It won't detect a specific USB which has some important documents on it. I've tried other USB pen drives and they work fine. With this particular USB however, whenever I insert it, the light flashes and the computer makes the usual noise when a USB is inserted in, but it does not show up on my computer at all. I've tried on someone else's windows 7 computer and it doesn't work either so I'm assuming there is something wrong with the pendrive. However when I go to disk management there IS a USB shown present
I have a strange problem with my Acer Aspire 4738 notebook running Windows 7 Basic Premium 64-bit. In short, when I click Devices and Printers, my brand new Lexar flash drive (windows 7 compatible) seems to be properly connected to its USB port, its driver installed, and everything looks OK. But when I click Computer, the flash drive does not show up.
I have already tried these two options, but neither works.
First option, Computer -> Manage -> Disk Management. When I try to change the letter drive of the flash drive, an error message pops up: �The operation failed to complete because the Disk Management console view is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer." (I have done that but it doesn't help) And when I try to format the flash drive (i thought it might help), another error message pops up: �An unexpected error has occurred. Check the System Event Log for more information on the error."
Second option, Computer -> Manage -> Disk Drives. I uninstalled the flash drive, removed the flash drive physically from the laptop, and plugged it in again in an USB port. My computer detects the flash drive, installs its driver, but then again when I go to Computer, the flash drive doesn�t show up.
Windows 7 Home Premium - fully updated. I mapped a drive Z: and disconnected it but it still appears. Nothing I have tried works. I have tried net use many times (with everything else closed down) as follows:
net use z: /delete net use \sharenameUsers net use z: \sharenameUsers /delete net use z: \sharenameUsers * /delete ( ie.I passworded the map) net use z: \sharenameUsers myactualpassword /delete
Yes I rebooted after net use. Yes I used the actual sharename not \sharenameUsers. Is my net use syntax correct for a passworded map?
Attempting to backup my HP laptop to my new Seagate Expansion 3TB plug and play external drive returns the error shown in the screenshot below. After searching Google for a solution it seems the backup utility in Windows 7 is not compatible with high capacity drives over 2.5TB. Am I understanding this correctly? How am I going to backup my laptop onto this drive?I did come across a proposed solution here but apparently this would prevent the drive from working with Windows XP. As I need to move file between the laptop and an XP machine this is not an option for me.There is approximately 126GB of data on the machine and the drive is brand new, formatted to NTFS and otherwise empty.Perhaps I need to use a third party software to backup?
while installing 7 H.P. it gets to completing installation then freezes up after computer reboots a warning message appears stating windows 7 has failed to install and resume after reboot, and then the same warning message appears.
I tried the roll back installation option and a message flashes on and off to quickly to read. and Vista will not come up to start over.
how to to install Windows 7 Home Premium on a brand new Crucial Real SSD c300 64bg drive? Is there anything special I should know or do? It will be installed on my first build.
I have Windows 7 Home Premium and I am usually the sole user and administrator on the computer. I want to create a Guest account or Standard User account with restricted access so that it cannot do the following:
(1) Access My Documents (not the standard folder but one I created)
(2) Access the internal backup drive E:
(3) Change system settings.
It all looks very complicated and I am not at all sure what to do. Is there any way to do the above with Home Premium?
Or if none of that is possible in Windows 7 Home Premium (64-bit) is there a program that allows me to prevent other users accessing specified folders/drives?
I successfully bought the upgrade version of Windows 7 Home Premium N, downloaded and extracted it and now I want to install it.
When I choose UPDATE in the intallation dialog it tells me that I cannot upgrade from Vista Home Premium to Windows 7 Home Premium ???
Every website from Windows and other people tells me that it IS possible and even the Windows 7 Update Advisor told me that I should not encounter any problems upgrading.
Has anyone of you yet encountered upgrading problems of compatible Vista/7 versions?
Or any other idea what I can do to solve the problem?!
I know that I can make a clean intall of 7, but this would be a pain..
Yesterday I was messing around on my brand-new laptop, and I was stupid enough to try a keygen to get Ultimate (I had HP). Surprising. It worked but the copy wasn't genuine obviously. So then I rebooted, pressed F8 at boot. An ran Toshibas recovery to try to get the computer to its out of box state. I got stuck at initializomg (either that or I was impaptient) so I turned off the laptop. Then when I truer to boot I got bootmgr is missing. I have an old vista Hp disk so I installed that for the time being. So my question is, how do I get it back to the original state? I do t have any important data or anything.
I have an Iogear bluetooth dongle that until a couple of weeks ago was working fine. I use it to connect to a bluetooth keyboard. I went on a trip and took the keyboard with me, where I paired it with my iPad. When I came back, the bluetooth could no longer find the keyboard, or any other bluetooth device for that matter.I've gone through all of the usual troubleshooting steps, including making sure it is set to run automatically, making sure the device drivers are updated, removing and reinstalling the device drivers, making sure the bluetooth settings are correct as far as set to find devices etc. with no luck.It does appear to be working as far as the device goes. There is a blue light on the dongle that blinks when I click to find a bluetooth device. When I put the bluetooth on the computer into discover mode, my phone is able to find the bluetooth radio, but it cannot connect with it. All of this, and the fact that it worked fine before, leads me to believe it may be a problem with my computer. I ran antivirus software, and although it found a couple of malware programs, nothing changed.
Recently ive decided that Well i should upgrade this computer. give it a bit of ..well style.But since ive upgraded to Windows 7 there has been no sound whatsoever. Ive downloaded countless driver programs which tell you what sound card you have and not one has detected it. IVE ALSO downloaded drivers for the Windows 7 version of my sound (Realtek AC97) and ran windows updates and NONE worked. ive ran the troubleshooter on the sound thing...STILL not detecting any sound card. i tried changing the audio in BIOS from auto - enabled....nothing.
I bought a notebook preinstalled Windows 7 Home Premium 64 bit, of course, licensed.But I found it incompatible with some software. So I decided to use 32 bit.I want to format the whole drive and install 32 bit version of W7HP.
The original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
I'm french and i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.Anyone know if it it possible to enter a Premium key with a Premium N DVD ?
i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.
I have sort of a special case here. I purchased my HP laptop in Thailand, and much to my chagrin it came installed with Windows 7 Home Basic. In addition, the HP store which sold me the laptop installed 4gb of RAM neglecting to tell me that the 32bit version of 7 only supported up to 3. At any rate, I am hoping to upgrade to Windows 7 Home Premium, 64 Bit edition.But while there is a glut of information online about how to upgrade from Starter, there is little to nothing about Home Basic. Do I have to buy a full copy of 7 Home Premium 64 Bit? Can I buy an Anytime Upgrade that is meant for Starter and apply it to my computer?
My home network has 4 computers(including mine) running windows 7, and all of them are connected to the same router/access point for internet connection. When I created a homegroup, and went to add the other computers, they created another homegroup and the other 3 computers are now in the same homegroup. However on my side, it detects no computers. I clicked "leave homegroup", and it detected no homegroup on the network. The other 3 computers are on the same homegroup and are able to share files and printers. I cannot join the homegroup when i click homegroup in windows explorer it only says there is no homegroup on the network and asks me to create a homegroup.
Had Windows 7 home premium for around 2 months on a brand new desktop. Never had a single problem with it untill today. Turned it on as normal, got to the log in screen where i click on the required user. As the pc is only used by me I only have 1 user availiable. I click on it like normal but this time i get a message saying 'The user profile service service failed the logon' 'user profile cannot be loaded'. It then refreshes the page and returns me back to the logon page and if i press enter the same thing just keeps repeating itself. Other option on this page are the shutdown/sleep/restart option and a little box in the bottom left corner called ease of access with various options, but none that seem relevant to the situation.
I came to my laptop about five hours ago and have not been able to do anything with it since. I had it in hibernate and as I flicked the lid up it shut itself down - I assumed for updates. Nothing happened.I turned it on, started windows normally as it hadn't shut down properly and waited for the log on screen. It hung on "Please wait" for about five minutes with the circle going round and round and round, then nothing, just the home page no user no password no log on. I turned it off and turned it on again while Google'ing for answers. Seeing as I haven't been able to log in at all a lot of the answers I haven't been able to try, so far I have tried: to boot normally and end up with the hanging screen.booting safe mode, it loads files, finishes with windowssystem32DRIVERSCLASSPNP.SYS then restarts and I'm back to square one.booting in safe mode with networking and command prompt - same as above. F8, repair, system restore, tried all points with errors:System restore failed to extract the file (C:) from the restore point. An unspecified error occurred during system restore (0x8000ffff) [code]I downloaded Windows 7 about 18 months ago from a student offer while I was at university - I was sent a CD/DVD and put it somewhere very safe, so safe I don't even know where it is!If it is any help, I also hear a ticking noise from the laptop when it gets to the start up screen just as it begins to hang, it then stops and I end up having to turn it off or it restarts itself.
hey i have windows 7 home premium 32-bit, i also have 4GB RAM but only (2.93 GB usable). i have intel chipset 4 graphics .... what i would like to know is why my computer is not using all my RAM an can i use 1GB of my RAM as Video ram for games?
I recently uprgaded my Vista x64 PC to Windows 7 x64 Home Premium. I now want to upgrade to the professional version. I have all legal copies of both. When I upgrade to the pro version, can I then use the Win 7 Home Premium upgrade (with that FPP) on another device (laptop), since the pro upgrade will have it's own FPP?
Does Windows 7 Home Premium only support 64 bit? corychuga123 has chosen the best answer to his/her question.Click here to view the answer that was selected.
My Computer properties tell me that I have 16gb installed, but it says that only 7.96gb is useable. How do I get it to use the rest? I am running Windows 7 Home Premium x64, so I should be able to max it out at 16gb.
I bought and downloaded about a year ago, Windows 7 Anytime Upgrade to install the new OS on a computer that was bought with a Vista system already installed. Now I have some problems with the computer and I'd like to perform a clean reinstallation of Windows 7.Is it possible to do so even if I only bought the Home Premium Upgrade version?Do I absolutely need the Home Premium Full version?I was thinking of downloading ISO images from the Microsoft Store and burning them to a DVD. Will that work if I only bought the Home Premium Upgrade version?
Yesterday's evening I was watching a movie on my Asus P52J lap top and then I decided it's time to sleep so I went to brush my teeth (I left the computer running) but when I came back lap top's screen was black and it said "disk read error press ctrl+alt+delete to reboot" (or something similar) when I rebooted the same screen popped up so I just pushed the power button to power off. Then I removed battery and put it back in (in the past it worked for other crashes). When I started my pc that window came up with two suggestions to run windows normally or to fix it.
I tried to start it normally but on the windows animation screen the "windows" didn't show up and it automatically started system recovery... It took forever to load it. But when I got to the system recovery tools I saw that it says "Operating system: Unknown on (Unknown) local disk" . It really startled me. I decided to go with Startup repair. At first it was scanning for errors and then it said that it was fixing them. But it keeps on fixing them for hours. I don't know what to do... I don't have the windows 7 home premium x64 original disk because I got the computer with already installed windows.
Sercurity update for Microsoft visual C++ 2010 Service Pack 1 Redustributable Package KB2565063. this wants to update each and everytime I shut down my computer, I have checked to see if it has updated successfully - yes it has. It does this each and every day. How do I stop it (that's if I should)
My pc every now and then just likes to freeze or just crash completely so I have to reboot it several times. After a long process of rebooting it still doesn't fix the problem. It's very slow for a high spec pc, I can't seem to do simple things such as working on word or PowerPoint.
