Installation Package Could Not Be Found
Jun 1, 2012
I am getting this <<This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package>> Yesterday I clean uninstalled my photo editing programs, Photplus X4 and PanoramaPlus, which are similar to Adobe Elements. The reason was that certain pics would not display, although displayed elsewhere.This morning my attempts to reinstall from the manufacturer's DVD Rom were unsuccessful with the above error.
View 7 Replies
ADVERTISEMENT
Dec 15, 2011
I am running windows 7 sp1 and downloaded the german language service pack.but i can t install it and at the end of the progress it fails, with out mentioning the reason or giving an error.I didn t do that from windows update because i wanted to have the installation file for the future, after reinstalling windows.By the way, i have enough free space on windows drive, have downloaded the same 32- bit as the system, and the installation file doesn t seen to be corrupted.I also try to install it, instead of double-clicking- by going to region and language sections and install from there, but in browse window i can t give the installion file to it and it says that : no valid installation package is founded in this folder.
View 2 Replies
View Related
Sep 20, 2011
when i install Ms office 2007 professional in window-7 starter it give error "the language of installation package is not support by your system".what i do for installation
View 1 Replies
View Related
Aug 3, 2012
The language of installation package is not supported by your system.
View 2 Replies
View Related
Jul 6, 2010
I am having trouble installing Windows XP Mode on a Dell E4300 laptop with Windows 7 Pro 32-bit. For the record, I have installed XPM on multiple occasions without any issues at all, until now. Upon launching the XP Mode installer, it starts to deploy the temporary files but hangs at expanding 'sourcesxpm'. Then I get the following error: 'This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package'.
If I try multiple times, I am sometimes able to get beyond that point where the XP Mode setup screen shows up, but then I receive an error during the installation process that says: 'Source file not found: D:xxxxxxxxxxxxxxsourcesXPM. Verify that the file exists and that you can access it'. I've checked everything I could with no avail permissions, Hardware Virtualization. I also installed it on an identical machine with the same setup. Then I got a hunch that the Windows Installer might have been corrupted. So I ran the command to un-install it (msiexec /uninstall) & got the same error message as above.
View 1 Replies
View Related
Oct 30, 2012
when i install Ms office 2010 professional in window-7 it give error "the language of installation package is not support by your system
View 2 Replies
View Related
Jan 6, 2010
after I first installed Windows 7 to my computer, I was left with only the ability to connect to the internet via Ethernet cable. I've been looking online for wireless adapters or other means to fix this problem, but to no avail.
View 9 Replies
View Related
Jun 19, 2012
how can i get windows 7 to install it keeps saying no driver found.
View 1 Replies
View Related
Sep 26, 2012
No partition appear when i install win 7 in my system.
View 1 Replies
View Related
Dec 7, 2009
I bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
View 9 Replies
View Related
Jul 10, 2011
Tolerance here, new to the forums as some of you may notice. Anyways I'm trying to install Windows 7 ultimate package on a PC that previously had Windows Vista. I've already ran the Windows Adviser program, and my PC seems fine so i went ahead and tried to install. First i tried using a burned ISO file to a DVD, with this i made my primary boot device the DVD drive, and my setup started normally. But after i selected the language, then a custom installation, and was directed to select the driver in which Windows 7 would be installed on i would get an error that reads, No device drivers were found. Make sure the installation media contains the correct drivers then click OK."
I've browsed these forums looking for someone with similar problems, and i did find them, and a lot of the threads were really annoying seeing as how so many people decided to reply with long irrelevant comments. Based on the answers from those threads I've tried burning the ISO file with a different burner (which was suggested often), but still with no prevail. So i was wondering if there was a problem with my system, or maybe my C: drive.
View 8 Replies
View Related
Jul 2, 2012
I completely formatted my computer to Windows 7 Ultimate 64 bit from Windows 7 Home Edition x64, I put in the correct product key and then when I attempted to connect to the internet I couldn't because I don't have the correct drivers.Back when I used to use Windows XP I put a little CD in and then installed the drivers from Device Manager but now with Windows 7, I put the CD in and I can't install the drivers. They show up with a tiny symbol with a yellow exclamation mark on it (it was like this too back when I used XP, but I had no problems then,).
The uninstalled drivers are these:
Base System Device
Base System Device
Ethernet Controller
Network Controller
SM Bus Controller
Also, if this helps my laptop is an Acer Laptop.
Windows 7 Home Premium
AMD A-Series Quad-Core Processor A6-3400M - 4MB cache, 1.4GHz
15.6" HD 1366 x 768 pixel resolution - 6GB DDR3 SDRAM
500GB hard drive
integrated Super-Multi drive
5-in-1 card reader
AMD Radeon HD 6520G Graphics
802.11b/g/n WLAN
Gigabit LAN
View 1 Replies
View Related
Dec 22, 2010
My system crashed and i get the blue dead screen. Now i want to install windows 7 (legal) from usb. When i get to the 'where do you want to install windows?' it gives me the following message: No drives were found. Click Load Driver to provide a mass storage driver for installation.I tried to go to my bios and change some things i read from other treads, but it didn't work out for me. I just don't know where in the bios i can change things, maybe my bios is different than others.This is my laptop: MSI GX700 Intel Core 2 Duo T7500-processor @ 2,2 GHz This is what my BIOS tells me:
MAIN
Market name: GX700
Model Name: MS-1719x
Primary IDE Master [hard disk]
Secondary IDE Master [ATAPI CDROM]
System Information
[code]....
View 4 Replies
View Related
Jan 11, 2012
I recently built a desktop so that I could play SWTOR, all the parts were salvaged from other computers, but they are all working and compatible, to the best of my knowledge, except for the hard drive, which was broken, so I went out and bought a Western Digital 1 TB hard drive and a new copy of Windows 7 Home Edition. When I got home I plugged the hard drive, a SATA drive, in and popped the install disk in, only right after I got to the "Install Now" button and clicked it did I get this message;No device drivers were found. Make sure that the installation media contains the correct drivers, and then click OKFollowed by;A required CD/DVD drive device is missing. if you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step
View 7 Replies
View Related
Jul 4, 2012
So, as @karlsnooks and @golden had said, I downloaded an ISO file from Official Windows 7 SP1 ISO from Digital River � My Digital Life.And using a Windows 7 USB/DVD Tool, I burned it into a USB stick.Now, when I boot from it, I get to the Window home screen, and when I proceed, I get this message:"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step." <Browse> <OK> <Cancel>When I browse and point it to the Boot folder, this message comes:No device drivers were found. Make sure that the installation media contains the correct drivers and then click OK.
View 9 Replies
View Related
Nov 6, 2012
Its my own fault, I was doing this in a daze. Having installed the new SSD and gone into Windows 7 setup, I thought id created a new partition on the drive for Windows to go on. Anyways, Windows was saying there was some sort of problem, so I thought, ok , rinse & repeat - and so I hit delete...Now nothing is showing up in the drive list. It is visible in bios - and I've since used the OCZ boot disk and did a secure wipe. Still nothing. So I used a PartitionWizard boot disc, and created a brand new NTFS system partition. Still nothing. Do I need some drivers or something? Setup does say I could use a disk to find some...
View 5 Replies
View Related
Jun 28, 2011
I have a HP dv9920us. A month ago I upgraded to win7 from vista. Everything was working fine until a couple of days ago when returning from work I found a black screen and an error message " no operating system found". No attention paid since I thought that my hdd went bad. So got a new one installed it but got the same message. So went into BIOS and saw that no hdd was detected. My laptop has 2 sata ports so I changed port and to my relive BIOS recognized my hdd in this 2nd port leading me to believe that the first port had gone bad. I did a clean win7 install. Everything went fine. Installed drivers etc no problem. During the first boot after and right after the post message the laptop just suddenly shut down and rebooted and then shut down again just after the post message. This loop went on for a couple of times and finally ended to a black screen with the message " no operating system found". Checked the BIOS again and the hdd was there. Booted the machine with the installation dvd in the drive this time and after the same loop for a couple of times (boot-post message- shut down- reboot ) instead of going to the no "operating system found" it continued and loaded win7. I've performed every possible test that I know for checking memory, hdd etc and everything looks good. The bottom line is that now the only way that I can use my laptop is to boot it with the installation disc in and it loads and works perfectly. If I try to boot it without the disc I end up with the "no operating system found".
View 7 Replies
View Related
Dec 5, 2011
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
View 1 Replies
View Related
Sep 7, 2012
i was looking in my programmes and features and i noticed a this added value package i was wondering what it is and do i need it or can i delete?
View 3 Replies
View Related
Jan 5, 2013
i have win 7 pro, 8gb ram, and home made pc. in the past 3/4 days the unspecified error message "win installer package could not open". i downloaded open office and it installs till the end of ms virtual ++ redistributable and the error nessage pops up. i have applied several fixes to no avail. i verified that win installer service was on, and the folder is intact. dont know if one of the files is corrupt? i am stumped. where do i go from here?
View 5 Replies
View Related
Jun 26, 2011
after having lots of trouble in 05/06 regarding the right editing/converting package for my sony dvd camera dcr-dvd605e i had the sony picture package 1.6 or 1.8 i think deleted off my computer by a technition when overhauling my computer. step forward a few years and i have new computer (win7)and would like to know if anyone knows the package that i can use to edit and burn onto dvd that is compatable with win7 and sony dcr
View 2 Replies
View Related
Oct 18, 2011
Every time I try to install the printer on my laptop, toshiba satellite, I reach the point of, failure to install printer drivers. I have tried everything I know clearing disc space off loading old programs, but it will still not load.
View 8 Replies
View Related
May 3, 2012
i need to download picture package program
View 1 Replies
View Related
Jan 31, 2012
Quote: A very punctual Mozilla is set to launch the latest version of its browser on January 31, 2012 as per plan. The new version is a traditional Firefox silent update infused with all the desired components, particularly the disabling of incompatible add-ons and advancement of the compatible ones. Add-ons from Firefox 4 or later will be compatible with Firefox 10. Read More at : Firefox 10 Download Available. Silent Update In The Package. - CrazyEngineers Download Firefox 10
View 1 Replies
View Related
Jul 13, 2010
I am working on automation project in which we are installing the Windows OS on client machine with the help of different OS packages available on server.While installing Windows XP/2003 we are checking for the OS installer packages to get the difference between x86 and x64 architectures.e.g. x86 package contains - I386 folder and PRODSPEC.INI file. and x64 package contains - I386 folder, PRODSPEC.INI and one additional folder AMD64..Is there any such specific folders or file for Windows 7installer package, by using which we can identify that this is for x86 or for x64?
View 2 Replies
View Related
Mar 6, 2009
I am able to connect from XP to a network share at my workplace by giving login/password. However, when I try to connect from Windows 7 i get the error: "specified authentication package is unknown"
However, I am able to connect to another shares. From XP no one is having any problems in connecting to this share at all. Have googled but to no avail. Found one suggestion to add 'authentication packages' key to registry but it was already present in my Win 7 and with the correct value.
Any help would be appreciated as I am at my wits end with this issue. Win 7 is working flawlessly otherwise. Much much better than XP. Vista was pretty much unusable on my laptop (HP TC 4400 tabletpc)
View 5 Replies
View Related
Dec 18, 2012
I have windows 7 Home premium. I am unable to change to windows 7 basic in aero package, it is grey and cannot load. theme is stuck in windows classic. wondering if I need to reinstall windows 7.
View 1 Replies
View Related
Jul 16, 2012
I have a piece of software that displays a 6 point font near the upper left of the screen, is there a freeware package that will stay on this area of the screen and will not disappear? I would love to have this magnifying glass work like the lens function in the windows 7 magnifying glass but just to stay put.
View 7 Replies
View Related
Jul 29, 2011
Recently, a Windows update arrived called Microsoft Security Essentials Client Update Package - KB2544035. Since then my computer started malfunctioning. Whenever, I try to install the update, everything goes fine, and then suddenly goes blank and the desktop returns (but the Windows update screen had closed). When I open Windows update, it shows that the aforesaid update is not installed. And when I try to open Microsoft Security Essentials shortcut on my desktop, the machine is not able to find it and asks to delete it. I can't even open Microsoft Security Essentials manually from Program files. Things return to normal on System Restore. But the Microsoft Security Essentials appears potentially unprotected and asks for a full system scan. But before the scan is complete the Microsoft Security Essentials screen closes and the desktop returns once again. And, once again, when I try to open Microsoft Security Essentials shortcut on my desktop, the machine is not able to find it.
View 8 Replies
View Related
Jan 1, 2013
I just got a brand new computer for christmas, it's a hp compaq dc5850, and it was working fine until now! I tried turning the computer on and it got stuck at the blue hp invent screen, I didn't know what to do, so I finally decided to just try and restore it. When I try to use the windows 7 disc to do this it keeps saying "no drives were found. Click to load driver to provide a mass storage driver for installation".
View 1 Replies
View Related
Jun 28, 2011
i'm just looking for softwear for the laserjet 1600 printer for windows 7 , becuase i lost my CD driver and i can't find the softwear in the internet , so can you tell me from where i can download it from the internet.
View 1 Replies
View Related
