ESata Drive Goes To Sleep
Jul 19, 2012
I have Windows 7 x64 and have a hard drive attached to an eSata port on my PC. When I have not been using my PC for a few minutes the attached drive seems to go to sleep, and if I copy large folder (>20Gig) from my main (C) hard drive to my eSata drive the speed starts okay then slows to virtually nothing after 20 minutes. If I try to access the drive in explorer it takes a few seconds after I click on the drive to show the contents, this does not happen if I click on my C: drive. I have my Power settings set to High Performance and my Hard Drive "Sleep" settings set to Never.
View 1 Replies
ADVERTISEMENT
Jun 28, 2012
I plugged in my eSATA drive while CrystalDiskInfo was running and the computer froze. There was no way to regain control of the computer so I restarted.So now this eSATA drive is not recognized by the computer. The eSATA drive works in another computer.What's really weird is that another eSATA drive I have works in the computer where the crash happened.I've tried uninstalling all drivers (both hidden and visible) in Device Manager that relate to the drive.
View 3 Replies
View Related
Jul 19, 2009
I've got window 7 up and running all my stuff - lots of audio and video editing - the only issue is that when my WD My Book Studio Edition spins down after some time of inactivity, Windows looses the drive. I've searched through my BIOS for eSATA setting and there was no help there that I could find.
View 3 Replies
View Related
Feb 22, 2011
I have a sata to esata adapter installed on my desktop but its not spinning up or working my hard drive. The hard drive has 3 ports
Usb to usb
Usb to dc power
Esata to esata
Over usb it works fine but when i use the esata and power cable the hard drive makes a constant ticking noise and isnt detected on windows. Ive double checked inside my motherboard that its plugged into my sata ll port not sata lll. It isnt detected at all by the computer even when i search for new hardware.
View 9 Replies
View Related
Dec 30, 2009
Ok i have a Seagate freeagent pro 500g external HDD. Was running usb but new MB has esata so i wanted to give it a go. Well not so easy as i thought.
If esata drive is hooked to port when computer loads ,Bios sees the drive but wont get past the windows load screen.
Unpluged from port and windows loads fine. So i plug it in and windows makes the normal noise but nuthing shows up. Wait 7 mins a drive apears but will always cause page to stop responding. Usb still works fine jus rather esata due to larg files
View 9 Replies
View Related
Feb 26, 2011
I'm a bit kind of desperate now. I purchased a 2TB Western Digital Sata drive (WD20EARS) and an enclosure with USB2 and eSata interface (independent power supply).Everything was ok for almost 2 months till today it just suddenly stopped being detected at all.I wasn't doing anything in particular when this happened. I remember I restarted my laptop around the time this happened (I do not remember if it happened before or after this)When I attach it with the eSata cable, nothing happens. With USB, I hear the beep that "something" was attached but then again nothing. Nothing at all in Device Managre or Storage Management.
View 3 Replies
View Related
Dec 25, 2011
I bought a cable with ESATA on one end and SATA on the other end. What am I supposed to do with it? I connected a standard SATA drive to one end and the other end to the ESATA port on the back of the computer, and used an external power supply for the drive. The BIOS does not see the drive. Suspecting the drive needed to be powered from the same power supply as the computer, I plugged the drive into a normal power connector in the computer, but used the new cable to connect it to the external ESATA port. Still the BIOS sees nothing. The drive works perfectly as a SATA drive in the normal SATA connection.
View 9 Replies
View Related
Dec 18, 2011
My motherboard is ASRock m3a770de. I built my machine 3 days ago. I have one Hiatchi 500gb internal HD, and one 1TB external HD.I am running Windows 7 x64 Ultimate Edition.After building my computer three days ago, I installed windows, and my external was not being detected through eSATA in the BIOS or in Windows "Probably need to install drivers" I said.So I put in the CD that came with my motherboard, and installed the AMD All in One Driver that was on it. Restarted, and hey, my external was showing up.Today, after installing SP1 (not sure if thats what did it), my ext hd was no longer showing up again. I reinstalled the driver on that CD. Now, I'm not sure if it even installed the first time, because it said it was currently uninstalled through the ATI catalyst installation program. But it didn't work this time. I'm not sure what got it to work the first time. But my eSATA drive was being read in IDE mode for three days. When trying to get it work the first time, I did plug it in via USB to see if it would work, maybe that had something to do with it working the first time?
Anyway, I changed my registry to start up in AHCI mode, and then went into my bios and changed my storage config to AHCI. Upon booting, windows would not load with my external HD turned on (anybody know why?), but loaded once I turned it off. Windows then installed AHCI drivers, and upon restarting, both hard drive, external and internal, were being detected as removal storage.Why can't I get my external HD to be read in IDE mode through eSATA? IT doesn't get read through the BIOS or Windows, even if i scan for new hardware.EDIT: sigh, now when I just went to reboot, it wouldn't load windows when my external hard drive was plugged in. Windows loaded when I unplugged it. Windows detected it when I plugged it back in.
View 4 Replies
View Related
Jan 13, 2012
Had a dual-boot system (Win 7 on drive 1, XP on drive 2) installed. Got an NTLDR is missing error on the primary WD drive on which Win 7 was installed. XP wouldn't boot either because the MBR is on the primary drive. So, I had to reinstall XP and all the software on the 2nd drive and test in original and another computer. Worked fine. When plugged into the motherboard, the Win 7 eSATA drive is not recognized by either of the 2 computers in the BIOS. It won't boot and I can't even look at the drive to see the contents - it's a non-entity as far as Windows is concerned. I plugged it into a Mac with an external eSATA to USB adapter and the Mac saw the drive but said that it was unreadable and asked if I wanted to format the drive. Since I thought I might want to try to recover files, I didn't. Anyway to see the contents of this drive with Windows and recover them or does it seem to be dead from the description?
View 1 Replies
View Related
Jan 31, 2012
I have an eSATA drive that has stopped functioning properly. I was trying unsuccessfully to install some completely unrelated software when I noticed that my eSATA drive was presenting differently. Under My Computer it now said that the drive was empty and there were four drives that appeared that said "Removable Disk (G)", "Removable Disk (H)", "Removable Disk (I)", and "Removable Disk (J)". When I select my eSATA drive, it says 'folder empty'. When I select one of the removable disk drives it says "Please insert a disk into removable disk (?). Whenever I reboot the computer with the eSATA drive disconnected, all five disk drives go away. I don't remember changing any settings or anything like that. One thing is odd that in device manager, the eSATA drive comes up as a SCSI drive. The device manager shows it as "WDC WD10EADS-65M2B1 SCSI Disk Device", but it is actually a "WDC WD500F032".
[System Summary]
Item Value
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name HOME
[code]...
View 8 Replies
View Related
Aug 20, 2011
i just want to know what is the difference between usb and esata
View 1 Replies
View Related
Aug 2, 2009
I installed Windows 7 and the transfer of data between my
WD MyBook II (My Book Studio Edition II 2 TB Hard Drives ( WDH2Q20000 ))
is really slow.
Transferring around 30 MB/s
Is there a driver or something to correct this?
View 9 Replies
View Related
Jan 15, 2013
I'm trying to connect an internal, powered SATA HDD to the eSATA port on the back of my motherboard.To do this, I bought an eSATA to SATA cable.Unfortunately, no matter what I do, the drive is never detected, not even by the BIOS.So, I bought another cable. Same problem.Finally, I tried moving the drive and the cable to another computer. The HDD is not detected there either.So, either I am making the same mistake on both computers, or both cables are faulty..
View 6 Replies
View Related
Apr 7, 2011
I am trying to boot from an external esata hdd through an esata express card. I can set the boot priority to ata hdd2 however it will not boot from it because it does not list my hdd id next to it. HDD 1 internal does however, show the hdd id next to it and obviously has no problem booting from it.
View 7 Replies
View Related
Jan 21, 2010
new install of win7 64bit, and updates current.
have added esata port via sata port on mob; but can't locate it in device manager.
because of this, I assume that is why I can't get the eSATA cable from blacx docking station to work.
The USB cable works fine.
driver issue is only my best guess...help appreciated,and I am hoping it is simple fix.
View 4 Replies
View Related
Mar 20, 2012
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
View 2 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's. The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knows nothing about it.
The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive. The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.
View 7 Replies
View Related
Oct 13, 2010
I'm trying to get my Computer to sleep but it won't because of the Western Digital 1TB external hard drive that is connected to my network. The backup program is causing this problem, if I turn it off then it will sleep. I would like to keep it turned on because it will save any changes that are made to my folders and files. I would use the back program that comes with Windows 7, but that doesn't work. I get "Access is denied" Error code: 0x80070005. I think the problem may be from being connected to a network.
View 5 Replies
View Related
Oct 8, 2011
I set the hard drive to stop spinning after 4 hours of idle activity but it doesn't ever go to sleep. If I set the time interval to < 1 hour like 45 min then it will go to sleep.
I'm not talking about the computer going to sleep/hibernating, I mean the spinning of the hard drive.
View 5 Replies
View Related
Nov 15, 2011
I have a Plextor 716-A DVD drive in my machine that's running Windows 7 32-bit, ASUS P5Q deluxe MB and 2 x SATA HDD's.The DVD drive is not found by Windows on start-up, it does not appear in My Computer or in Computer Management - basically Windows knowns nothing about it.The DVD drive is found in the BIOS and I can see it's being loaded during boot-up. I can use the drive as a bootable drive.The drive is only discovered by Windows when I enter and then resume from sleep mode or hibernation and works fine.I've gone through every article I could find on the Web from Mr Fix it to the Upper/Lower Filters regedit.
View 4 Replies
View Related
Jan 1, 2012
What do with the the swap file on my SSD. It's a new OCZ Agility 3 with updated firmware. I also have an older Crucial SSD where I'd like to implement the same strategy.I'm debating putting my swap file on the HD to get it off the SSD but I'd like the hard drives to spin down when not in use. One box will be a media center PC that will be always on and having hard drives constantly spinning seems like overkill.If I put a swap file on the HD, will that drive ever go into sleep mode? I'm guessing no. Right now, I'm leaning towards small swap file on the SSDs say (512 to 2048). It'll also be easier to deal with if I ever decided to swap out or rearrange the HDS.
View 1 Replies
View Related
Dec 8, 2012
I purchased am HP Mini 110 netbook three weeks ago to use in school while I leave my heavier and bigger laptop at home. It came with Windows 7 Starter, but I took the (bad) decision of installing an illegitimate copy of Windows 7 Home Premium because I found starter somewhat clunky.
I downloaded the ISO from a torrent and created a bootable USB. I just run the installer from Windows itself and the installation took about 45 minutes. After that I installed the drivers and everything went fine for a week. I also used the ''activator' that came with the torrent.
This Friday, as I resumed from sleep, the system froze as I put my password for a few seconds and soon after I got a BSOD and the computer shut off. As it rebooted I got a message saying that no OS is installed and that no HD is detected. I attempted to run some diagnostic tests through the BIOS but it tells me that not HD is detected. I even attempted to install Ubuntu and it doesn't detect a drive either.
I already talked to HP costumer service and they'll soon come to pick up the netbook to get it serviced, but meanwhile, I sent it to a technician to find out what is wrong with it. The news I got from him were that the HD was completely dead.
Previously, I had unplugged the HD to make sure the ribbon was not lose and plugged it again. Now, I am in this dilemma: Would my HP warranty void if they find out I installed a pirated OS which arguably caused the hardware to fail?
View 5 Replies
View Related
Jan 29, 2013
i was wondering what the difference was between putting a computer to sleep and having a hard drive shut down (through power options).
View 3 Replies
View Related
Jan 11, 2012
My computer is running Windows 7 professional. It is a fresh install. I have a blu ray drive installed (LG BH12ls38) that works fine. However, when I put my computer to sleep and wake it back up, the drive is gone. When I go to device manager and try to scan for hardware changes it still doesn't recognize it. The only way to solve the problem is to shut down the computer. Restarting the computer doesn't work. If I restart, the computer stays on the motherboards screen for a longer period of time then it normally does (about 30 seconds). Also, it seems that this drive is affecting the computer when I shut it down. After having this problem of not being able to find the drive it seems my computer takes longer to shut down.
I have installed all necessary updates for Windows and the driver is provided by Microsoft driver version - 6.1.7601.17514 and date is 6/21/2006. I called LG and they have not been able to find a solution. It seems they do not provide/have a driver and rely on microsoft's drivers. I also updated my BIOS to the newest version. I went to my local store and tried another LG drive which was older and not blu ray and it worked fine so it's not a motherboard or power issue. My computer is running in IDE mode. The reason I state that is because I saw some posts about people switching from IDE to AHCI mode. However, I talked to the technician at my local microcenter and he said this wouldn't be the issue. Sounds to me like firmware issue?
View 6 Replies
View Related
Apr 29, 2011
If I'm running utorrent when I put my Windows 7 pc to sleep, after it wakes my external hardrive will become completely unresponsive. Usb hardrive at this point will not eject properly so I have to either unplug it unsafely or reboot PC to regain control of drive. If I remember to shut off Utorrent before I put PC to sleep, PC will wake fine with ex. hardrive working fine. I can avoid having to turn Utorrent off first before I put my PC to sleep?
View 1 Replies
View Related
Dec 7, 2012
I am having a problem with a Seagate 1 TB Backup Plus External Hard Drive connected to the USB port of my Asus Sabertooth motherboard. After waking up the system after sleep, the external drive vanishes from the PC. Web searching has shown me a fix in 2009 that was supposed to be incorporated into Windows 7. It either was never done, or it was not pertinent to my situation, since it made no reference to USBconnection. The problem described then was that due to the large size of this drive, it did not respond soon enough to the awakening process, and thus was never seen
View 6 Replies
View Related
Sep 25, 2011
Brand New Hard Drive Disappears from Windows after sleep; WD Raptor only 450GB, disappears from Windows 7 after system resumes from sleep. The drive is just a storage drive. I've got three other hard drives that work fine. Could this be a port issue on the motherboard, Asus P8P67 LE?
View 2 Replies
View Related
Nov 7, 2010
I'm wondering if anyone else has had the following issue with USB connected external drive and Windows 7 Ultimate 64-bit:
When plugged in, the external drive is recognized by the OS, is accessible and in every aspect functions normally. After a period of non-use of the computer, e.g. 8 hours, the USB device gets knocked out. Logging back to Windows, and the 1st message will be "Unrecognized USB device", and the external drive is not visible anymore.
The only way to get the device back is to disconnect its power supply, and plug it back in.
I've done the following :
1) Changed the USB power settings of the OS. USB devices are not allowed to go to sleep
2) Changed the power setting from Seagate Manager to not allow the drive to go to sleep
3) Changed USB Legacy to Enabled on BIOS
View 1 Replies
View Related
Jan 20, 2012
Is it possible to install Windows 7 to an eSATA HD then install that drive internally to another as primary OS?
View 2 Replies
View Related
Jun 21, 2012
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
View 7 Replies
View Related
Jul 30, 2009
For some reason, my 'sleep' has stopped working - either from the sleep button, or on the Start button option.
Now it just goes to the user login screen.
Has always worked perefctly until today.
Weird. Any ideas?
View 2 Replies
View Related
