I have my netbook dual-boot WinXP and Windows 7. (I used EasyBCD for the dual-boot setup.)In booting into Windows 7, I used to have the option of the "repair your computer", which brought one several useful tools, if there is problem booting.Of course, the exact same tools are on the Windows 7 setup DVD, which I have. However, with a netbook, I don't always have the USB DVD drive with me, or the DVD, and that recovery stuff boots up much faster from the HDD partition, than from the DVD. So I think it is good to have.(Not at all like the notebook manufacturers recovery partitions. I wouldn't want to use those at all, wiping out all my data.)Recently I upgraded to a larger HDD. I used Acronis to clone my old HDD (at that time in the notebook) to the new HDD (attached via USB enclosure). (It was an older Acronis version, long predating Windows 7. I don't know if I would have had better results with a new version.)Well, at first I could not boot at all, with the new HDD installed. I was able to fix that though. (I forget the details of it at the moment.)Also, my drive letters (I have four partitions-drives) were messed up, so somehow the Acronis cloning did not keep that information, and I had to fix that in both XP and 7, with Disk Management.For the most part though, my partitions were all intact in the new drive. Being a larger HDD, I increased the size of a couple, in the Acronis interface.I realize now though, that I do not have the recovery boot-up option any more. That can show up while booting into Windows 7 and pressing a key, but if one chooses it, it just tells one to put in the Windows 7 DVD. Therefore, that option of booting from the recovery partition seems to be gone.Looking in Disk Management from Win 7, I see an unallocated partition, I think about 8.98 GB, I think. Is that the Windows 7 recovery partition? Did Acronis copy it correctly, but somehow the boot sector on the new drive cannot access it?
I'm trying to restore my computer to computer factory settings?I've made the 4 discs, but every time it tells me to insert the next disc (not even the number). I've inserted in all 4 of them and none of them seem to get the recovery to continue.Is there a way to recover from the partition?
I decided to recover the windows and I haven't made the recovery disc yet, so I will recover from from windows directly from hp recovery systemI just want to know how many times can I use this option for later?
my problem is the partition in my notebook was deleted, so may data in this partition. I want to recovery the partition that was deleted, How to recovery this issue.
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
The other day I accidentally deleted the local hard disk partition (contains win 7 OS), instead of the external thumbdrive. Now there are no partitions that exist on the drive at all. The data and files are in there but are in a non allocated space.. what is the best way to reverse this mistake .
I am doing a windows 7 recovery for my asus laptop and I have 3 options:
1) Recover windows to first partition only. 2) Recover windows to entire HD. 3) Recover windows to entire HD with two partitions.
I don't know what any of this means so an explanation of this choices would be great. Also, I would like to keep some of my old files like my itunes, which option will allow me to do that?
I'm fixing my friends laptop and for some reason windows has gone haywire. Its a sony laptop so I could use the recovery partition and recover vista. The other option would be to go the campus computer store and buy a copy of windows 7 for $20. My reason for consider buying windows 7 is that is may provide a boost in the battery and most importantly, I think the laptop will run alot smoother with windows 7.
So should I get my friend to buy windows 7 or should I just recover vista?
i had windows 7 home premium and i had to formatt the HDD because was a problem with the windows installation, could not do recover because got into a eternal loop the system and had to use a version that friend of mine lean to me of windows 7 i do not erased the recover partition and i wish have access to this partition to get my windows version or try of install it from there again and have my own windows copy, how could i get access or unlock the recover partition and get the files and install windows from there.
So the other day I decided that I wanted to try dual-booting Ubuntu 10.04 on my HP Pavilion dv7-4083cl Entertainment Notebook that already had Windows 7 Home Premium 64bit installed. I shrank the main (biggest) partition by 100Gigs and then installed Ubuntu 10.04 on that 100Gigs of unallocated space. All worked fine, except when I tried to boot Windows 7 from the grub menu, it would come up to the beginning Windows 7 animation and then it would crash. So, I downloaded a Windows 7 Recovery CD and tried a few of the tools there. I did not create a system recover image prior to my troubles, so I could not recover the easy way.
After that, I tried the Startup Repair tool, which did not work. I read somewhere to try that Startup Repair tool 2 or 3 times, which I did. The third time, it seemed to freeze; it was "working" for about 6 hours, at which point I decided that it was enough and shut down the PC. That was a mistake... From that point forward, I still could not boot into Windows, but also every time I tried to boot into Ubuntu, I had to perform a disk check, which always failed! After trying that a few times, I had had enough yet again and decided to just reinstall Ubuntu. The install seemed to work fine, but once I rebooted I could not boot into Ubuntu (or Windows 7). No matter what option I select from the grub menu (or if I push F11 to go into recovery partition), it gives me an error that says "Error: No such partition" and dumps me into a grub rescue prompt...
After releasing multiple bouts of turrets, I tried booting from my Ubuntu LiveUSB again (same one I installed Ubuntu with twice) and ran Gparted to look at my partitions. It only showed me the one 100Gig partition and said the remaining ~350Gigs were unallocated! So now I'm stuck with no bootable operating system (on my HD), and to top it off, HP just sent me their "official" recovery disks that are trying to reformat my HD and erase all my data...
I know there has to be a way to restore my partitions and replace the grub bootloader with the Windows 7 bootloader. At this point I don't care about Ubuntu at all. All of my data was on the Windows 7 partition (which I cannot access from Ubuntu to grab it).
I can provide any information that you need, but remember that I can only do so via either BIOS or by booting Ubuntu from the LiveUSB. I cannot access Windows 7. I also do not have a Windows 7 install disk as this was a refurbished HP laptop that I bought from Costco...
is not empty - it is almost 80% full but when i click on it there are no files. Tried - to the extent of my knowledge - to see if the files are hidden but didn't reach anywhere. Tried a restore point but that didnt work either.
my 5 month old computer would no longer boot, it automatically ran start up repair, after about 6 hours said could not repair, took me to restore, but then said couldn't restore due to I/O error, tried recovery option with data back up with disks but get fail due to I/O error, tried again on the complete factory restore and got error of not enough memory to complete. can I recover my system?
I do not know how or why but some files that I have been using were just gone when I went to find them. The files where in a word document with other files which are still there.
When I first started using Windows 7 I had a windows XP partition along with a windows vista. I had all 3 OS's running smoothly and of course fell in love with 7. After getting my hand on a copy of 7 Ultimate I decided to buh bye Vista and Hello 7 as a whole OS, mind you I kept the XP installation running as well. After thinking about it for a while I decided to get rid of XP for good and just go with 7 to rule my PC, and somehow in the process I have the partition that used to be XP unoccupied but yet cannot use it.
It says it is a Health (system, Active Primary partition) this is a 150GB partition which completes the other half to where my windows 7 is. I want to recover that space so I can have one full 300GB. How can I do that, and any ideas how I messed that up? My system is working fine as it is, and I can really live with it, but mind you that's 150GB of space that's just not being used.
I was thinking partition Magic could help me on this one.
used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.
While in command prompt under diskpart I accidentally "cleaned" one of my external HDD, I have 3 partitions on it, 2 I recovered with EaseUS Data recovery, but the third I am having problems with. I bitlocked it and now have no idea how to get it back. I have the recovery key, and password!
I recently did a clean install of Windows 7 from CD and lost all applications and files and drivers. Is there anyway to recover them. I chat get online cause I don't have a driver attached to devices.. Is there anyway to attach the drivers to devices? And if I have a partition drive how do I recover from the partition?
i use window 7 Ultimate Edition , i have two Partitions in 320 HDD, d drive is encrypted by bitlocker. after some time i access this drive its give me wizard , drive is not formated. i formated the drive. after that my data is lost.
the thing is iv accidentally performed a quick format on an WD Green 2TB drive with XP pro installation. what i want is to recover the whole complete partition as it was (1 ntfs partition was on the disk) include names/structure and all. i dont have a 2TB space to image the disk, so all the recovery tools should be nondestructive, however i do have 2TB free to recovering to.Just to be clear the disk didnt have an os on it, it wasnt the primary,but a storage?
I've been using TrueCrypt 7.0a to encrypt the partitions on my external and internal hard drives for quite some time now. In fact, because I had no other available space, I copied a disc iso to one such partition just last night? This morning, however, when I try to mount and access that partition, Windows won't recognize the mounted partition, and when I run "repair filesystem" from within TrueCrypt -- the equivalent of running chkdsk from a command prompt, I get: Corrupt master file table. Windows will attempt to recover master file table from disk. After a lengthy wait (it IS a 250GB partition), it returns the message I least want to hear: Windows cannot recover master file table. CHKDSK aborted.
I have Windows XP64 and XP 2005 installed on adjacent partitions on an 80 GB IDE hard drive. I had been accustomed to using BIOS to choose the drive and EasyBCD to choose the OS. A few days ago I was unable to boot into this drive because I kept getting the error "NTLDR missing (press Ctrl-Alt-Del)." I tried using Microsoft's BCSetup2 (I think that's what it's called) but couldn't get a floppy disk to boot.
Being that there wasn't much on this hard drive, other than the Windows OS's, I decided to reinstall the Win64 on the first partition. I find now that EasyBCD does not install on my XP64, so evidently I must have had it installed on the XP MCE partition. I'm wondering now how I can go about accessing the MCE on that other partition, or finding or remaking the boot loader.
I have an HP Mini 110-3000. I think I have pretty messed up with the boot configuration. However, I still have an HP_RECOVERY partition intact and another partition named BOOT (X. There is no OS installation on any of the drives, though BIOS shows a Win 7 installation. The main issue is that I want to do a factory restore using the HP_RECOVERY partition. The partition is already set to active. But when I boot it gives me a WINDOWSsystem32winload.exe file missing ot found. Already I have rebuild the BCD. What must I do to make this system use its HP_RECOVERY partition to do a factory restore.
I was installing windows 7 on a mac. Complications arose and i just formatted the hard drive and installed windows. I just realized i left a few files on the mac side that I need. I know that you can recover stuff after deleting them as long as you dont overwrite the hard drive, the problem is, i partitioned it for windows. Can i still get those files back even tho i partitioned it?
I'm upgrading a Compaq Presario running XP that has a recovery partition installed by the manufacturer. It's my understanding that the recovery partition will be useless after the upgrade. Should the drive be reformatted and the partition deleted?
I deleted my partitions by mistake. Drive originally had 2 partitions, 100MB (Windows 7 setup partitiion) and 930GB (Data storage partition). In summary:
1) I deleted the 100MB partition (because disk is(was) now storage disk) and 930gb partition were deleted too. 2) I started following a guide from microsoft and re-create the 2 partitions as RAW (without format). 3) I deleted the 2 raw partition and created a full space partition to the disk QUICK FORMATTING NTFS. 4) Started to try "Recuva" but most of the files recovered (1,000,000 files) are broken, i tried the option to recover Folder Structure but fails.
Is there any way to recover the files and Folder Structure properly? Except of the partitions deletions/creations I didn't write anything inside the disk.
I have previously installed windows 7then for trial purpose installed ubuntu on pimary drve C:However it doesnot installed properly and now again i have installed windows7 ...it is perfect but others partition drives are not accesible.
I have a Dell XPS laptop. I reinstalled windows a weeks ago using an oem disc.Since then i have notice my sound sometimes stops working. I would like to reinstall to factory. I booted and pressed f8 then clicked repair windows. At the repair menu the dell factory reinstall option is missing.
