Recover Partition Disk Accesesibility After Uninstallation Of Ubuntu?
Feb 22, 2012
I have previously installed windows 7then for trial purpose installed ubuntu on pimary drve C:However it doesnot installed properly and now again i have installed windows7 ...it is perfect but others partition drives are not accesible.
So the other day I decided that I wanted to try dual-booting Ubuntu 10.04 on my HP Pavilion dv7-4083cl Entertainment Notebook that already had Windows 7 Home Premium 64bit installed. I shrank the main (biggest) partition by 100Gigs and then installed Ubuntu 10.04 on that 100Gigs of unallocated space. All worked fine, except when I tried to boot Windows 7 from the grub menu, it would come up to the beginning Windows 7 animation and then it would crash. So, I downloaded a Windows 7 Recovery CD and tried a few of the tools there. I did not create a system recover image prior to my troubles, so I could not recover the easy way.
After that, I tried the Startup Repair tool, which did not work. I read somewhere to try that Startup Repair tool 2 or 3 times, which I did. The third time, it seemed to freeze; it was "working" for about 6 hours, at which point I decided that it was enough and shut down the PC. That was a mistake... From that point forward, I still could not boot into Windows, but also every time I tried to boot into Ubuntu, I had to perform a disk check, which always failed! After trying that a few times, I had had enough yet again and decided to just reinstall Ubuntu. The install seemed to work fine, but once I rebooted I could not boot into Ubuntu (or Windows 7). No matter what option I select from the grub menu (or if I push F11 to go into recovery partition), it gives me an error that says "Error: No such partition" and dumps me into a grub rescue prompt...
After releasing multiple bouts of turrets, I tried booting from my Ubuntu LiveUSB again (same one I installed Ubuntu with twice) and ran Gparted to look at my partitions. It only showed me the one 100Gig partition and said the remaining ~350Gigs were unallocated! So now I'm stuck with no bootable operating system (on my HD), and to top it off, HP just sent me their "official" recovery disks that are trying to reformat my HD and erase all my data...
I know there has to be a way to restore my partitions and replace the grub bootloader with the Windows 7 bootloader. At this point I don't care about Ubuntu at all. All of my data was on the Windows 7 partition (which I cannot access from Ubuntu to grab it).
I can provide any information that you need, but remember that I can only do so via either BIOS or by booting Ubuntu from the LiveUSB. I cannot access Windows 7. I also do not have a Windows 7 install disk as this was a refurbished HP laptop that I bought from Costco...
I have been trying to install Ubuntu in my lappie..unfortunately the process got aborted during the boot loader installation.Now am trying to un install it completely and trying to install windows 7 on my PC.But i get error when windows 7 installation kit is trying to "Expand windows files."
Tools in hand : Ubuntu live CD windows 7 boot CD
I have no OS currently in my PC
Previously installed one was windows 7 which has been completely formatted during my ubuntu installation.
P.S : I dont want the data in other logical disks to be deleted.
Recently I installed ubuntu 11.04. Now I have deleted the ubuntu partition using windows disk management. Now I can't boot the windows os! Even I tried the FIXMBR commands! Now it is showing 'BOOTMGR not found".
I deleted the Ubuntu 10.04 partition in windows computer management/disk management. Then i shut down the computer, upon booting up i was greeted with an grub error and unable to boot into windows. I used super grub disk, now windows boots up fine now. I'm left with this now, three other partitions and a 218gb of free space. How can i allocate my free space (218gb) to my C: drive? I right click my C: drive but the extend volume is grayed out. Only the Shrink volume is selectable.
Im using dell inspiron 1564.this is a dual boot system-(windows7 & ubuntu). Recently my system got affected by viruses. Even-though i have a working antivirus I get frequent pop-ups saying "threat detected". I'm tired with deleting those viruses. so decided to restore system from OEM partition to get rid of all those viruses. before installing ubuntu I had a single partition (c:), then i made it into two partitions one for ubuntu clean install. now if I restore my system to factory settings from OEM of windows7 will the partition of ubuntu get formatted or deleted?
I am working on windows 7 (64 bit ) . Can i have Ubuntu installed in another partition ? I tried to install ubuntu but unable to complete the process. Is it because Ubuntu works only on 32 bit ? or the installation CD corrupted ?
I deleted the ubuntu partition now windows wont boot. I have tried the recovery disk and tried "bootrec /fixmbr" but it didnt work.Now the win7 installation is not showing up in the recovery console.When I turn the laptop on I get "Insert System Disk in drive Press any key when ready".
i have Ubuntu dual booted with windows 7 32 bit, i am running out of space on my hard drive and am not using the 100 gigabytes i partitioned of for Ubuntu, i was hoping that someone might know how to change the partition size as i cant find out how to do it.
I have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.
My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.
My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?
Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?
When I first started using Windows 7 I had a windows XP partition along with a windows vista. I had all 3 OS's running smoothly and of course fell in love with 7. After getting my hand on a copy of 7 Ultimate I decided to buh bye Vista and Hello 7 as a whole OS, mind you I kept the XP installation running as well. After thinking about it for a while I decided to get rid of XP for good and just go with 7 to rule my PC, and somehow in the process I have the partition that used to be XP unoccupied but yet cannot use it.
It says it is a Health (system, Active Primary partition) this is a 150GB partition which completes the other half to where my windows 7 is. I want to recover that space so I can have one full 300GB. How can I do that, and any ideas how I messed that up? My system is working fine as it is, and I can really live with it, but mind you that's 150GB of space that's just not being used.
I was thinking partition Magic could help me on this one.
I need to create a new partition for Ubuntu, but I have the maximum number of partitions. I have tried converting the disk to dynamic, but it says that there is not enough space available for that. What should I do? (The 75 gb unallocated space is where Ubuntu should go)url...
my problem is the partition in my notebook was deleted, so may data in this partition. I want to recovery the partition that was deleted, How to recovery this issue.
used gparted to copy partition from windows7 laptop to usb ext HD as ntfs partition. iam am able to view files and evrything ok. when i reboot into win7 it sees partition as RAW. its says i need to format it.
While in command prompt under diskpart I accidentally "cleaned" one of my external HDD, I have 3 partitions on it, 2 I recovered with EaseUS Data recovery, but the third I am having problems with. I bitlocked it and now have no idea how to get it back. I have the recovery key, and password!
I recently did a clean install of Windows 7 from CD and lost all applications and files and drivers. Is there anyway to recover them. I chat get online cause I don't have a driver attached to devices.. Is there anyway to attach the drivers to devices? And if I have a partition drive how do I recover from the partition?
I used to have a seperate Linux Partition on my Hard Drive.I no longer use Linux and uninstalled the Ubuntu Operating System from the partition and re formatted the partition in windows, but when i go to the Hard Drive Partitioning Utility with Windows wont allow me to re expand my main partition to include the other, now empty NTFS formatted, partition.
I am thinking about dual-booting my system with Windows 7 as the main OS, and linux ubuntu as a secondary. I have a few questions:
1. How much space should I leave for ubuntu's partition? 2. How do I make a swap partition (or whatever it is called, for swapping files between OS's)? 3. Can I set it up to automatically boot into windows unless I am holding down a specific key, or something similar?
BTW, my HDD is ~500gb, but my current (factory) windows partition is 450gb.
How can I recognize in ubuntu, locked disk (by bitlocker win7 x64). I lost bitlocker code, morover I lost my windows too. Recently I could'nt install win 7, it asks me bitlocker code. I wanted to copy all my data using ubuntu (it is in bootable USB flash), but ubuntu doesn't show this disk.
I'm trying to restore my computer to computer factory settings?I've made the 4 discs, but every time it tells me to insert the next disc (not even the number). I've inserted in all 4 of them and none of them seem to get the recovery to continue.Is there a way to recover from the partition?
i use window 7 Ultimate Edition , i have two Partitions in 320 HDD, d drive is encrypted by bitlocker. after some time i access this drive its give me wizard , drive is not formated. i formated the drive. after that my data is lost.
The other day I accidentally deleted the local hard disk partition (contains win 7 OS), instead of the external thumbdrive. Now there are no partitions that exist on the drive at all. The data and files are in there but are in a non allocated space.. what is the best way to reverse this mistake .
I am doing a windows 7 recovery for my asus laptop and I have 3 options:
1) Recover windows to first partition only. 2) Recover windows to entire HD. 3) Recover windows to entire HD with two partitions.
I don't know what any of this means so an explanation of this choices would be great. Also, I would like to keep some of my old files like my itunes, which option will allow me to do that?
the thing is iv accidentally performed a quick format on an WD Green 2TB drive with XP pro installation. what i want is to recover the whole complete partition as it was (1 ntfs partition was on the disk) include names/structure and all. i dont have a 2TB space to image the disk, so all the recovery tools should be nondestructive, however i do have 2TB free to recovering to.Just to be clear the disk didnt have an os on it, it wasnt the primary,but a storage?
I have my netbook dual-boot WinXP and Windows 7. (I used EasyBCD for the dual-boot setup.)In booting into Windows 7, I used to have the option of the "repair your computer", which brought one several useful tools, if there is problem booting.Of course, the exact same tools are on the Windows 7 setup DVD, which I have. However, with a netbook, I don't always have the USB DVD drive with me, or the DVD, and that recovery stuff boots up much faster from the HDD partition, than from the DVD. So I think it is good to have.(Not at all like the notebook manufacturers recovery partitions. I wouldn't want to use those at all, wiping out all my data.)Recently I upgraded to a larger HDD. I used Acronis to clone my old HDD (at that time in the notebook) to the new HDD (attached via USB enclosure). (It was an older Acronis version, long predating Windows 7. I don't know if I would have had better results with a new version.)Well, at first I could not boot at all, with the new HDD installed. I was able to fix that though. (I forget the details of it at the moment.)Also, my drive letters (I have four partitions-drives) were messed up, so somehow the Acronis cloning did not keep that information, and I had to fix that in both XP and 7, with Disk Management.For the most part though, my partitions were all intact in the new drive. Being a larger HDD, I increased the size of a couple, in the Acronis interface.I realize now though, that I do not have the recovery boot-up option any more. That can show up while booting into Windows 7 and pressing a key, but if one chooses it, it just tells one to put in the Windows 7 DVD. Therefore, that option of booting from the recovery partition seems to be gone.Looking in Disk Management from Win 7, I see an unallocated partition, I think about 8.98 GB, I think. Is that the Windows 7 recovery partition? Did Acronis copy it correctly, but somehow the boot sector on the new drive cannot access it?
I've been using TrueCrypt 7.0a to encrypt the partitions on my external and internal hard drives for quite some time now. In fact, because I had no other available space, I copied a disc iso to one such partition just last night? This morning, however, when I try to mount and access that partition, Windows won't recognize the mounted partition, and when I run "repair filesystem" from within TrueCrypt -- the equivalent of running chkdsk from a command prompt, I get: Corrupt master file table. Windows will attempt to recover master file table from disk. After a lengthy wait (it IS a 250GB partition), it returns the message I least want to hear: Windows cannot recover master file table. CHKDSK aborted.
I have Windows XP64 and XP 2005 installed on adjacent partitions on an 80 GB IDE hard drive. I had been accustomed to using BIOS to choose the drive and EasyBCD to choose the OS. A few days ago I was unable to boot into this drive because I kept getting the error "NTLDR missing (press Ctrl-Alt-Del)." I tried using Microsoft's BCSetup2 (I think that's what it's called) but couldn't get a floppy disk to boot.
Being that there wasn't much on this hard drive, other than the Windows OS's, I decided to reinstall the Win64 on the first partition. I find now that EasyBCD does not install on my XP64, so evidently I must have had it installed on the XP MCE partition. I'm wondering now how I can go about accessing the MCE on that other partition, or finding or remaking the boot loader.
I have an HP Mini 110-3000. I think I have pretty messed up with the boot configuration. However, I still have an HP_RECOVERY partition intact and another partition named BOOT (X. There is no OS installation on any of the drives, though BIOS shows a Win 7 installation. The main issue is that I want to do a factory restore using the HP_RECOVERY partition. The partition is already set to active. But when I boot it gives me a WINDOWSsystem32winload.exe file missing ot found. Already I have rebuild the BCD. What must I do to make this system use its HP_RECOVERY partition to do a factory restore.
I was installing windows 7 on a mac. Complications arose and i just formatted the hard drive and installed windows. I just realized i left a few files on the mac side that I need. I know that you can recover stuff after deleting them as long as you dont overwrite the hard drive, the problem is, i partitioned it for windows. Can i still get those files back even tho i partitioned it?
I'm fixing my friends laptop and for some reason windows has gone haywire. Its a sony laptop so I could use the recovery partition and recover vista. The other option would be to go the campus computer store and buy a copy of windows 7 for $20. My reason for consider buying windows 7 is that is may provide a boost in the battery and most importantly, I think the laptop will run alot smoother with windows 7.
So should I get my friend to buy windows 7 or should I just recover vista?