My 160 GB Win7 drive on my laptop failed (single partition), but thankfully I had a backup that I created on a 750 GB drive using EASUS Partition Master COPY. The backup drive is FULLY BOOTABLE, I've been booting into Windows 7 from an eSata external interface with no issues. It has a partition with my backed up Win7 installation and the rest is just unallocated space.
View 1 RepliesSo I did a disaster recovery with Genie Backup Manager and now Windows will not boot.I get the following bugcheck error: 0xc000021a. The message was something like: "failed to verify a Knowndll".Sfc may be able to fix the issue, but I can't use it because "a repair is pending".I can't find any crash dumps either, even though I get a BSOD.I'm using Windows 7 Ultimate x64. I can get more exact error messages later if needed.-- EDIT --The exact error on the BSOD is:"STOP: c000021a {Fatal System Error}The verification of a KnownDLL failed.System process terminated unexpectedly witha status value of 0xc0000020 (0x009f8860 0x00000000).
View 1 Replies View Relatedhp Windows 7 won't let me recover os to a smaller hard drive original 1ter to 250gig.
View 5 Replies View Relatedplace Daemon Lite on a second hard drive I have created out, then mount the Recovery Disc to the program in the hard drive and run a "Reset to Factory Settings" recovery from that mount? I think it would work if i boot from bios to my clean HD and then use "cd "Gaemon" and run the ISO file from that dir.
View 1 Replies View RelatedI run the system recovery with the build in recovery partition from Sony but the installation cannot be completed due to the hard disk failure. I want to replace with a new hard drive but also want to keep the original recovery partition because there is some useful software that is included. I have a external adapter to connect my hard drive through USB to my computer and have a software to recover the data in the recovery partition.
View 9 Replies View Relatedto create a recovery media on WD external HDD of Windows 7 from the recovery partition on my sony vaio VPCEH25EN laptop. i'm unable to do so from VAIO CARE since it only asks for an optical drive or USB flash drive, so it's not detecting it as a usb flash drive.
View 2 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedI just turned on my laptop on and it wouldnt go past the "starting windows" logo. So I restarted my computer and it gave me an option to repair start up option and once the repair finished it said it has failed to solve the issue and it pop up a Windows System Recovery which is always good if I wanted to restore it to the factory state unfortunately I have about 30 GB more or less data on this laptop that is basically my life and wanted to retrieve the data.
It also gave me an option for command prompt so i went and run "chkdsk" it got to 49% and from there it kept on listing the entries on the disk and numbers that its got errors on, I didn't quiet finished the disk check and turned my laptop off. Reason being it was 4 AM in the morning. I have been using my laptop for over 2-3 years and by use I mean it has been online almost 80% of the time more or less.
Is it hard drive failure? If so is there a way I could retrieve any data from it? I know there are software that you can boot from CD or USB to salvage what ever data is left or readable, however the data is somewhat precious to me and dont want to do further damage. I would have gone to an professional and gave it to them but I can't afford it. I'm going to change the hard drive into a different laptop to check if its truely an hard drive problem related.
I have a Gateway computer that came preloaded with Windows 7.
I am replacing the internal hard drive and I am attempting to install the factory system recovery image from the system recovery disc that I made when I bought the computer. After installing the drive and booting up from the recovery disc, I go into full factory recovery but when I go in to the option to "restore to factory default" the option is grayed out. Do I need to format the drive first? How do I do this outside of windows?
My hard drive crashed on my laptop. Before It crashed, It gave me a hard drive warning of imminent failure, and gave me an option to create recovery disks. I ended up creating 11 disks from the option. I installed the new hard drive and the BIOS reads that it will boot from the internal optical drive first. When I insert the first CD and start then computer, it continues to read "Operating system not found". When I look at the CD in another computer, it reads three files and one folder. The first file is an icon file which reads "Setup", the next is a "Media" bin file, and the last is an autorun setup information file. The last is a folder that contains various other backup files. My computer did not come with any copies of windows.
View 1 Replies View RelatedI have a HP Pavilion laptop which came with Windows 7 Home Preinstalled. On the back of the laptop is a coa product key. Recently the hard drive failed. I was told that I could easily get a new drive which I have done and I have run the system test and the new drive passes. However although I have a HP system recovery cd, i do not have any installation cd's for windows as HP don't give you any.
I've tried using the recovery cd but as the new hard drive has never had windows 7 on it, it refuses to work.
What do i do now? Why don't HP give away the software with their computers. It seems fairly logical that maybe one day in the future you might need to install a new hard drive. I'm not exactly enthused about paying for the software when I clearly have a legal key on the back of the laptop.
The model is 532h. The hard drive went bad so I replaced it with a brand new hard drive that's smaller in size (120GB vs original 160GB). I first cloned the recovery partition "PQSERVICE" to the new hard drive and then install it, ran alt+F10 but it shows "no bootable device". Alt + F10 worked with the old hard drive and the recovery ran fine but because the drive is bad it gave an error at the end. With the new hard drive the alt+F10 doesn't work at all. I checked in the BIOS and it's there. I changed the partition type to active but still get the same error. I finally use the recovery disk, wiped out everything and the recovery went through till the end (it said successfully) but after reboot I still get "no bootable device" error.
View 7 Replies View RelatedI had two hdd's in my computer and decided to remove one as I did not really need it and figured it save some power, after removing secondary hard drive which was just being used as storage i received the " MBR Error 1" after about 2 hours researching, I found I could repair it from windows cd, only problem is I only have a live usb version of it and when I try to launch system recovery the operating system is not listed and I have to load drivers for the hard disk. I really do not want to wipe and reinstall windows as its only been 2 weeks since i built the system and also I have a game which is 25gb digital download installed on it but it deletes the installation files after installing it and reinstalling would mean re-installing.
I guess I have 2 questions:
1. Is there anyway to copy a liveusb onto a disk ? for example, make an iso of a usb drive and burn it to dvd?
2. What drivers would I have to load on the windows startup recovery to get it to see the operating system
Below are my system specifications:
MOBO: Asus sabertooth z77
RAM: gskill ripjaws 8gb (2 x 4gb)
CPU: Intel i5-2500k
GRAPHICS: Zotac geforce gtc 580 3gb
HDD: WD caviar blue 500gb
OS: Windows 7 ultimate SP1 64 bit
I have just replaced the hard drive on my laptop as the original was starting to fail. I created an image of the windows 7 pro 32bit original drive. I replaced the hard drive and installed a clean 64 bit version of windows. I have also installed a clean 32 bit version as a dual boot. I now want to use the original image of the 32 bit system and install this on the clean 32 bit installation.I have tried this using the image software I have (snapshot) but cannot get it to work.
View 2 Replies View RelatedI have an Acer Iconia W500 that came preinstalled with Windows 7 32bit Home Premium. I made recovery discs from the tablet before installing Windows 8 on it, which runs great. What I would like to do, if possible, is to use those Windows 7 restore discs and restore them to an external hard drive and be able to boot from it and run the original Windows 7 that came preinstalled. The reason I am wanting to do this, as there were some programs, drivers, and other things that I cannot download from Acer or retrieve from the restore discs, and can only access from the OS if it is actually running.
View 3 Replies View RelatedMy external hard disk has been acting up i.e it would take time to load some documents. So I decided to perform the Check disk options. This has been going on for the last 3 days and am thinking of cancelling the process because it seems to be stuck and it is not even 20% done. What will be the consequences of cancelling it?
View 1 Replies View RelatedThe hard drive on my netbook is unreadable, so I cannot access the recover partition. I bought a new hard drive. Can I download windows 7 starter from the manufacturer website? My netbook is a dell inspiron mini.
View 4 Replies View RelatedI am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies View RelatedSo, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedMe and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies View RelatedI have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies View RelatedI have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
View 2 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.
My laptop is Acer with Windows 7 home premium 64 bit OS. It contain only 1 single partition disk that is c drive only.Recently, i accidentally convert the c drive which contain OS into dynamic disk.After i restart the laptop, it shows the following: BootMgr is missing Please press Alt, Ctrl +del to restart Now, i not able to enter the window. I am so worry because my important data is kept inside the hard disk, and i still not yet do any back up copy on it.I searching on this forum and learnt that i need a window 7 installation disk to repair it, but my problem is the computer dealer not give me any windows 7 installation disk when i baught this laptop as their said all the driver and windows program already kept in side the harddisk.I tried to remove the laptop hardisk which is a 500GB toshiba SATA hardisk. Then, i use the other laptop with Windows XP professional with the intention to copy yhe file inside the toshiba hard disk.However, after plugged in the hard disk to the other laptop, under the disk management, it shows that the toshiba disk as : dynamic disk, unreadable.i having problem to backup the data inside the toshiba hard disk.....
View 8 Replies View RelatedI've been noticing after re-installing Win 7 that I get random floppy drive seeks and the hard drive light flashes like crazy and then everything is fine again.I have Clamwin AV,Spyware Blaster and Spybot S&D installed,but that's it,no Windows Defender or Essentials AV.Any ideas what causes this? It's a minor annoyance,but I just want to make sure it's not damaging anything.Also would Readyboost help me? I've got 2 gigs dual channel PC3200 ram(or I could go with 2.5 gig single channel PC2700)and a P4 at 3 gig until I can afford to upgrade my comp.This is my first post in quite awhile so I hope this is in the right place
View 7 Replies View RelatedI installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.
I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.
There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.
Low disk space, Can transfer data on D drive to an external hard drive
View 5 Replies View Related