External Hard Drives Without Their Own Power Supply Are Not Detected
Jan 8, 2012
My desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
View 3 Replies
ADVERTISEMENT
May 23, 2012
My computer keeps shutting itself down with the following error message:
"Power surges detected during the previous power on. ASUS anti-surge was triggered to protect the system from unstable power.......(see below for photo of screen).
So I bought a UPS in the hopes of controlling the flow of power to my computer. Unfortunately that didn't work so I assumed that the power supply unit must be broken. I have replaced it and I am still getting the crash/error. So I simply disabled the feature on teh motherboard that controls anti-surge protection and now my computer simply crashes and powers down.
I have checked the event logs and noticed this being logged right before the crash every time:
"File System Filter 'aswSnx' (6.0, ‎2012‎-‎03‎-‎07T01:04:05.000000000Z) has successfully loaded and registered with Filter Manager."
dxdiag:
------------------
System Information
------------------
Time of this report: 5/23/2012, 20:17:39
Machine name: ENDUSER-PC
[Code].....
View 6 Replies
View Related
Dec 1, 2012
my computer does not starting up...so i choose to press f12 then diagnostics then it shows that no hardrive detected -warning.
View 1 Replies
View Related
Apr 14, 2011
I have an 1T external drive plugged into esata port. It used to work and now it doesn't? When I boot up bios correctly identifies the drive as a seagate sata drive. When I look at device manager is says its a seagate SCSI drive and therefore the system doesn't recognize it at all? In device manager under drive properties it say " this device is working properly" I checked in disk management.
View 9 Replies
View Related
Sep 7, 2012
Why my external Hardisk cannot detect in any pc or laptop?
View 1 Replies
View Related
Oct 6, 2011
I recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).
View 9 Replies
View Related
Jul 10, 2012
my 80GB WD Passport is not being detected by my laptop when plugged in (by USB). A LED at the side of the external hard drive indicates that it is being powered on even though the computer shows no sign of detection (no sound indication; nothing showing up in My Computer). External Hard Drive Specs 80GB Wd Passport, model wd1200u017-002.It is only compatible with USB 2.0.
Computer Specs
Windows edition: Windows 7 Home Premium
Manufacturer: Dell
Model: N5110
Processor: Intel(R) Core(TM) i3-2310M CPU2.10GHz 2.10 GHz
Installed memory (RAM): 6.00 GB
System type: 64-bit Operating System
(note this computer has both USB 2.0 and 3.0 ports, & I tried the harddrive in both ports)
View 8 Replies
View Related
Oct 24, 2012
I have windows 7 32 bit on a toshiba laptop. I am posting becuase this is a strange situation. I have a goflex exteral terrabyte. The computer recognizes it, lists it in the device manager and claims that it is working properly. However, I can't access it, I can't save anything to it, or get anything from it, or even see the files on it.
Now, I have a mac and a pc, the drive said it could be used on both. So i first used it on the mac (and it works perfectly) but not on the pc. It there a share error maybe?
I am an editor and I was hoping to be able to easily move from my computer (mac) to my clients (pc).
View 4 Replies
View Related
Jul 10, 2012
I can only run one at a time instead of two. I would like to copy my 1.5tb over to my 2tb so I have a back up.
My laptop only holds 200GB of remaining data so I can't use that hard drive or I would.
View 7 Replies
View Related
Nov 7, 2010
I have used "search" in microsoft before there was windows. From that time to 95, 98, xp, vista, but Windows 7 has me baffled. My Desktop pc died and I was well backed up but now I need to find some stuff in one of the drives. Windows support is useless. Give it more than one word and it is lost most of the time. When desktop comes up I am limited to all programs on the c drive of where to search. When I go to computer and select an external drive of course the search option disappears. I detest the standard layout as it is so different from all the other systems which were easy to use.
View 3 Replies
View Related
May 6, 2011
I am currently running Ubuntu 11.04 on my HP (DV5 1110em) laptop from an external USB 2 Buffalo ministation hard drive, I have noticed my machine is equipped with an E-SATA port. Would using an e-sata external hard drive be any faster that the usb option ?.
View 3 Replies
View Related
Jul 25, 2011
My HP netbook will not recognize my verbatium external hard drive, which is about 2 years old and which it recognized last week. Help. Do I need a driver for it? If so, where can I find one?
View 2 Replies
View Related
Feb 10, 2012
my catalyst control centre has stopped working and l can't open my external hard drives.as it says they are empty and also my pictures.could someone please tell me how l can get the catalysr control centre to work again after it made my computer crash as well
View 2 Replies
View Related
May 27, 2012
i'm looking for an external hard disk with a power off/on button ?about usb2 or 3 , i don't mind.i would like a button to power on and when i don't want to use a power off
View 6 Replies
View Related
Apr 21, 2012
usb are not recognized and no power seen at external hard drive
View 1 Replies
View Related
Dec 11, 2009
Does Windows 7 have a limit on how many USB external hard drives it will use? We have 5 WD My Book 1TB drives; 4 of them are recognized and work just fine with Windows 7 Home Premium 64 (which we recently did a clean install of to replace Vista Home Premium 64), but the 5th one doesn't show up with a drive letter (in Computer or Windows Explorer), even though it does show up in Control Panel.
The one we are having trouble with has had the latest firmware and WD SmartWare installed, and our computer has the most current Dell BIOS installed. We know the drive works, because we can plug it into our other computer which has Windows XP on it and it comes up with a drive letter just fine. Just wondering if there's a limit on how many of these you can use with Windows 7, since we had no problem with the drive until we installed the new OS.
View 8 Replies
View Related
Jan 8, 2011
I bought a 2TB external hard drive (Western Digital) earlier this year on sale and for Christmas I got another one for redundancy (a back-up in case the one I have fails). My problem is that while my computer (a Dell Desktop purchased last year) will get a bit glitchy in picking up one (sometimes it won't recognize it but this is seldom), it will never recognize both at the same time. As a result, I have to add files (pictures, music, etc) to my external hard drives one at a time. I've checked all the USB ports with other hardware, and they all work - the only thing I can think of is that this is a Windows issue. I have both external hard drives assigned to different drive paths, so it's not a matter of that.
View 4 Replies
View Related
Jan 17, 2013
A standby machine that I have is having trouble starting. When first turned on, it will attempt a start, drive lights fans etc come on then within 3 seconds, go out and repeat. This does this for about 5-6 iterations and then starts normal and will run until turned off. This system has one HDD, one DVD drive, MB graphics, so I don't think there is much of a load.
View 9 Replies
View Related
Oct 17, 2012
can you run a GTX 670 on a 650W power supply?
View 6 Replies
View Related
Oct 31, 2011
My original problem, i am sure is my power suplly, I have just upgraded to the cross hair V main board. My computer has been restarting randomly during intensive game play. it didn't do this before my upgrade. Secondly as i have said above i currently have a 500w PSU. I am thinking of upgrading to the antec High Current Gamer 750 watt. I have filled in the system specs. do you think it will run my computer perfectly. also i will be getting 16GB DDR3 1600MHz RAM and an ATI 6970 will the antec PSU be enough?
View 8 Replies
View Related
May 22, 2012
i just bought a new gpu (Nvidia Gefore Gt 440) but it reccomends more than 400 watts, i only have 240 watts. Due to this, games lag on my new gpu. Can i overclock my power supply so i dont have to buy a new one?
View 5 Replies
View Related
Nov 22, 2012
I'm having some strange problems with my PSU. My computer went black last night while I was playing GTA IV. After some research on the web, I came to a conclusion that my PSU died. I attempted the paperclip trick with no success - fans didnt do anything. I was about ready to start shopping for a new one, plugged everything back into places, when I saw a red 115V/230V switch on the back. I switched it from default 115V to 230V and tried the paperclip test again. This time the fan on the back of the case (not PSU) started spinning, and lights on the front and the green light on CD-ROM lit up. I plugged the 24 pin connector back into the motherboard, and hit the on switch (still with 230V), and the same thing happened.From what I described above, what do you think has gone wrong with my PC? And why is PSU acting the way it is?
View 9 Replies
View Related
Jan 15, 2013
Which power supply is better for gaming? CHIEFTEC 750W PSU, 85+,230V W/CABLE MNG ( CTG-750C ) Or OCZ ZT Series 750W fully Modular 80 Plus Bronze, ATX12V v2.2 Active PFC ( OCZ-ZT750W-EU )In future i might Sli/crossfire.
View 5 Replies
View Related
Apr 17, 2011
I replaced my power supply and now I get a 0x80070035 error when trying to map my network storage server. I've had this mapped for over a year, and usually just need to enter the password to re-connect after a re-boot. I've tried disabling the firewall, anti-virus, file and printer sharing, etc. I looked for the extra network entries that others have said to delete, but I don't have any.
This computer is running Windows 7 Professional 64 bit. The network storage server is running Windows 7 Professional 32 bit. From the 32 bit machine the 64 bit machine shows up, even in explorer.
From the 64 bit machine the 32 bit does not show up except under the Network and sharing center, selecting "see full map" shows both machines.
I can't see how changing a power supply could cause a problem. I tried going back to a restore point from last week in case a "windows update" caused the problem, which did not show up until the latest re-boot, but that did not help either.
View 4 Replies
View Related
Aug 11, 2011
i've got 2 extra 1TB Seagate drive:[URL]I use these to make backups of my 3 hard drives (1 x SSD, 1 hybrid, and 1 SATA). I brought this new machine back in April, and it was working fine up until then. However, after trying to install some software (which didn't wanna install in the end anyway, due to it being rubbish!), I can now no longer see these drives on my PC The weird part too - is that my Win7 laptop has exactly the same issue ... but my brothers Vista laptop, and Win7 PC see them just fine!To start with I was thinking the drive had gone faulty (as it wasn't working on both my machines), but after testing it on my brothers stuff it prooved they are both working fine The USB's I'm using to connect it to are fine (They work for USB sticks and other USB kit) ... so I'm at a bit of a loss as to what it could be? The even weirder thing - is that my brothers 500gb external drive (can't remember what make that was, but its not Seagate) works just fine!Its driving me up the wall as I can't do my daily backups (I'm a software developer, so having a current backup of my PC incase of a fatal mess up with my system is vital for me)
View 5 Replies
View Related
Mar 5, 2010
I've a dual boot configuration, XP Professional and Windows 7, where the 2 partitions/OS's are independent by use of a third-party (non-Windows) boot manager. My problem is that any external hard drive I use while booted into my Win 7 OS becomes write protected within a few minutes of installation; however, the same drive is fully usable--i.e., not write protected--if used while booted into my XP Pro OS.
I'm slowly losing my mind. I've checked the registry entry involving "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies" and it's as it should be. I've used the command prompt to check volume/disk attributes for the external drives and all of them are readonly clear. Literally, running Windows 7, within minutes of plugging in an otherwise not write protected USB external hard drive it becomes write protected. Every time.
View 14 Replies
View Related
Feb 19, 2012
I currently have 4 external hard drives connected to my computer. I have each of them set to sleep after an hour of inactivity. However, if I am using the computer, they stay asleep, until I delete something; anything. Any time I send something to the recycle bin, all four of my external hard drives wake up.
I would like for this not to happen. I already went to the Recycle Bin Properties and set each external hard drive to "Don't move files to the recycle bin. Remove files immediately when deleted" thinking that it would quit checking them for deleted files.
how to prevent these external hard drives from turning on when I delete files off of my computer. And just to be clear, I am NOT deleting files that are on the externals, they are files that are on the Computer.
View 2 Replies
View Related
Nov 13, 2012
I recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies
View Related
Nov 6, 2011
I'm having an issue with trying to mount shares on my network to a WD Live player. Everything worked fine before reinstalling the OS on my computer. I am using Windows 7 Ultimate on a Dell XPS box. I have 2 external MY book 1TB drives with movies and music. The shares on my internal drives mount correctly through SSH to the WD Live but I get this error when trying to mount from the external drives:
Code: # xmount "//192.168.0.195/Films" "Films" cifs
mount: mounting \192.168.0.195Films on /tmp/media/usb/Films failed: Cannot allocate memory
xmount: xmount //192.168.0.195/Films Films cifs user=guest,iocharset=utf8,ro FAILED WTF?!? Also, I get this info when I run the command on SSH to see my shares:
[code]....
View 3 Replies
View Related
Jul 25, 2011
I am running windows 7 64 bit, and have 4 external hard drives attached (not the best way, but until I can afford a server, the only way). I am using my computer as a media center only. When I wake my computer it can take a while (30 seconds to a minute), before I can use it, due to it starting up my external hard drives, but I have noticed a couple of times, my computer will wake without starting up my external hard drives (able to use media center within 2 seconds). Does anyone know if there is a way to get my computer to wake up without starting up the external hard drives every time?
View 7 Replies
View Related
Jul 29, 2011
My external hard drives partitions are hidden in windows 7
View 2 Replies
View Related