jazz disk with W7?
I work in graphics and ocassionally have to pull info from one of these formats.
Looking at the Iomega site lists support for XP. . . no mention of any x64 platforms or even Vista.
I'm just trying to figure out how far to go in efforts of backwards compatability . . . at least I'm not looking to integrate a Bernoulli Drive.
IDE Hard Drive Doesn't Work
Oct 29, 2009I had Windows XP, then installed Windows 7 32bit Ultimate on IDE hard drive.
HOW CAN I FORMAT THE IDE HARD DRIVE SO AS TO DO A CLEAN INSTALL?
When putting CD in and pressing Intall. I wanted to Format my 40Gig IDE hard drive (that I use for windows intallation only). So as to start CLEAN install.
The CD recognised my hard drives. 250Gig SATA and 40Gig IDE....however would not let me format either or change in any way.....something about load driver?? VIA 6140 something.
So instead I thought to boot the disk and try that way. It didnt recognise the IDE hard drive at all. anyway I chose to do it the first way once I found that driver I mentioned.
I installed windows on woindows, then deleted the windows.old file afterwords.
An External Hard Drive Work On Both Vista And 7
Jul 24, 2012My external was always hooked up to my laptop which is running vista but when I try and view the files on my desktop (running 7) it cannot look into the hard drive and see the files. I was curious if I just bit the bullet and formatted the hard drive on windows seven would it still be compatible with my vista laptop.
View 6 Replies View Related2TB Hard Drive Won't Work On Marvell 6GB SATA Port
Jun 8, 2011Intel Core i7-960 3.20GHz LGA1366 CPU BX80601960
MB Intel BOX DX58OG
PSU Corsair 600W
MEM 4G KST KVR1333D3/4GR x3
EVGA GeForce GTX 560 Ti
Western Digital 500 GB SATA 6.0 GB-s Internal OEM Drive WD5000AAKX
Western Digital 2 TB Caviar Black SATA 6GB/s Internal OEM Drive WD2002FAEX
Just built this machine. Installed Windows 7 on the 500GB drive. Both drives are plugged into the blue SATA 6GB ports on my board. My drivers for these controllers are Marvell 91xx SATA 6G v1.2.0.1002 (Dated 3/7/2011). The second 2TB drive shows up in BIOS as well as Drive Management in Windows, but it will not be recognized as an accessible drive that can be formatted, partitioned, or anything. I get an error each time I attempt to format or partition through Drive Management. When I plug the 2TB drive into one of the other (black, Intel) SATA ports, the drive works fine, but in the blue ports it just won't seem to work. The 500GB drive, however, works perfectly as the boot disk in these ports.
Why Won't External Hard Drive Work In IDE Mode Through ESATA
Dec 18, 2011My motherboard is ASRock m3a770de. I built my machine 3 days ago. I have one Hiatchi 500gb internal HD, and one 1TB external HD.I am running Windows 7 x64 Ultimate Edition.After building my computer three days ago, I installed windows, and my external was not being detected through eSATA in the BIOS or in Windows "Probably need to install drivers" I said.So I put in the CD that came with my motherboard, and installed the AMD All in One Driver that was on it. Restarted, and hey, my external was showing up.Today, after installing SP1 (not sure if thats what did it), my ext hd was no longer showing up again. I reinstalled the driver on that CD. Now, I'm not sure if it even installed the first time, because it said it was currently uninstalled through the ATI catalyst installation program. But it didn't work this time. I'm not sure what got it to work the first time. But my eSATA drive was being read in IDE mode for three days. When trying to get it work the first time, I did plug it in via USB to see if it would work, maybe that had something to do with it working the first time?
Anyway, I changed my registry to start up in AHCI mode, and then went into my bios and changed my storage config to AHCI. Upon booting, windows would not load with my external HD turned on (anybody know why?), but loaded once I turned it off. Windows then installed AHCI drivers, and upon restarting, both hard drive, external and internal, were being detected as removal storage.Why can't I get my external HD to be read in IDE mode through eSATA? IT doesn't get read through the BIOS or Windows, even if i scan for new hardware.EDIT: sigh, now when I just went to reboot, it wouldn't load windows when my external hard drive was plugged in. Windows loaded when I unplugged it. Windows detected it when I plugged it back in.
Virus Formatted Hard Drive And Key Used Doesn't Work?
May 3, 2012My only Windows DVD was an upgrade disk I used before on the same computer a few months before. I used the command prompt on the DVD to create a NTFS partition for the OS to load onto. After that everything installed and worked fine until I tried to activate use the upgrade key, it says that it can only be for upgrading and not clean installations. I was under the impression that since I already used the key to upgrade on the computer, I would be able to use it again. Will I need to buy a new install disk or will I be able to activate the OS another way? If I do need to buy a new install disk, would it be possible for me to simply find a X16-96072 Windows 7 Home Premium iso and use the activation code that my computer came with to provide the upgrade code with?
View 9 Replies View RelatedClone Hard Drive To 64gb Flash Drive And Restore To Another Hard Drive?
Nov 14, 2012I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedUpgrading Hard Drive On A Solid State/Hard Drive System?
Oct 25, 2011So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedDriver For Iomega Hdd 30 For Windows 7?
Apr 24, 2012Driver for iomega hdd 30 for windows 7
View 1 Replies View RelatedWindows 7 Will Not Let Access Iomega External HDD?
Jul 13, 2011I currently have Windows Home Premium 64-bit and seems to be working quite well.However, when I tried to connect my Iomega eGo external HDD to *every single USB port I have on the computer* the computer would "see" the HDD but not register as a HDD that I can access.It will not show up in My Computer at all. The HDD has music files on it from a different computer, so it's not empty.When I go to look at the USB connections, it shows up as a USB Mass Storage device, but again, I cannot actually get INTO my HDD.As a side note, when I look at computer management, my external HDD shows up as Disk1. Perhaps I need to allocate a letter to it? How can I do that without erasing the data stored on it already?
View 5 Replies View RelatedDriver For My IOMEGA CD-RW Plus For Windows 7 Ultimate 32 Bit?
Oct 17, 2011I need a Driver for my IOMEGA CD-RW Plus for windows 7 Ultimate 32 Bit.
View 1 Replies View RelatedIomega Ext.harddruve Not Recognizer In Windows 7?
Feb 13, 2013My iomega ext. drive suddenly stopped being recognized in my win.7. Drive model is LPHD-UPc 500 MB
View 1 Replies View RelatedComputer Is Not Booting Hard Drive/Unresponsive Hard Drive?
Jun 16, 2011I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedMake Internal Hard Drive Into And External Hard Drive?
Mar 30, 2012I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedInternal Hard Drive Acting Like An External Hard Drive?
Mar 4, 2010Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedTransfer Files From Bad Sata Hard Drive To New Hard Drive?
Dec 24, 2011I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedSoftware To Transfer Files From One Hard Drive To Another Hard Drive?
Jan 21, 2013I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedWindows 7 In One Hard Disc And XP In Another - Will It Work?
Jul 13, 2012I have two Internal Hard disc's... one is 1TB, and another one is 500GB. I wanna know if there's any problem if I install Windows 7 in 1TB and win XP in the 500GB hard disc and put both in one PC. Could I be able to choose which one to start during boot after that, like in Linux?
View 4 Replies View RelatedInstall Vista On One Hard Drive, Win 7 On Hard Drive 2
Nov 16, 2009I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
Iomega 2Tb Is Not Accessible
Jun 24, 2012My Iomega 2Tb is not accessible, whenever i ope it it says drive not accessible , paremeter not found.
View 1 Replies View Related