This has been a problem since moving to a Windows 7 64 bit machine.
I plug a HDD into an external USB and...nothing. Not listed in the computer "tree" when I go to administrative tools/Disk management it is not listed, and in the bottom tray there is no icon to safely eject the drive, as if it isnt even there. It is spinning though so I am afraid to unplug it lest I corrupt info on the drive.
I can't seen to be able to utilize my HP external monitor with my Sony laptop?
View 4 Replies View RelatedI have an 1T external drive plugged into esata port. It used to work and now it doesn't? When I boot up bios correctly identifies the drive as a seagate sata drive. When I look at device manager is says its a seagate SCSI drive and therefore the system doesn't recognize it at all? In device manager under drive properties it say " this device is working properly" I checked in disk management.
View 9 Replies View RelatedWhy my external Hardisk cannot detect in any pc or laptop?
View 1 Replies View RelatedI'm a bit kind of desperate now. I purchased a 2TB Western Digital Sata drive (WD20EARS) and an enclosure with USB2 and eSata interface (independent power supply).Everything was ok for almost 2 months till today it just suddenly stopped being detected at all.I wasn't doing anything in particular when this happened. I remember I restarted my laptop around the time this happened (I do not remember if it happened before or after this)When I attach it with the eSata cable, nothing happens. With USB, I hear the beep that "something" was attached but then again nothing. Nothing at all in Device Managre or Storage Management.
View 3 Replies View RelatedI recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).
View 9 Replies View Relatedmy 80GB WD Passport is not being detected by my laptop when plugged in (by USB). A LED at the side of the external hard drive indicates that it is being powered on even though the computer shows no sign of detection (no sound indication; nothing showing up in My Computer). External Hard Drive Specs 80GB Wd Passport, model wd1200u017-002.It is only compatible with USB 2.0.
Computer Specs
Windows edition: Windows 7 Home Premium
Manufacturer: Dell
Model: N5110
Processor: Intel(R) Core(TM) i3-2310M CPU2.10GHz 2.10 GHz
Installed memory (RAM): 6.00 GB
System type: 64-bit Operating System
(note this computer has both USB 2.0 and 3.0 ports, & I tried the harddrive in both ports)
I have windows 7 32 bit on a toshiba laptop. I am posting becuase this is a strange situation. I have a goflex exteral terrabyte. The computer recognizes it, lists it in the device manager and claims that it is working properly. However, I can't access it, I can't save anything to it, or get anything from it, or even see the files on it.
Now, I have a mac and a pc, the drive said it could be used on both. So i first used it on the mac (and it works perfectly) but not on the pc. It there a share error maybe?
I am an editor and I was hoping to be able to easily move from my computer (mac) to my clients (pc).
I have an Acer Aspire 5741-5979 using a graphics card of Intel (R) graphics. This is a new issue I have had recently. I used to connect an external monitor to my laptop, and it worked fine. The issue is that the laptop still detects the external monitor but the external monitor does not receive a signal when I plug it in the VGA (blue trapezoid connector) have played around with the display options an exhausting amount of times and nothing works there. I tried what worked before (extending the display) and trying to clone it. I thought it might be a driver issue and I reinstalled the driver, but this didn't seem to help either. I have used many monitors when it worked, and also tried different monitors after it stopped working to no avail
View 3 Replies View RelatedI have 2 versions of windows; 7 Home Premium and Ultimate ...both are 64 Bit.
I have a Lite-On eSAU108 Black Slim External DVD Burner which works flawlessly on my laptop running windows Ultimate 64Bit. I just built myself a new system and wanted to use my external dvd burner rather than an internal drive
When i plug the burner into my rear usb 2.0 ports on my home premium version of windows 7 i have installed on my desktop it wont even detect the eSAU108 USB burner!
My initial thought is that I have a driver issue. Im fully updated with all my hardware except the motherboard BIOS and windows 7 home premium is fully updated.
My desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
How to get output on external speaker by using external microphone via laptop.(window 7,xp and vista)
View 1 Replies View Related.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View Relateddo not detected dvd rom in compaq laptop in windows7
View 4 Replies View Relatedi have a 320gb hdd,first it was quite well when i inserted in my laptop it is easily detected now i dont know what happen it cant be detected?
View 2 Replies View Relatedmy computer is acer aspire 3630.i have windows 7 32 bit os.my philips dvd drive is now not detected by my computer.when i was installing a game,beause of low battery,my computer shutted down.when i started it again,my dvd drive is not detected.it is not showing in the device manager and bios manager.what shall i do.
View 9 Replies View RelatedI am using Micromax 300c EVDO modem ( Datacard ) for wireless broadband connection. In one machine having Intel 915 Chipset motherboard, it is working fine. In the device manager, in the modem category, it shows correctly as " CDMA 2000 Rev A Modem ". In another machine, having Intel DG41TY motherboard, the device manager does not show modem. Only in other devices category, shows as Data services. ( in ports category both diagnostic and service ports are shown correctly)
View 4 Replies View RelatedI have a Toshiba Satelite C650 (PSC12C-00M00S) with Core i3. Previously it came with 4 GB RAM. It had previously 2GB + 2GB. What I did, I bought two 4GB RAM modules and replaced them with these two. I have Windows 7 Professional 64 Bit; But the problem is it is still showing 4GB in the System Properties. I did check the RAM slots, but they seem to be fine.
View 2 Replies View RelatedOK so this is with my sisters laptop, everything was apparently fine one day & not working the next.I've read it may be a driver issue & have re-installed the correct (I think) driver version, but this hasn't fixed the problem.
View 1 Replies View RelatedI Have a internal CDRW CED-8080B it appears as CD ROM Drive in the my Computer Section. Why is it not appearing as CDRW Drive?
It does Function Opens CD etc but when i try to burn i get an error.i did use a Windows 7 Trouble shooter and i said i could not burn with the drive i was then told that the Drive did not have Burning Capabilities.I Have Burn a CD In Win XP before i upgraded to Windows 7 i dont know why Windows 7 is not detecting it and only classes it as CDROM.
Driver Name: CDROM.SYS
So I just moved to a new school which uses ACER TRAVELMATE 6293 as their laptops. When they first gave it to me they put a brand new battery in it and they gave me the wrong charger, greeeat, but I went back and got the correct one.Now, the laptop DOES charge. When I turn it on, it displays the battery icon with the charging icon over it if that makes sense, however it has a red cross over it and if you hover over that it says "no battery is detected". So you have no idea how long it has left to charge and so on. BUT if you take out the charger, the laptop will not turn on (as if the battery is flat, but surely it cant be because it has charged for 24 hrs.)Usually, I would just go to the IT guys/girls at school but seeing as they keep stuffing up and it is school holidays, I am hoping you kind and smart people have a solution. I have tried to get any dust out of the charger port/hole thing. And have also taken out and re-inserted the battery twice. This is driving me a bit stupid as I have homework to do. So just to make things clear, the laptop works completely find when connected to the charger except for what I said before. Oh and this is happens when I am on either the home or school image. And it runs on windows 7 of course
View 7 Replies View Relatedjust purchased a Gateway P7902h Laptop on the 30th - it came with 64 bit vista and I decided to upgrade the OS to Windows 7 (64x as well).
Ever since the install the laptop has been unable to detect my graphics card, a Geforce GTX 260M. Every time I open a driver installation program (Gateway site only has the drivers for Vista 64x so I tried those, then the Windows 7 64x ones from the Nvidia website.) I get a 'could not locate any drivers that are compatible with your hardware' error.
Looking through the Device Manager under Display Adapters, it only has the Standard VGA Graphics Adapter and not the actual card itself. Can anyone help?
I'm running into this and issue and I can't peg down a cause. I recently updated my Vista HTPC to Windows 7. When booting up I can get into the OS, but the screen goes black shortly after.
I have tried two monitors: the Panasonic plasma just goes black and when I try Samsung Syncmaster LCD it looks like it's searching for digital, then analog sources.
I have an Nvidia 8400 GS card and I've tried both the 191.07 and 195.62 drivers. I've also let Windows install the drivers after uninstalling the Display Adapter in Device Manager in Safe Mode.
When I start in Safe Mode I cannot recreate the issue. I tried uninstalling/reinstalling the drivers in Safe Mode.
my usb keyboard works fine on my freind pc win7ultimate32bit, i have same os service pack 1 also installed, my usb is amkette company---better than local, Problemis that it was working grt for 5 months, but for past 3 weeks it is detected as a unknown device, it is detected sometimes as hid device and works well for 3-4 hoursbut then suddenly goes off and a popup with malfunction and unknown device appers all time, then it will never that day maybe 10 min sometime. i plug out all power cables,uninstall usb controllers tried everything on internet, some techniques work but no permanent solution. i even reinstalled windows last week no luck.It works on my freind pc., diff in my freind pc is he has intel motherboard and i have biostar a785ge everything up to date,only solution that is left is to use a ps/2 to usb convertor(i have to wait for 3 weeks).
View 8 Replies View Relatedthis gives me an Error "Failed to find a supported hardware rendering device. Ensure that your system the minimu requirements of Company of Heroes. Verify that DirectX is properly installed and that you have the latest drivers for your system." this annoys me! i know i have directX and it is v11. the minimu req of the game is DirectX9c better if you have the latest.
View 9 Replies View RelatedI got 2 DVD : One blu-ray SATA writer and another Pioneer DVD PATA writer. I replaced my motherboard. My new motherboard doesn't have any PATA port. I decided to try this: SATA Serial-ATA to 3.5 IDE PATA Converter Adapter Cable | eBay
This thing works, my DVD is detected in BIOS, UDMA mode 4. DVD is bootable with the proper media, it is also detected and works fine in WinPE booted from my Blu-ray.
The problem is with my Windows 7 installation. The DVD is not detected after I boot. I have to go to Device manager and click "Scan for hardware change", then the DVD-RW is detected and it works fine after that.
I tried many things, I uninstalled Daemon tools, VirtualBox, I tried a registry fix (lowerfilter, upperfilter), no good.
I already posted this in the general discussion forum but since then I think it has evolved from a windows 7 problem to a hardware problem. When I turn on my laptop I'm brought to a Windows Error Recovery screen from which I could choose to either launch startup repair or start windows normally. Eventually both options lead to Windows loading files and bringing me to a screen with 2 more options. One I can choose the HDD/Operating system but there is nothing to choose. I can also choose to restore my computer using a system image, but none of the options given have helped me other than identifying that the HDD was the problem. I can also load drivers which brings me to the system 32 folder in my X: drive.
View 7 Replies View RelatedYet I can get on the internet. So what does this message mean? I know what the DNS server does-resolves names and IP addresses, etc.
View 2 Replies View Relatedplayback tab "no audio device installed" after changing from XP to Windows 7.I don't know what more to write so just tell me if you need more details about my pc
View 9 Replies View RelatedI have an error message when I try to setup up live TV in my Media Center hp computer. I am moving from Vista where it worked fine to Windows 7 upgrade where now I am getting a message "IR hardware not detected" I am using an xfinity top box and I have an xfinity remote control hooked up.
View 1 Replies View Relateddvd drive not detected
View 2 Replies View Related