New Hard Drive - Windows 7 Recovery CD Refuses To Work
Mar 29, 2012
I have a HP Pavilion laptop which came with Windows 7 Home Preinstalled. On the back of the laptop is a coa product key. Recently the hard drive failed. I was told that I could easily get a new drive which I have done and I have run the system test and the new drive passes. However although I have a HP system recovery cd, i do not have any installation cd's for windows as HP don't give you any.
I've tried using the recovery cd but as the new hard drive has never had windows 7 on it, it refuses to work.
What do i do now? Why don't HP give away the software with their computers. It seems fairly logical that maybe one day in the future you might need to install a new hard drive. I'm not exactly enthused about paying for the software when I clearly have a legal key on the back of the laptop.
View 8 Replies
ADVERTISEMENT
Nov 17, 2011
I purchased hp laptop, pavilion g6, windows 7 before five months. There were two partitions c and D. D was fixed for recovery which is damaged now. How can I recover windows 7, my sound is not working properly as well.
View 1 Replies
View Related
Jun 18, 2012
I just turned on my laptop on and it wouldnt go past the "starting windows" logo. So I restarted my computer and it gave me an option to repair start up option and once the repair finished it said it has failed to solve the issue and it pop up a Windows System Recovery which is always good if I wanted to restore it to the factory state unfortunately I have about 30 GB more or less data on this laptop that is basically my life and wanted to retrieve the data.
It also gave me an option for command prompt so i went and run "chkdsk" it got to 49% and from there it kept on listing the entries on the disk and numbers that its got errors on, I didn't quiet finished the disk check and turned my laptop off. Reason being it was 4 AM in the morning. I have been using my laptop for over 2-3 years and by use I mean it has been online almost 80% of the time more or less.
Is it hard drive failure? If so is there a way I could retrieve any data from it? I know there are software that you can boot from CD or USB to salvage what ever data is left or readable, however the data is somewhat precious to me and dont want to do further damage. I would have gone to an professional and gave it to them but I can't afford it. I'm going to change the hard drive into a different laptop to check if its truely an hard drive problem related.
View 14 Replies
View Related
Jul 11, 2012
I have an Acer Iconia W500 that came preinstalled with Windows 7 32bit Home Premium. I made recovery discs from the tablet before installing Windows 8 on it, which runs great. What I would like to do, if possible, is to use those Windows 7 restore discs and restore them to an external hard drive and be able to boot from it and run the original Windows 7 that came preinstalled. The reason I am wanting to do this, as there were some programs, drivers, and other things that I cannot download from Acer or retrieve from the restore discs, and can only access from the OS if it is actually running.
View 3 Replies
View Related
Oct 9, 2011
The hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
View 4 Replies
View Related
Aug 4, 2012
It loads fine on my tablet, it loads fine on my phone, and it loads fine on my old PC sitting right next to this one. But on this one it hangs and I eventually get this error: "Error 101 (net::ERR_CONNECTION_RESET): The connection was reset."So the things I have done so far to try and fix it are;Virus scanSpyware scanMalware scanipconfig /release /flushdns /renewCC CleanerManual change to Google's open dhcp serverMultiple router resest/PC restarts3 different web browserschecked my "hosts" file to make sure it didn't somehow get redirected in thereIf I use a proxy site it works fine, but I cannot get it to come up any other way. And the website will not allow connecting directly by IP address as I tried that also and it doesn't work even on systems that will load it properly.
View 5 Replies
View Related
Feb 3, 2011
My 160 GB Win7 drive on my laptop failed (single partition), but thankfully I had a backup that I created on a 750 GB drive using EASUS Partition Master COPY. The backup drive is FULLY BOOTABLE, I've been booting into Windows 7 from an eSata external interface with no issues. It has a partition with my backed up Win7 installation and the rest is just unallocated space.
View 1 Replies
View Related
Jan 6, 2012
iomega hard drive not work with Windows 7 64 bit
View 1 Replies
View Related
Dec 23, 2011
hp Windows 7 won't let me recover os to a smaller hard drive original 1ter to 250gig.
View 5 Replies
View Related
Jul 6, 2011
place Daemon Lite on a second hard drive I have created out, then mount the Recovery Disc to the program in the hard drive and run a "Reset to Factory Settings" recovery from that mount? I think it would work if i boot from bios to my clean HD and then use "cd "Gaemon" and run the ISO file from that dir.
View 1 Replies
View Related
Jul 8, 2010
I am planning on building myself a new computer and I am using the same hard drive as I am currently and I wanted to reinstall win 7 and clear my hard drive to have a new start as my hard drive is currently full of junk .So I was wondering if I reinstall win 7 on the same hard drive will the copy still work or will I have to buy a new license/serial key.
View 9 Replies
View Related
Sep 12, 2012
I run the system recovery with the build in recovery partition from Sony but the installation cannot be completed due to the hard disk failure. I want to replace with a new hard drive but also want to keep the original recovery partition because there is some useful software that is included. I have a external adapter to connect my hard drive through USB to my computer and have a software to recover the data in the recovery partition.
View 9 Replies
View Related
Oct 20, 2011
to create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.
View 2 Replies
View Related
Dec 10, 2011
I have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
View 14 Replies
View Related
Mar 5, 2012
My hard drive crashed on my laptop. Before It crashed, It gave me a hard drive warning of imminent failure, and gave me an option to create recovery disks. I ended up creating 11 disks from the option. I installed the new hard drive and the BIOS reads that it will boot from the internal optical drive first. When I insert the first CD and start then computer, it continues to read "Operating system not found". When I look at the CD in another computer, it reads three files and one folder. The first file is an icon file which reads "Setup", the next is a "Media" bin file, and the last is an autorun setup information file. The last is a folder that contains various other backup files. My computer did not come with any copies of windows.
View 1 Replies
View Related
Oct 12, 2011
The model is 532h. The hard drive went bad so I replaced it with a brand new hard drive that's smaller in size (120GB vs original 160GB). I first cloned the recovery partition "PQSERVICE" to the new hard drive and then install it, ran alt+F10 but it shows "no bootable device". Alt + F10 worked with the old hard drive and the recovery ran fine but because the drive is bad it gave an error at the end. With the new hard drive the alt+F10 doesn't work at all. I checked in the BIOS and it's there. I changed the partition type to active but still get the same error. I finally use the recovery disk, wiped out everything and the recovery went through till the end (it said successfully) but after reboot I still get "no bootable device" error.
View 7 Replies
View Related
May 17, 2012
I had two hdd's in my computer and decided to remove one as I did not really need it and figured it save some power, after removing secondary hard drive which was just being used as storage i received the " MBR Error 1" after about 2 hours researching, I found I could repair it from windows cd, only problem is I only have a live usb version of it and when I try to launch system recovery the operating system is not listed and I have to load drivers for the hard disk. I really do not want to wipe and reinstall windows as its only been 2 weeks since i built the system and also I have a game which is 25gb digital download installed on it but it deletes the installation files after installing it and reinstalling would mean re-installing.
I guess I have 2 questions:
1. Is there anyway to copy a liveusb onto a disk ? for example, make an iso of a usb drive and burn it to dvd?
2. What drivers would I have to load on the windows startup recovery to get it to see the operating system
Below are my system specifications:
MOBO: Asus sabertooth z77
RAM: gskill ripjaws 8gb (2 x 4gb)
CPU: Intel i5-2500k
GRAPHICS: Zotac geforce gtc 580 3gb
HDD: WD caviar blue 500gb
OS: Windows 7 ultimate SP1 64 bit
View 2 Replies
View Related
Jan 11, 2013
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies
View Related
Nov 22, 2012
My external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies
View Related
Oct 29, 2009
I had Windows XP, then installed Windows 7 32bit Ultimate on IDE hard drive.
HOW CAN I FORMAT THE IDE HARD DRIVE SO AS TO DO A CLEAN INSTALL?
When putting CD in and pressing Intall. I wanted to Format my 40Gig IDE hard drive (that I use for windows intallation only). So as to start CLEAN install.
The CD recognised my hard drives. 250Gig SATA and 40Gig IDE....however would not let me format either or change in any way.....something about load driver?? VIA 6140 something.
So instead I thought to boot the disk and try that way. It didnt recognise the IDE hard drive at all. anyway I chose to do it the first way once I found that driver I mentioned.
I installed windows on woindows, then deleted the windows.old file afterwords.
View 4 Replies
View Related
Jul 24, 2012
My external was always hooked up to my laptop which is running vista but when I try and view the files on my desktop (running 7) it cannot look into the hard drive and see the files. I was curious if I just bit the bullet and formatted the hard drive on windows seven would it still be compatible with my vista laptop.
View 6 Replies
View Related
Jun 8, 2011
Intel Core i7-960 3.20GHz LGA1366 CPU BX80601960
MB Intel BOX DX58OG
PSU Corsair 600W
MEM 4G KST KVR1333D3/4GR x3
EVGA GeForce GTX 560 Ti
Western Digital 500 GB SATA 6.0 GB-s Internal OEM Drive WD5000AAKX
Western Digital 2 TB Caviar Black SATA 6GB/s Internal OEM Drive WD2002FAEX
Just built this machine. Installed Windows 7 on the 500GB drive. Both drives are plugged into the blue SATA 6GB ports on my board. My drivers for these controllers are Marvell 91xx SATA 6G v1.2.0.1002 (Dated 3/7/2011). The second 2TB drive shows up in BIOS as well as Drive Management in Windows, but it will not be recognized as an accessible drive that can be formatted, partitioned, or anything. I get an error each time I attempt to format or partition through Drive Management. When I plug the 2TB drive into one of the other (black, Intel) SATA ports, the drive works fine, but in the blue ports it just won't seem to work. The 500GB drive, however, works perfectly as the boot disk in these ports.
View 9 Replies
View Related
Dec 18, 2011
My motherboard is ASRock m3a770de. I built my machine 3 days ago. I have one Hiatchi 500gb internal HD, and one 1TB external HD.I am running Windows 7 x64 Ultimate Edition.After building my computer three days ago, I installed windows, and my external was not being detected through eSATA in the BIOS or in Windows "Probably need to install drivers" I said.So I put in the CD that came with my motherboard, and installed the AMD All in One Driver that was on it. Restarted, and hey, my external was showing up.Today, after installing SP1 (not sure if thats what did it), my ext hd was no longer showing up again. I reinstalled the driver on that CD. Now, I'm not sure if it even installed the first time, because it said it was currently uninstalled through the ATI catalyst installation program. But it didn't work this time. I'm not sure what got it to work the first time. But my eSATA drive was being read in IDE mode for three days. When trying to get it work the first time, I did plug it in via USB to see if it would work, maybe that had something to do with it working the first time?
Anyway, I changed my registry to start up in AHCI mode, and then went into my bios and changed my storage config to AHCI. Upon booting, windows would not load with my external HD turned on (anybody know why?), but loaded once I turned it off. Windows then installed AHCI drivers, and upon restarting, both hard drive, external and internal, were being detected as removal storage.Why can't I get my external HD to be read in IDE mode through eSATA? IT doesn't get read through the BIOS or Windows, even if i scan for new hardware.EDIT: sigh, now when I just went to reboot, it wouldn't load windows when my external hard drive was plugged in. Windows loaded when I unplugged it. Windows detected it when I plugged it back in.
View 4 Replies
View Related
May 3, 2012
My only Windows DVD was an upgrade disk I used before on the same computer a few months before. I used the command prompt on the DVD to create a NTFS partition for the OS to load onto. After that everything installed and worked fine until I tried to activate use the upgrade key, it says that it can only be for upgrading and not clean installations. I was under the impression that since I already used the key to upgrade on the computer, I would be able to use it again. Will I need to buy a new install disk or will I be able to activate the OS another way? If I do need to buy a new install disk, would it be possible for me to simply find a X16-96072 Windows 7 Home Premium iso and use the activation code that my computer came with to provide the upgrade code with?
View 9 Replies
View Related
Mar 4, 2011
I am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies
View Related
May 2, 2012
however, this time, he is away and is unable to help me. So I try to do the same thing, I run start up repair, and it says problems can't be solved automatically, I clicked on details, it shows that a problem signature is CorruptFile.This time, theres no BSOD, but it kept leading me to the Start up recovery page (the one with sys restore, restore system using image etc and command prompt). I tried running safe mode, as well as safe mode with networking, last known good config, ran all the options on system recovery/system restore. It seems like the only option i have left is use the command prompt to fix the problem. I lost the windows installation CD, so some of the commands such as bootrec.exe is in vain. I don't really know what i'm doing any way when I use the command prompt. As a last resort, I'm willing to reinstall my comp, what do i do so that i can save some files? also is it possible that I download the reinstallation file since I lost the original one?
View 9 Replies
View Related
Nov 19, 2012
I have a HP pavilion DV6 windows 7 that came with back up discs and I cannot get them to work! How do I do this?
View 2 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Dec 16, 2012
I'm having trouble with my windows installation. It seems windows installation was corrupted. I get the following when I boot (this is a summary):
Windows failed to start. . .
Insert an installation disc [and repair your computer]...
File: EFIMicrosoftBootBCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
However, the big problem starts here: the recovery options in the windows installation disc don't work. It just says it's not compatible with my version of windows (even though I know it must be, since that was the disc I installed from). How can I repair my windows installation? Could I connect my corrupt hard drive to another computer and do it through there?
View 2 Replies
View Related
Mar 27, 2011
is it possible that my one recovery key will not work because i use a easeus partition software to resize my drive c and my drive d? By the way i want to reformat my computer to install a fresh copy of windows but i dont have a windows cd, how can i do it?
View 9 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
