I'm a bit kind of desperate now. I purchased a 2TB Western Digital Sata drive (WD20EARS) and an enclosure with USB2 and eSata interface (independent power supply).Everything was ok for almost 2 months till today it just suddenly stopped being detected at all.I wasn't doing anything in particular when this happened. I remember I restarted my laptop around the time this happened (I do not remember if it happened before or after this)When I attach it with the eSata cable, nothing happens. With USB, I hear the beep that "something" was attached but then again nothing. Nothing at all in Device Managre or Storage Management.
I plugged in my eSATA drive while CrystalDiskInfo was running and the computer froze. There was no way to regain control of the computer so I restarted.So now this eSATA drive is not recognized by the computer. The eSATA drive works in another computer.What's really weird is that another eSATA drive I have works in the computer where the crash happened.I've tried uninstalling all drivers (both hidden and visible) in Device Manager that relate to the drive.
I have a sata to esata adapter installed on my desktop but its not spinning up or working my hard drive. The hard drive has 3 ports
Usb to usb Usb to dc power Esata to esata
Over usb it works fine but when i use the esata and power cable the hard drive makes a constant ticking noise and isnt detected on windows. Ive double checked inside my motherboard that its plugged into my sata ll port not sata lll. It isnt detected at all by the computer even when i search for new hardware.
My motherboard is ASRock m3a770de. I built my machine 3 days ago. I have one Hiatchi 500gb internal HD, and one 1TB external HD.I am running Windows 7 x64 Ultimate Edition.After building my computer three days ago, I installed windows, and my external was not being detected through eSATA in the BIOS or in Windows "Probably need to install drivers" I said.So I put in the CD that came with my motherboard, and installed the AMD All in One Driver that was on it. Restarted, and hey, my external was showing up.Today, after installing SP1 (not sure if thats what did it), my ext hd was no longer showing up again. I reinstalled the driver on that CD. Now, I'm not sure if it even installed the first time, because it said it was currently uninstalled through the ATI catalyst installation program. But it didn't work this time. I'm not sure what got it to work the first time. But my eSATA drive was being read in IDE mode for three days. When trying to get it work the first time, I did plug it in via USB to see if it would work, maybe that had something to do with it working the first time?
Anyway, I changed my registry to start up in AHCI mode, and then went into my bios and changed my storage config to AHCI. Upon booting, windows would not load with my external HD turned on (anybody know why?), but loaded once I turned it off. Windows then installed AHCI drivers, and upon restarting, both hard drive, external and internal, were being detected as removal storage.Why can't I get my external HD to be read in IDE mode through eSATA? IT doesn't get read through the BIOS or Windows, even if i scan for new hardware.EDIT: sigh, now when I just went to reboot, it wouldn't load windows when my external hard drive was plugged in. Windows loaded when I unplugged it. Windows detected it when I plugged it back in.
I'm trying to connect an internal, powered SATA HDD to the eSATA port on the back of my motherboard.To do this, I bought an eSATA to SATA cable.Unfortunately, no matter what I do, the drive is never detected, not even by the BIOS.So, I bought another cable. Same problem.Finally, I tried moving the drive and the cable to another computer. The HDD is not detected there either.So, either I am making the same mistake on both computers, or both cables are faulty..
I have an 1T external drive plugged into esata port. It used to work and now it doesn't? When I boot up bios correctly identifies the drive as a seagate sata drive. When I look at device manager is says its a seagate SCSI drive and therefore the system doesn't recognize it at all? In device manager under drive properties it say " this device is working properly" I checked in disk management.
I recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).
my 80GB WD Passport is not being detected by my laptop when plugged in (by USB). A LED at the side of the external hard drive indicates that it is being powered on even though the computer shows no sign of detection (no sound indication; nothing showing up in My Computer). External Hard Drive Specs 80GB Wd Passport, model wd1200u017-002.It is only compatible with USB 2.0.
Computer Specs Windows edition: Windows 7 Home Premium Manufacturer: Dell Model: N5110 Processor: Intel(R) Core(TM) i3-2310M CPU2.10GHz 2.10 GHz Installed memory (RAM): 6.00 GB System type: 64-bit Operating System
(note this computer has both USB 2.0 and 3.0 ports, & I tried the harddrive in both ports)
I have windows 7 32 bit on a toshiba laptop. I am posting becuase this is a strange situation. I have a goflex exteral terrabyte. The computer recognizes it, lists it in the device manager and claims that it is working properly. However, I can't access it, I can't save anything to it, or get anything from it, or even see the files on it.
Now, I have a mac and a pc, the drive said it could be used on both. So i first used it on the mac (and it works perfectly) but not on the pc. It there a share error maybe?
I am an editor and I was hoping to be able to easily move from my computer (mac) to my clients (pc).
I am trying to boot from an external esata hdd through an esata express card. I can set the boot priority to ata hdd2 however it will not boot from it because it does not list my hdd id next to it. HDD 1 internal does however, show the hdd id next to it and obviously has no problem booting from it.
I've bought a Toshiba STOR.E D10 Zwart 1,5TB so that I can use e-SATA to connect it to my laptop. I've got a HP Probook 6555b with Windows 7 64bits. When I use the USB connection (this hard disk has both USB an eSATA) all works fine, no problem at all. When I connect it with the eSATA cable I can find the external hard disc and brwose through the files that are on it. However when I try to move files from my laptop onto the hard disk (or the other way around) after about 10 seconds it slows down and stops half way copying. Next Windows Explorer is not responding.
I have a Windows 7 Laptop which i bought in January, at the same time i bought a WD 2TB external hard drive to back up all my files onto (last laptop broke and i lost everything so decided to keep everything off the laptop itself).
I have Windows 7 x64 and have a hard drive attached to an eSata port on my PC. When I have not been using my PC for a few minutes the attached drive seems to go to sleep, and if I copy large folder (>20Gig) from my main (C) hard drive to my eSata drive the speed starts okay then slows to virtually nothing after 20 minutes. If I try to access the drive in explorer it takes a few seconds after I click on the drive to show the contents, this does not happen if I click on my C: drive. I have my Power settings set to High Performance and my Hard Drive "Sleep" settings set to Never.
I've got window 7 up and running all my stuff - lots of audio and video editing - the only issue is that when my WD My Book Studio Edition spins down after some time of inactivity, Windows looses the drive. I've searched through my BIOS for eSATA setting and there was no help there that I could find.
Ok i have a Seagate freeagent pro 500g external HDD. Was running usb but new MB has esata so i wanted to give it a go. Well not so easy as i thought.
If esata drive is hooked to port when computer loads ,Bios sees the drive but wont get past the windows load screen.
Unpluged from port and windows loads fine. So i plug it in and windows makes the normal noise but nuthing shows up. Wait 7 mins a drive apears but will always cause page to stop responding. Usb still works fine jus rather esata due to larg files
I bought a cable with ESATA on one end and SATA on the other end. What am I supposed to do with it? I connected a standard SATA drive to one end and the other end to the ESATA port on the back of the computer, and used an external power supply for the drive. The BIOS does not see the drive. Suspecting the drive needed to be powered from the same power supply as the computer, I plugged the drive into a normal power connector in the computer, but used the new cable to connect it to the external ESATA port. Still the BIOS sees nothing. The drive works perfectly as a SATA drive in the normal SATA connection.
Had a dual-boot system (Win 7 on drive 1, XP on drive 2) installed. Got an NTLDR is missing error on the primary WD drive on which Win 7 was installed. XP wouldn't boot either because the MBR is on the primary drive. So, I had to reinstall XP and all the software on the 2nd drive and test in original and another computer. Worked fine. When plugged into the motherboard, the Win 7 eSATA drive is not recognized by either of the 2 computers in the BIOS. It won't boot and I can't even look at the drive to see the contents - it's a non-entity as far as Windows is concerned. I plugged it into a Mac with an external eSATA to USB adapter and the Mac saw the drive but said that it was unreadable and asked if I wanted to format the drive. Since I thought I might want to try to recover files, I didn't. Anyway to see the contents of this drive with Windows and recover them or does it seem to be dead from the description?
I have an eSATA drive that has stopped functioning properly. I was trying unsuccessfully to install some completely unrelated software when I noticed that my eSATA drive was presenting differently. Under My Computer it now said that the drive was empty and there were four drives that appeared that said "Removable Disk (G)", "Removable Disk (H)", "Removable Disk (I)", and "Removable Disk (J)". When I select my eSATA drive, it says 'folder empty'. When I select one of the removable disk drives it says "Please insert a disk into removable disk (?). Whenever I reboot the computer with the eSATA drive disconnected, all five disk drives go away. I don't remember changing any settings or anything like that. One thing is odd that in device manager, the eSATA drive comes up as a SCSI drive. The device manager shows it as "WDC WD10EADS-65M2B1 SCSI Disk Device", but it is actually a "WDC WD500F032".
[System Summary] Item Value OS Name Microsoft Windows 7 Home Premium Version 6.1.7601 Service Pack 1 Build 7601 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name HOME
This has been a problem since moving to a Windows 7 64 bit machine.
I plug a HDD into an external USB and...nothing. Not listed in the computer "tree" when I go to administrative tools/Disk management it is not listed, and in the bottom tray there is no icon to safely eject the drive, as if it isnt even there. It is spinning though so I am afraid to unplug it lest I corrupt info on the drive.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I have an Acer Aspire 5741-5979 using a graphics card of Intel (R) graphics. This is a new issue I have had recently. I used to connect an external monitor to my laptop, and it worked fine. The issue is that the laptop still detects the external monitor but the external monitor does not receive a signal when I plug it in the VGA (blue trapezoid connector) have played around with the display options an exhausting amount of times and nothing works there. I tried what worked before (extending the display) and trying to clone it. I thought it might be a driver issue and I reinstalled the driver, but this didn't seem to help either. I have used many monitors when it worked, and also tried different monitors after it stopped working to no avail
I have 2 versions of windows; 7 Home Premium and Ultimate ...both are 64 Bit.
I have a Lite-On eSAU108 Black Slim External DVD Burner which works flawlessly on my laptop running windows Ultimate 64Bit. I just built myself a new system and wanted to use my external dvd burner rather than an internal drive
When i plug the burner into my rear usb 2.0 ports on my home premium version of windows 7 i have installed on my desktop it wont even detect the eSAU108 USB burner!
My initial thought is that I have a driver issue. Im fully updated with all my hardware except the motherboard BIOS and windows 7 home premium is fully updated.
My desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
One day my main desktop stopped recognizing my external 2.5 HD (uses to 2 usb ports for power). Even in "disc management" its not recognized, but the interesting thing is, all other usb devices work perfectly even all thumb drives.
I originally thought my HD was starting to fail, but later realized it worked on my laptop and htpc. Both computers recognized the external drive w/ no problems 100% of the time.
Things Ive done since:
1.Reformat main desktops HD and reinstall windows 7 (32)
2.Reformatted external HD (did it on the laptop)
3. Tried all usb ports with same result
* In the Bios, under "usb config". The drive IS recognizable. But when windows starts up, nothing happens.
But my main desktop still wont read or recognize my external drive. Im guessing its my motherboard (Asus P5KC) or PSU thats giving me the problems? Is my external drive not getting enough power? Is there any other way to trouble shoot this?
i've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
my computer is acer aspire 3630.i have windows 7 32 bit os.my philips dvd drive is now not detected by my computer.when i was installing a game,beause of low battery,my computer shutted down.when i started it again,my dvd drive is not detected.it is not showing in the device manager and bios manager.what shall i do.
