No Hard Drives Detected / Computer Does Not Starting Up
Dec 1, 2012my computer does not starting up...so i choose to press f12 then diagnostics then it shows that no hardrive detected -warning.
View 1 Repliesmy computer does not starting up...so i choose to press f12 then diagnostics then it shows that no hardrive detected -warning.
View 1 RepliesMy desktop does not detect and external hard drive that do not come with their own power supply. I have many externals that also plug into the wall and they are working fine; but whenever it is an external without a plug, i.e. the portable ones they are never found.
They do not show up in Computer Management, so it is not because I did not assign a letter to the drive.
I have tried various things, but I don't know what I should be testing for or looking for. These externals all work on other laptops and other desktops perfectly fine so it is not the externals. When they are plugged into my desktop, they light up normally like they should, but the desktop never detects them. I have tried these externals with the different USB cable I have on hand, but nothing seems to work. It doesn't matter which USB port I plug the device in, it still gives me no response.
I am running a i7 860 on a ASUS P7P55D Pro.
i can't see the hard drives in my computer
View 5 Replies View RelatedI just bought a new computer with Windows 7 Professional 64 bit . I added 2 hard drives from my old computer to the new one. The old computer was Windows XP 32 bit with a Raid 1 configuration. I just want the added hard drives as storage and non raid. The installation went smoothly but the new computer recognizes the 2 added hard drives as one drive. Also when I boot up, the boot screen from the old computer shows briefly with the intel raid 1 info.
View 5 Replies View Relatedi recently built my computer and it has four hard drives, a new SSD, and three HDDs all taken out from my old computers. when i open my start menu and type something in only the results from the SSD will come up, how do i fix this, also all my old HDDs still have their operating system on the i never bothered working out how get rid of them.
View 3 Replies View RelatedI recently completed my first build within the last two weeks. After tinkering with everything for a while I decided to pull my HDD out of my old Dell and use that as a backup.
I then got to thinking about how it might be useful to install Windows on each hard drive and use whichever one I want for whatever I want to do with the computer. IE: One HDD will be only for games and the other HDD will be for everything else I want to do. I've done a few searches and found conflicting results. To add to this problem I returned my Gygabyte MOBO for a different model. I know I will have to reformat my current HDD that Windows is installed on. So here is the twist.
When I get the new MOBO hooked up I want to use my old Dell HDD as my primary HDD because it is bigger. Since Microsoft thinks Windows is installed on the other HDD and different MOBO what will happen with I install it on a new HDD and new MOBO? It would be essentially the same as installing it on a different computer which is obviously not something Microsoft wants happening. How is this done?
Now, given that I get that to work can I then disconnect my primary HDD and plug in my second HDD, boot from disc and install all over again. I have no problem going back and forth disconnecting and connecting which HDD I want to use when i boot up if I cannot have them both hooked up to the MOBO, but I assume I can and will just choose which to boot from in BIOS. I do not plan on moving data between the two drives as I will use an external HDD for any data backup that I might need.
I can not select my boot up drive anymore from my two hard drives, two OS pc. Both drives are SATA drive, but one of them appears as IDE in Bios. What is going on here?
View 1 Replies View RelatedRecently my computer's hard drives started clicking, both of them. I wasn't able to copy off my files or boot up as it would constantly freeze. So in order to save my data I bought a sata to usb cable to connect to my laptop to copy off the data. When I connected it I was able to save all my data and the hard drive didn't freeze one bit...a friend of mine suggested that it wasn't the hard drive but in fact the power supply that was causing it. Could it really be that or is my HD really dying or is it something else?
View 9 Replies View RelatedI have a new computer that runs Windows7 64 bit. I have an older computer hard drive that has XP.I needed something from the old hard drive and hooked it up with the cables from the Windows 7 hard drive and it booted up and ran. I've since gone back to using the Windows 7 hard drive.How do I proceed to add that second hard drive running XP to the new computer so I can have the option of running either OS? I've read through some posts, but they all presume you are installing the OS to new clean hard drives, not have them already installed.Is it as simple as hooking the XP drive into the computer as a second drive and booting it up? Do I need to change some external setting on the hard drive to have it recognized as a slave? Will Windows 7 automatically change the boot to recognize the second OS and allow a choice at startup?
View 7 Replies View RelatedI recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies View RelatedI am running windows 7 64 bit, and have 4 external hard drives attached (not the best way, but until I can afford a server, the only way). I am using my computer as a media center only. When I wake my computer it can take a while (30 seconds to a minute), before I can use it, due to it starting up my external hard drives, but I have noticed a couple of times, my computer will wake without starting up my external hard drives (able to use media center within 2 seconds). Does anyone know if there is a way to get my computer to wake up without starting up the external hard drives every time?
View 7 Replies View RelatedI just updated to a z77 i5 3.4 and everything has installed fine except for my creative arena headset usb. It was working just fine on my other machine earlier today but now that I have a new mobo and cpu it will not install the drivers. My SSD and HDD were not reformated and I have tried uninstalling and reinstalling the drivers a few times with no change. I just get 3 rapid beeps when I plug the USB in.
View 5 Replies View RelatedI have built many computers but am having a little bit of a problem with some things and my new one. My new install went great. All programs installed without a hitch. Fast and furious is the way it went to get everything installed. Now, after a week or so I have started having a couple glitches. When I go to install a new program or update it the program just sits there for 4 or 5 minutes before doing anything and then finally starts to do its thing. The other issue is that I am trying to do a backup and image clone to get my new system backed up. The problem there is that the windows backup won't see my hard drives. I then tried Norton Ghost and the same thing happened. What is causing this?
View 13 Replies View RelatedSO i have just built my first custom PC and I know it is all installed correctly, except possibly my hard drive. So I get to the window where I am supposed to select the drive where windows 7 will be installed. No drives are detected... so this means my hard drive isnt being recognized... I just got th 6822148837 and my case is weird, im not sure if i installed it all the way. My case is the Thermaltake Level 10 GT and it has hard drive slots and some kind of connector in the slot so that it plugs in automatically. I think it may not be connected fully, like I might need to attach a cord too.
View 13 Replies View RelatedI'm using Win 7 Professional x64 rtm from MSDNAA.
When i try to create a clean install, everything goes smooth untill the Partition selection screen. I get a "no drives were detected" notice and the list is empty. It offers the Load drivers option but i dont really know where to get them.
I have Striker Extreme motherboard, and a wdc wd5000aaks SCSI hard drive (connected via SATA).
Im running Vista Ultimate x64 at the moment. If i use vista's install dvd to see if it finds hdd drive during installation, it does find them. Also if i try to use Windows 7 installer from within Vista, win 7 installer finds my hdd normally.
What should i do?
make a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View Relatedso I got a new asus P8z68-V pro motherboard. Im re-using my current 750gb SATA drive. I plugged it into the sata port, and start the computer. When it starts it says "no hard drive is detected!" I go into the bios, and on the bottom it has a disk drive, and a SATA drive. It recognizes that the sata drive is there, but when i go to start up it says no hard drive is detected. I have tried a few different sata ports and it is the exact same thing.
View 3 Replies View RelatedI've got an issue during post installation. One of my hard drive is never given a drive letter, but it does show up as a possible install drive during setup.
I always have to go into Drive Management and assign that drive a letter (and moving my DVD drive down a letter to keep the letters in order).
Under Drive Management the drive has the Properties (System, Active, Primary Partition), so I'm wondering if that is the issue.
Is there a way to change Drive Properties (if that is the case)?
my acer computer stop-ed working while been surfing net, first frozen ,switch it off by pressing power button, then comes message :reboot and select proper boot device, i checked the bios then nor hard drive western segate 1tb neather dvd been detected. i tried to hold f10 but does not work?
View 1 Replies View Relatedwhy my hardisk is not accepting format & I cannot install any windows on it
View 1 Replies View Relatedhaving an issue with a brand new HD I bought. Right now Windows 7 will not detect the HD as a drive.It shows up in the BIOS correctly, but not in My Computer. It is in a Frankenstein setup: SATA connection into the SATA port on the MB (it is enabled and showing), with power from an external HD enclosure.I don't think that would affect it though, as it is just drawing power from a different PS.i did some digging and found it in the System Information under 'discs' instead of 'drives' like my original HD.[URL]...
View 2 Replies View Relatedfor some reason my internal hard drive after installing it and reinstalling windows 7 it does not show up for some reason... I have check the cords to make sure they are in correctly
My Boot menu says it's there but my OS does not see it?
I have a sata to esata adapter installed on my desktop but its not spinning up or working my hard drive. The hard drive has 3 ports
Usb to usb
Usb to dc power
Esata to esata
Over usb it works fine but when i use the esata and power cable the hard drive makes a constant ticking noise and isnt detected on windows. Ive double checked inside my motherboard that its plugged into my sata ll port not sata lll. It isnt detected at all by the computer even when i search for new hardware.
I have an 1T external drive plugged into esata port. It used to work and now it doesn't? When I boot up bios correctly identifies the drive as a seagate sata drive. When I look at device manager is says its a seagate SCSI drive and therefore the system doesn't recognize it at all? In device manager under drive properties it say " this device is working properly" I checked in disk management.
View 9 Replies View Related150gb eagle usb drive is not getting detected on my desktop or my laptop , i even tried a friends pc didnt work..
what happened was when i was moving files from my portable hdd to my desktop one of the files (8.5gb) was unable to move.. so i skipped it. anyways i was seeing that 10 mins later that the copying "bar" was not moving at all therefore i pressed cancel to stop the operation. seeing after 15mins later it was just frozen i opened task manager and ended it. then plugged it out. no it just doesn't seem to show up at all. I only see the light on the hdd.
I am trying to install windows 7 for a friend but the hard drive isn't detected within windows setup or within the bios. I have tried installing SATA drivers to try and get windows to recognise the hard drive but to no avail. Is there anything else I can try before assuming that the hard drive may be faulty?
View 2 Replies View RelatedMy hard drive, a WD Scorpio 200GB, is not being detected in bios. AHCI mode is enabled. When I go into the Advanced BIOS Features, all the master and slave configs are none; however, my SSD is recognized as I am on my computer right now using it. I tried every SATA Port, EVEN THE SATA PORT MY SSD IS INSTALLED ON, and it doesn't work; I tried 2 different cables and still no recognition; I tried 4 different hard drives and still no recognition, so it is not a problem with my motherboard, hard drives, or cables. What should I do? I have been trying to figure this out for 4 hours.
View 7 Replies View RelatedWhy my external Hardisk cannot detect in any pc or laptop?
View 1 Replies View RelatedI have a format activity on my laptop. Before formatting, I had two partitions. Now after formatting I am able to locate the other partition via disk management service. but it is not showing under my computer. What should I do?
View 1 Replies View RelatedWhen i connect a sata hard disk which is loaded with windows 7 as a secondary to another windows 7 system to take the data backup it is not showing the drives but i can see it in the device management in windows 7.
View 14 Replies View RelatedI recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).
View 9 Replies View Related