BSOD After Wakeup From Sleep, Won't Detect Drive Now
Dec 8, 2012
I purchased am HP Mini 110 netbook three weeks ago to use in school while I leave my heavier and bigger laptop at home. It came with Windows 7 Starter, but I took the (bad) decision of installing an illegitimate copy of Windows 7 Home Premium because I found starter somewhat clunky.
I downloaded the ISO from a torrent and created a bootable USB. I just run the installer from Windows itself and the installation took about 45 minutes. After that I installed the drivers and everything went fine for a week. I also used the ''activator' that came with the torrent.
This Friday, as I resumed from sleep, the system froze as I put my password for a few seconds and soon after I got a BSOD and the computer shut off. As it rebooted I got a message saying that no OS is installed and that no HD is detected. I attempted to run some diagnostic tests through the BIOS but it tells me that not HD is detected. I even attempted to install Ubuntu and it doesn't detect a drive either.
I already talked to HP costumer service and they'll soon come to pick up the netbook to get it serviced, but meanwhile, I sent it to a technician to find out what is wrong with it. The news I got from him were that the HD was completely dead.
Previously, I had unplugged the HD to make sure the ribbon was not lose and plugged it again. Now, I am in this dilemma: Would my HP warranty void if they find out I installed a pirated OS which arguably caused the hardware to fail?
View 5 Replies
ADVERTISEMENT
May 11, 2011
About a month ago my pc started going to BSOD while trying to resume after being put to sleep. PC is 16 months old. I read the forums, etc and updated the ATI radeon display driver and the Realtek network driver but the problem persisted.I also rolled back the system using restore to before the problem began but no change. I then reinstalled windows 7 64bit using the OEM CD rom and installed all the MS updates - no change. Last week, it occurred to me that it might be a monitor hw issue so I swapped out the monitor with another I had. That seemed to solve it - for 4 days - now it's doing the same thing with the second monitor.
View 5 Replies
View Related
Sep 11, 2009
For the past month I have been randomly getting BSOD when my computer wakes up from sleep. My first crash was 25 days after install, and now it happens every 3-5 days. Usually just once, and I can never seem to replicate. But it happens only when the comp is waking up, never when in use. I have tried to induce it by sleep/wake repeatedly but it happens totally randomly.
I typically don't leave my computer on for prolonged periods so I can't say it wouldn't do this after being turned on for 3 days but I have yet to have a crash like that.
My system is overclocked/watercooled and had been running stable with Vista x64 since it was built in Jan 09. I installed Win 7X64 Ultimate 7100 on July 5 2009.
So, far I have tried:
Reinstalling chipset, and updating all USB pheripheral drivers.
Update video and sound drivers
Uninstalling all windows updates
Removed one 4870 and disabled crossfire
Full repair of windows (not clean install)
Overnight memtest 8 passes
Prime 95 multithread 9 hours with no failures
Last Night I tried:
Updating chipset again, bios, and raid firmware.
Disconnecting my UPS from the USB port.
I am at a loss for what is causing this. I've seen a few threads around with
ntoskrnl issues, but none that happen only on wake up. Tonight I plan to do some PSU testing.
Does anyone have any ideas about this, mini dump file is attached ?
View 6 Replies
View Related
Sep 4, 2009
I have a problem with the hybrid sleep mode.
Whenever I try to put my notebook in sleep mode everything works ok, also normally waking up the system.
But when I disconnect the power cord and restart the system, Windows tries to resume its state but suddenly stops with a black screen and a blinking cursor.
I have absolutely no problems with normal sleep and normal hibernate (shutdown -h).
For a short time hybrid sleep worked only when I put the system to sleep with the notebook FN keys, but not through the Win start menu.
Now it doesn't work at all. Maybe this was also just a coincidence.
Can anyone help me?
View 8 Replies
View Related
Nov 26, 2009
I have a problem about my laptop (Presario CQ40-416AU) when waking it up from sleep, I set a password for my login and I required the password when resuming from sleep but it shows password error everytime I tried to login.. what could be the problem?
View 9 Replies
View Related
May 7, 2009
I am using Acer Travelmate 8204WLMi laptop running the latest RC build of Windows 7. The internet connection is lost on both LAN adapter and WLAN (3945ABG) adapter when laptop is restored from a 'sleep' mode. I have disabled 'Power Management' of each adapter via the Device Manager. I have updated to the latest set of updates.
Disabling and re-enabling LAN or WLAN adapter to restore connectivity does not work (as it does in Win-XP). I have tried to 'log off' and log back in but this does not work either. I have discovered that the only way to restore connectivity is to re-boot the laptop.
It would appear that there is an issue of the Windows 7 code to correctly manage the LAN/ WLAN adapters. Has anyone else come across this problem?
View 5 Replies
View Related
May 10, 2012
i've been having some really weird freezes, sometimes its just the windows but multimedia keyboard keys / mouse still work, other times it completely freezes (cant even move the mouse.).Usually if i wait a little bit the computer goes back to normal by itself, other times i get BSOD.Im pretty sure its hardware related because i've tried formatting and got a bsod right after installing windows, i suspect the hard drive because when the computer freezes all HDD activity stops, when the computer manages to recover the hard drive activity comes back exactly at the same time the system unfreezes, sometimes if i run chkdsk there are lots and lots of errors, windows fixes them but they come back sooner or later, also, sometimes the computer doesn't detect the hard drive after a BSOD, turning the computer off and then on always "fixes" that tho.
The only reason im not 100% sure its the HDD its because all HDD utilities i've tried (incluiding western digital diagnostics software) say the disk is fine, can SMART be wrong I've also ran memtest and no errors (just one pass tho)Things seem to have gotten worse when i changed the graphic card, however i remember getting these freezes with the old one, just not as serious, prolly just a coincidence.I remember getting 3 kinds of BSOD errors: driver_power_state_failure, pagefault_in_nonpaged_area and kernel_data_inpage_error.A week ago i turned my pc on and windows was broken, startup repair thing would show up and try to repair but failed no matter how many times i tried, this never happened to me before so it must be related.
View 9 Replies
View Related
Jun 21, 2012
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
View 7 Replies
View Related
Feb 17, 2010
Windows has stopped this device because it has reported problems. (Code 43)
View 1 Replies
View Related
Aug 10, 2009
I just purchased a dv7-1261wm and installed Windows 7. But in Device Manager, it shows 5 drivers that didn't install. There are 4 listed as "Base System Device" and 1 as "Unknown Device". I've installed all the drivers from HP's site, but that didn't help.
The main issue though is the CD/DVD/Blu-Ray Rom drive doesn't detect in any burning programs. It shows as installed fine, but burning programs can't access it.
View 1 Replies
View Related
May 18, 2012
Is there a way we can detect a person has used his pen drive in our PC Windows 7 without our permission? Can a person deletes the traces also after using his pen drive?
View 9 Replies
View Related
Jun 17, 2011
my USB drive got unreadable on the time of working with drive. Now my drive is not readable.
View 1 Replies
View Related
Jul 19, 2012
I have a WDC USB floppy drive. One day day ago when i connected my floppy to PC it worked. When i connected it to other computer it not worked and then when i connected it to my PC again it's not working. When i connect floppy it says nothing. I tried to update disk drivers with Computer Management and it says that my drivers are up to date. I tried to uninstall drivers and than install it again and that's not working. BIOS and Computer Management can see the floppy drive, but Win Explorer can't see floppy. What should i do to access my floppy and my files?
View 1 Replies
View Related
Sep 24, 2011
It worked perfectly yesterday, but when I tried to author a blank DVD with DVDFlick today, it just stopped working. I have authored many, many DVDs with DVDFlick before, so I doubt that caused the problem.
I have tried to get it to read DVDs, CDs and miniCDs, but it refuses to recognize any of them. It won't even recognize the disc at boot-time. I've gone through every support website I could find. I've downloaded several Microsoft troubleshooting utilities, and they all say something to the effect of "The disc in drive D: is not detected, or is not supported".
My computer is almost new; only about six months old, so I sure hope the drive hasn't failed on me already.
Specs: Model:
Dell XPS-15 (L502x) DVD Drive:
HL-DT-ST DVD+-RW GT32N DVD Drivers:
SlySoft's AnyDVD v6.8.5.6
Microsoft v6.1.7600.16385 (win7_rtm.090713-1255)
GEAR Software v2.02.00.01
Sonic Solutions v3.00.93.0
View 3 Replies
View Related
Dec 18, 2011
I have tried to use this IOMAX USB 2.0 to SATA/IDE Adapter Kit with Power: Amazon.co.uk: Electronics to connect an old 250 gb Samsung sata hard drive to my PC.Windows won't recognise it as a hard drive/partition - the USB adapter device is recognised, and via Devices & Printers, it shows the drive, but not as a USB External Drive, (see image) so I cannot access it.
View 3 Replies
View Related
Oct 20, 2011
I got a laptop that's called a hp pavilion entertainment PC (dv67000) and it doesn't detect the hard drive nor the CD drive. I disconnected and reconnected them and reset BIOS to load default settings. And still nothing.
View 2 Replies
View Related
Dec 18, 2011
i am having problems with my dvd drives they will both read discs with data on but wont detect blank media, i have tried a number of things now, ive uninstalled them, ive removed the filters in the reg, ive searched for firmware updates and ive tried restoring my system, its not the media either, any i try is the same and they are fine in a different system, the only thing i can think of is if something happened when i changed from xp to 7 but im sure ive burned dvd whilst running 7 before, cant remember. The drives are SONY DVD RW DW-D22A and LITE-ON COMBO SOHC-4836K.
View 4 Replies
View Related
Dec 30, 2011
On my old secondary computer my setup was
Motherboard: Chaintech VNF2-350
Master 0: HDS722516VLAT80 with Windows installation
Slave 0: WD800BB-53CCB0
But then I started getting Machine Check Exceptions and my motherboard ultimately perished. So I replaced that with a Foxconn K8S755A-6ELRS. But this new motherboard won't detect the hard drive.
It will hang at the part that says "Detecting IDE drives", sometimes it will give up and display "0" where the drive is supposed to be, other times it will hang until you unplug the cable.
If it's on the same channel as the Hitachi drive with XP on it, the BIOS recognizes the other drive, but fails to boot from it. If they are on different channels, it boots the XP drive but will see no hint of the drive on the other channel., even in Disk Management or Device Manager.
I also tried connecting it to my other computer's Intel DP35DP mobo, and it was able to detect/read/write and all that, though it does have a few bad sectors.
View 4 Replies
View Related
Jul 22, 2012
Recently I change my Os from windows vista to 7. Because I can't find a way to make the original OS to become genuine.From there, my laptop can't read external hard drive but it can only read flash drives.I don't know what my laptop is missing, if it is updates or drivers.
View 8 Replies
View Related
Dec 27, 2012
I have my external drive, I am connecting to my computer but its not detecting.I have HP probook 6455b, window 7 laptop.
View 1 Replies
View Related
Nov 8, 2011
i was installing window 7 and so far i have ubuntu installed but the set up could not detect any hard drive
View 3 Replies
View Related
Dec 27, 2011
i just bought a 60GB crosair force3 ssd. i connected it as usb drive first and set it as an active partition, and formated it. then i took off my HDD and replaced it with the SSD. then windows installation did not detect my the SSD. i went to bios and i saw that the drive is being detected as a primary slave. its a sata so no jumpers needs to be changed... do you guys know of any other methods i could try to
View 6 Replies
View Related
Aug 27, 2012
It won't detect a specific USB which has some important documents on it. I've tried other USB pen drives and they work fine. With this particular USB however, whenever I insert it, the light flashes and the computer makes the usual noise when a USB is inserted in, but it does not show up on my computer at all. I've tried on someone else's windows 7 computer and it doesn't work either so I'm assuming there is something wrong with the pendrive. However when I go to disk management there IS a USB shown present
View 3 Replies
View Related
May 14, 2009
Install everything, the bios detect the hard drive (it's a new hard drive, never been use) but when installing the Windows 7 64, the hard drive list is empty.
Here my spec
Phenom II 940BE | Gigabyte 790X-UD4P | Seagate Barracuda 7200.12 500GB | XFX HD4770 512MB | OCZ StealthXStream 600W | NZXT Tempest
View 2 Replies
View Related
Feb 17, 2011
Here's my hard drive: Seagate Constellation ES ST3500514NS
I haven't been able to get Windows 7 installation to detect this drive for about two months now. I'm running on a Gigabyte GA-880GA-UD3H mobo, revision 2.1.
I recently found a list of drivers for my motherboard on Gigabyte. I also found some downloads for my hard drive.
Oh, and I can use this drive if I'm running Windows 7 on a different hard drive, but I just can't install Windows 7 on it.
View 5 Replies
View Related
Dec 20, 2009
I recently embarked on the journey of building my first custom PC. Everything was going well, until I hit a speed bump of installing Windows 7 64 bit. So like usual I boot from the CD drive, and stick Windows 7 in. When it gets to the point where I'm going to install, it is unable to find my SATA drive to install Windows 7 on.
It then asks me to "locate drivers." So it gives me an option to browse, and when it does so I put in the disk that came with my mobo, but it's unable to find any drivers. I tried downloading drivers from my motherboard's web site, sticking them on an external HD, and locating them from there, but that still didn't work.
I checked in my BIOS, and my SATA type is under Native IDE. I tried switching it to AHCI, and my HD was no longer detected in the BIOS, switched back to Native IDE and it found it again. Also, Onchip IDE Channel is set to Disabled, and Onchip SATA Control is set to Enabled, does this matter any?
I was wondering,though, is it possible that if I set the SATA type to AHCI, move the SATA cables into ports so that the drive is recognized by my BIOS, use the AHCI drivers I downloaded, Windows 7 will detect it?
View 5 Replies
View Related
May 17, 2012
Window detect my external usb drive(WD 1023) slow, removing it with safety remove too slow, copying and deleting takes too long.
View 3 Replies
View Related
Oct 17, 2012
When i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 2 Replies
View Related
Oct 17, 2012
when i connect Seagate 1 TB external harddisk to my computer ,initially the light is blinking up and then its stopped and note showingdetecting anywhere in computer(diskamanager too),is there anyway to make detect and recover my datas.?
View 1 Replies
View Related
Feb 3, 2013
I have a 8 GB Transcend flash drive. I works properly on other systems (at least one system), but when I plug it in my Laptop, it is not even detected. Other USB devices work perfectly with my laptop, the only problem is with my Flash drive AND my laptop. I have tried to re install USB Hubs etc. of the laptop, but it did not help.
View 6 Replies
View Related
May 5, 2011
I generally leave my PC on during the day but lately after an hour or so it will not wake up.I have tried varying the sleep time but it makes no difference.
View 4 Replies
View Related