"no Drives Were Found. Click To Load Driver To Provide A Mass Storage Driver For Installation"
Jan 1, 2013
I just got a brand new computer for christmas, it's a hp compaq dc5850, and it was working fine until now! I tried turning the computer on and it got stuck at the blue hp invent screen, I didn't know what to do, so I finally decided to just try and restore it. When I try to use the windows 7 disc to do this it keeps saying "no drives were found. Click to load driver to provide a mass storage driver for installation".
emachine EL1200, AMD Athlon 64, Boxer 61 MB DA061L, 08120-1, 48.3V801.011. 2GB RAM, SATA HDD. Originally Win Vista but upgraded to Win 7 home premium 32 bit which worked ok. Problem - at boot up the following happens: verifying DMI pool data...update success, boot from CD, bootmgr is missing, press ctrl+alt+del to restart. inserted win 7 CD, installation progresses to stage where i get error message: no drives were found.click load driver to provide a mass storage driver for installation.
Okay so, my laptop's system is unable to boot, so I just tried to format it since I have to do that for a very long time, and when it asked me in which partition I want to install windows there was nothing, although when I clicked "Load Driver" I could access the hard disk's files, the hard disk IS listed in the bios normally but windows does not recognize it, I tried using Kaspersky Rescue disk(the only CD I had along with the recovery disk)and when I used the File Manager, the hard disk still didn't show, are there any drivers I have to install?I have burned both fujitsu9that's my laptop) and Seagate's websites and can't find anything, I have searched forums but the only answers were "check if your hd is listen in bios".So, i IS listed in bios but I can't reinstall windows nor access it
i just installed Windows 7 64bit on My Laptop [code] After it installedi it. i had a 1 Conflict in My Hardware Device List it said i had No Driver Installed on The Mass Storage Controller. i have tried using the gateway drivers but it said it would not work with this Version of Windows.i tried doing Windows Update it says no Drivers Found any clues where i can get one?????
i just installed Windows 7.. 64bit on My LaptopGateway MT6451 Chipset ATI Xpress 200 (RS480) Rev 10 Southbridge ATI SB400 Rev 80BiosBrand Phoenix Technoligies LTDVersion 84.06After it installed it. i had a 1 Conflict in My Hardware Device List it said i had No Driver Installed on The Mass Storage Controller. i have tried using the gateway drivers but it said it would not work with this Version of Windows.i tried doing Windows Update it says no Drivers Found
I turned on my computer a couple of days ago and found that my entire hard drive had been erased including the operating system. When I tried to reinstall the OS it asked me to load a mass storage driver.
I have got very lucky and acquired a Microworks Black-Hawk XR-5 gaming laptop. Basic story is that my father's company purchased it to run a very complicated program and the laptop ended up not working with it. So it's been collecting dust for years until I picked it up and began using it. The laptop had XP on it when I got it, but I soon installed Windows 7 and that went rather smoothly, except one thing. The Mass Storage Controller is missing a driver? Windows can't seem to figure out what driver I need either, as going through the automatic updates solves nothing and it keeps telling me that Windows can't find the driver software. I'd simply go to the manufacturer and find what driver I need, however, Microworks seems to no longer have a page.So, I have absolutely no idea what to do.
I have an HP G60 440US notebook, It has vista premium edition.I am trying to upgrade it to windows 7. The issue i am having is when 7 wants to start the install a box pops up and reads some think like Mass storage driver not installed. How is this fixed so i can finish installing 7 on my notebook?
I have this issue going on since i installed windows 7--32 bit on a new partition.
Firstly In the 'device manager' I see 'Mass Storage Controller' which shows me a yellow sign of exclaimation & the following message pops up when 'right clicked' on 'properties' ;''The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver''
Secondly;In the 'device manager' below the 'Mass Storage Controller' name/driver it shows a name/driver called 'Unknown Device' again with yellow sign of exclaimation as mentioned above & When 'right clicked' on its properties I get the same error message as mentioned above.
Thirdly;None of the External buttons on my laptop for web cam,volume etc present are working. They only work with my vista OS but not with windows 7.
Now What drivers do u recommend & Where can i find the specific drivers for windows 7 beta to function without any further driver issues or other issues as mentioned above
Also When i plug in my usb external hard drive it shows me a message ''Do u want to scan the drive or continue without scanning'' & i tried both the ways/methods but still my files stored in usb e.xternal hard drive drive freeze & therefore dont respond immediately when i try to view or open them. Did reinstall, update everything but couldnt solve it.
For over a month now I have been trying to get the mass storage driver to work in Windows 7 x64 OS system. I have upgraded the drivers from the website and that didn’t work. Then I posted the question on your forum and someone had sent me to another driver that still didn’t work.
In Windows 7 x64 it will not install and recognize any driver for the mass storage driver even after installing the driver package that I downloaded from the site. Also, it seems without the mass storage driver working Windows 7 x64 will not recognize my other drives that attached to a PCI IDE card that Windows 7 does recognize and functioning properly.
I changed my wireless modem password with the comapny the other day and since then, I can not print from my computer. I do see that my printer is set on default.
I am installing Windows 7 on my Compaq Presario SR5010NX. SATA hard drives and IDE hard drives both detect and are visible in Setup (BIOS) as well as in my existing Windows 7 which is on a small 37 Gb SATA. When I try to install Windows 7 onto a new SATA hard drive 1.0T it wont show up in the window to select it for installation. The next window says to brows to the device driver to install it in the system. It describes the needed driver as a 'Mass Storage Controller Driver' which I cannot find anywhere. WTF do I do ?
I have a Sony Vaio VGN-SZ4MN Notebook. My pendrive [USB Stick] does not work also my Vaio webcam does not work either My screen size is only 3/4 display...I have window 7 OS...
Fresh install loading Windows 7 it asks for mass storage device driver with CD for motherboard open on Z77-DS3H and drivers available where is mass storage?
i need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
I have Compaq Presario CQ61-405SF and i try to doing clean installation of windows 7 but setup can not find my hard disk and i need to find Mass storage device driver. find mass storage of my laptop
Sony Viao VGN-CR220E notebookprevious os is windows vistarecently replaced it by windows 7 home premium 64 bitnow problem is mass storage controller driver missing. so memory stick reader doesn't work. from where i get this driver
