Why Won't External Hard Drive Work In IDE Mode Through ESATA
Dec 18, 2011
My motherboard is ASRock m3a770de. I built my machine 3 days ago. I have one Hiatchi 500gb internal HD, and one 1TB external HD.I am running Windows 7 x64 Ultimate Edition.After building my computer three days ago, I installed windows, and my external was not being detected through eSATA in the BIOS or in Windows "Probably need to install drivers" I said.So I put in the CD that came with my motherboard, and installed the AMD All in One Driver that was on it. Restarted, and hey, my external was showing up.Today, after installing SP1 (not sure if thats what did it), my ext hd was no longer showing up again. I reinstalled the driver on that CD. Now, I'm not sure if it even installed the first time, because it said it was currently uninstalled through the ATI catalyst installation program. But it didn't work this time. I'm not sure what got it to work the first time. But my eSATA drive was being read in IDE mode for three days. When trying to get it work the first time, I did plug it in via USB to see if it would work, maybe that had something to do with it working the first time?
Anyway, I changed my registry to start up in AHCI mode, and then went into my bios and changed my storage config to AHCI. Upon booting, windows would not load with my external HD turned on (anybody know why?), but loaded once I turned it off. Windows then installed AHCI drivers, and upon restarting, both hard drive, external and internal, were being detected as removal storage.Why can't I get my external HD to be read in IDE mode through eSATA? IT doesn't get read through the BIOS or Windows, even if i scan for new hardware.EDIT: sigh, now when I just went to reboot, it wouldn't load windows when my external hard drive was plugged in. Windows loaded when I unplugged it. Windows detected it when I plugged it back in.
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I'm a bit kind of desperate now. I purchased a 2TB Western Digital Sata drive (WD20EARS) and an enclosure with USB2 and eSata interface (independent power supply).Everything was ok for almost 2 months till today it just suddenly stopped being detected at all.I wasn't doing anything in particular when this happened. I remember I restarted my laptop around the time this happened (I do not remember if it happened before or after this)When I attach it with the eSata cable, nothing happens. With USB, I hear the beep that "something" was attached but then again nothing. Nothing at all in Device Managre or Storage Management.
My external was always hooked up to my laptop which is running vista but when I try and view the files on my desktop (running 7) it cannot look into the hard drive and see the files. I was curious if I just bit the bullet and formatted the hard drive on windows seven would it still be compatible with my vista laptop.
I have a sata to esata adapter installed on my desktop but its not spinning up or working my hard drive. The hard drive has 3 ports
Usb to usb Usb to dc power Esata to esata
Over usb it works fine but when i use the esata and power cable the hard drive makes a constant ticking noise and isnt detected on windows. Ive double checked inside my motherboard that its plugged into my sata ll port not sata lll. It isnt detected at all by the computer even when i search for new hardware.
Had a dual-boot system (Win 7 on drive 1, XP on drive 2) installed. Got an NTLDR is missing error on the primary WD drive on which Win 7 was installed. XP wouldn't boot either because the MBR is on the primary drive. So, I had to reinstall XP and all the software on the 2nd drive and test in original and another computer. Worked fine. When plugged into the motherboard, the Win 7 eSATA drive is not recognized by either of the 2 computers in the BIOS. It won't boot and I can't even look at the drive to see the contents - it's a non-entity as far as Windows is concerned. I plugged it into a Mac with an external eSATA to USB adapter and the Mac saw the drive but said that it was unreadable and asked if I wanted to format the drive. Since I thought I might want to try to recover files, I didn't. Anyway to see the contents of this drive with Windows and recover them or does it seem to be dead from the description?
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I have a virus and trying to get my laptop to work in safe mode, to fix it. But my Laptop monitor is broken so I use an external monitor but now I can't get that to work.
I am trying to boot from an external esata hdd through an esata express card. I can set the boot priority to ata hdd2 however it will not boot from it because it does not list my hdd id next to it. HDD 1 internal does however, show the hdd id next to it and obviously has no problem booting from it.
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
I must have deleted the info that comes on the Goflex external 500mg hard drive. I used it to watch moves often. I also had it full. After a while i would get an error message asking me to format. So I did an now it can't be recognized on my gateway window 7 computer.
I have just installed a 3TB external drive for backup purposes and was testing the image restore feature. If I use the external drive on the usb 3.0 port when entering F8/System Repair/Repair from image, the drive is not detected at all, when I plug it into the 2.0 port it is detected. Within windows itself the drive operates fine on the 3.0 hub. I am guessing its some kind of USB 3.0 driver issue within system repair but wondered if there is a work around. Not sure I want to sit and wait for a restore over 2.0 when it could be using 3.0!
I plugged in my eSATA drive while CrystalDiskInfo was running and the computer froze. There was no way to regain control of the computer so I restarted.So now this eSATA drive is not recognized by the computer. The eSATA drive works in another computer.What's really weird is that another eSATA drive I have works in the computer where the crash happened.I've tried uninstalling all drivers (both hidden and visible) in Device Manager that relate to the drive.
I have Windows 7 x64 and have a hard drive attached to an eSata port on my PC. When I have not been using my PC for a few minutes the attached drive seems to go to sleep, and if I copy large folder (>20Gig) from my main (C) hard drive to my eSata drive the speed starts okay then slows to virtually nothing after 20 minutes. If I try to access the drive in explorer it takes a few seconds after I click on the drive to show the contents, this does not happen if I click on my C: drive. I have my Power settings set to High Performance and my Hard Drive "Sleep" settings set to Never.
I've got window 7 up and running all my stuff - lots of audio and video editing - the only issue is that when my WD My Book Studio Edition spins down after some time of inactivity, Windows looses the drive. I've searched through my BIOS for eSATA setting and there was no help there that I could find.
I just got an external hard drive yesterday, and have been asking a few questions on this forum. So far, people have managed to be very helpful with the previous questions, hopefully someone can do so here too.Reinstalling all my games to external hard drive, need to know if they will / how to make them appear / function properly in my GEF, whether added automatically or manually.I am basically going to have EVERYTHING put onto my 1TB external, and by everything I mean "Music, Pictures, Videos, Documents, Games, and maybe Programs". So, I made a folder for each of those things on it,and only now that I am reinstalling my games into the Programs one have I realized something.I am a bit obsessive about having a fully functioning Game Explorer Folder (GEF) with all my games visible in it. It's my assumption that when I install into an external hard drive, none of those games will be automatically added into the GEF. However, if I add them in manually (using the regedit method in the tutorial), should everything function properly, so long as I have my external hard drive on whenever I use the computer?I just need this to be confirmed before I start reinstalling more. Also, if not, please let me know if there IS a way to get them to show up in my GEF properly, or possibly move the GEF to the external hard drive or get it to recognize things from a different directory.
In order to make upgrading via a clean install easier -- and because I've been considering one for awhile anyway -- I'm looking at picking up a decent external hard drives right now... and can't seem to find a clear answer to something:
Will I see any drop off in quality of playback or computer performance if I use a drive like this (external, USB) to store all of my recorded videos. The tuner and Media center would save everything directly to this drive and play everything directly from it. Would that cause any problems at all? I notice that it requires no power adapter since it's USB powered, and it has a Interface Transfer Rate of 480 Mbps -- not sure how either of these apply to my potential use of it.
Can I boot my Windows 7 or XP PC into a USB mode where the computer can be used simply as an external USB drive? Mac has this feature and it can be very convenient for large file transfers.how do I connect two PC to swap the files. Win 7 to XP?
Ok i have a Seagate freeagent pro 500g external HDD. Was running usb but new MB has esata so i wanted to give it a go. Well not so easy as i thought.
If esata drive is hooked to port when computer loads ,Bios sees the drive but wont get past the windows load screen.
Unpluged from port and windows loads fine. So i plug it in and windows makes the normal noise but nuthing shows up. Wait 7 mins a drive apears but will always cause page to stop responding. Usb still works fine jus rather esata due to larg files
Attached an external sata hd with an esata connection. After power boot, external drive not recognized and also secondary internal sata hd not recognized.
Do I need to do something to the BIOS?Sinch stonooka has chosen the best answer to his/her question.Click here to view the answer that was selected.
My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
I just got a new Packard bell go external hard drive which I used for a couple of days with no problem. btw it has never fell or had any physical damage. I plugged it one day into the PC and it couldn 't be detected in my computer. it shows up in devices and printers and also in disk management. I read on some forums to try and initialize it but it gives me an error saying cyclic redundancy check. I 've tried everything but still not working. this is a new hard drive which has never fell and no physical damage. and please don' t tell me to return it cos it was bought in another country. the only option right now is to fix it?
Running Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.
I have a 2TB Seagate hard drive that keeps dropping out in Windows 7. I use it as my main backup drive and when writing to it using either of the two backup apps I use the drive usually "disconnects" and I have to switch it off and on again to use it.I've tried using a different USB port and a different USB cable - same thing. I have run Windows 7 error-checking checking which reports no errors.When it disconnects, device manager shows that it is still connected and working but it definitely doesn't work. For instance, I can double click and open it but it shows no folders. Switching it off and then on fixes this but only temporarily.
Whenever I try to eject a certain external hard drive using the little icon in the task window, I get a message that it is in use. I am very careful to be sure it is not in use but still get the message. This is a data storage disc. I am not aware of any programs on it that may be running in the background. Is there a way to examine a disc to see just what is being used on it at any given time?
